|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-01-2003, 03:21 PM
|
#1 |
|
Registered User
Join Date: Apr 2000
Location: Camillus, NY USA
Posts: 79
|
Vortec Head Question: Temp sensor
I just installed a set of Vortec heads. On the driver's side where the temp sensor should go is a pipe plug. Problem is, it's recessed and SQUARE. Been to every parts store in town. Can't find a tool to get the dang thing out. I've got plenty of hex wrenches, but no square ones.
Anybody know where to get a tool to get this thing out ? Measures out to about 8mm. Is it something I have to get from from the General or is there another way. Also, it looks smaller than the temp sensor from my old heads. What are you using for a sensor ? David
__________________
1972 Chevy Cheyenne Super LWB Chevy Red/White with rally wheels. Not-so-Stock 350, A/T, A/C, tilt. Vroom, Vroom.... ===================== David Colbert dcolbert@twcny.rr.com Work hard, play harder! |
|
|
|
06-01-2003, 03:25 PM
|
#2 |
|
Registered User
Join Date: May 2003
Location: Phoenix, AZ
Posts: 104
|
Stick your rachet extension in there as if you were plugging it into a socket
|
|
|
|
|
06-01-2003, 04:01 PM
|
#3 |
|
Registered User
Join Date: Apr 2000
Location: Camillus, NY USA
Posts: 79
|
Tried a ratchet extension. 3/8 is too big, 1/4 is too small.
D
__________________
1972 Chevy Cheyenne Super LWB Chevy Red/White with rally wheels. Not-so-Stock 350, A/T, A/C, tilt. Vroom, Vroom.... ===================== David Colbert dcolbert@twcny.rr.com Work hard, play harder! |
|
|
|
|
06-01-2003, 04:07 PM
|
#4 |
|
Registered User
Join Date: Feb 2002
Location: Moore OK 73160
Posts: 974
|
go to home depot or lowes to get a pipe plug socket
__________________
04 GMC Sierra RCSS 70 CST LWB 04 HD Sportster 1200 Custom |
|
|
|
|
06-01-2003, 04:18 PM
|
#5 |
|
Registered User
Join Date: May 2003
Location: Phoenix, AZ
Posts: 104
|
sometimes you get lucky, but now I agree with above.
|
|
|
|
|
06-03-2003, 08:42 AM
|
#6 |
|
Registered User
Join Date: Apr 2000
Location: Camillus, NY USA
Posts: 79
|
The Vortec heads look like they have a smaller diameter opening for the temp sensor than the stock replacement for our year.
What type/year temp sensor are you guys using? Any problem with our gauges? The pipe plug size is 5/16". A tap shank that I have fits perfectly, but I can't get a good enough grip on it to get the plug out. Now I just have to find a suitable socket tool to get the sucker out. David
__________________
1972 Chevy Cheyenne Super LWB Chevy Red/White with rally wheels. Not-so-Stock 350, A/T, A/C, tilt. Vroom, Vroom.... ===================== David Colbert dcolbert@twcny.rr.com Work hard, play harder! |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
