Bartmans AD-S10 Chassis Swap

[av8tr33337]

I started this build a couple years ago and was going with a narrowed 79 Chevy Scottsdale IFS. After months of looking, reading and learning from the guys who have done S10 Chassis swaps, I scrapped the other idea and bought a 94 S10 chassis. I got the cab and front clip mocked up today and will hopefully doing the bed in a few days.


Follow my build here.

http://67-72chevytrucks.com/vboard/s...d.php?t=415418

[masshole]

i'm in..i will be following along because i just got my s10 to do the swap also. so good luck and as many pics as you can post..and i will try and do the same. what are you doing for body mounts? i think i will be fabbing my own but not sure yet... Greg

[RootBeer 6117]

I'll Be watching, I spent 25 years doing alignments/suspension and steering and really liked the 2wd 1/2 gm truck front end,I could replace lower ball joints in 15 minutes per side on good days, 6117 is the moog lower ball joint number- 73-87. If it wasnt for cutting the crossmember I would go that route in a minute, but S-10 it is.

[av8tr33337]

Thanks guys. I guess I made a mistake and posted this build in this forum as well as the 47-59 forum. To refrain from double posting and taking up space and bandwidth I will do my updates on the 47-59 forum. If you subscribed to this thread you might want to go to the link in my signature and subscribe there instead. Thanks and sorry for the hassle.

[T Hilde]

Actually this is the build section of the 47-59 forum.