Anyone seen these seats before???

[slb1985]

went to my local u pull it just to look around and seen these...they r what i wanted my seats to look like but dont know what they r from or if they will fit.. the pics that have bolts in the slide are bolted what appears to be factory location on the driver side but the slide is missing off the pasenger side but if they bolt up to factory mounts can i use my exsisting tracks? oh yeah they r sitting in a 79ish sierra grande dont know if u needed it or not... any help would be great also what might the be worth so i dont over pay and maybe feel like i get a deal if i under pay

[kris's66lwb]

very interesting i also like to know what they are from but those are the factory locations

[nbpro]

Get them, make them work. Where there's a will, there's a way. Those would look sweet if you let Chuck reupholster them for you.

[slb1985]

I'm pretty positive I'm going to just gotta talk the wife into lettin me then to reupholster there is a mom and pop shop round the corner or chuck but he told soomeone he can't cover them without a set to Measure or somethin like that but. Once he up and operational gonna look into it. I'm going to get dash and doors from him and would like for material and stitching to match
Posted via Mobile Device

[MotorHead Lon]

I'm going strictly on memory but I think those are the same as what my grandad had in his 79, except his were blue vinyl. I think he ordered them from JC Whitney. I was only 5 or 6 then, but I remember dad and him swapping that seat for the bench seat.

[Stitch]

I can make a new set of seat covers for the seats but you'd have to take the seat covers off and send them to me.
Posted via Mobile Device

[slb1985]

that's great to hear thought I wwould have to ship the seat is putting the cover on hard to make it look good don't want to mess up your work if I put them on wrong lol
Posted via Mobile Device

[slb1985]

Also stitch I have been watching your thread and haven't u put a price up yet ne ideas yet for the combo deal yet
Posted via Mobile Device

[nbpro]

Originally Posted by slb1985

Also stitch I have been watching your thread and haven't u put a price up yet ne ideas yet for the combo deal yet
Posted via Mobile Device

http://67-72chevytrucks.com/vboard/s...2&postcount=91

[slb1985]

Maybe I should've looked through the thread again before the last post
Posted via Mobile Device

[Stitch]

Actually it's in there some where. Let me get to the house and I'll find the post with the prices. But pretty much the package deal in all vinyl is gonna be $550 plus shipping and the cloth and vinyl package is gonna be $600. Your package with those seats is gonna be $100 more than either package because of the extra labor and materials involved.
Posted via Mobile Device

[nbpro]

Originally Posted by Stitch

Actually it's in there some where. Let me get to the house and I'll find the post with the prices. But pretty much the package deal in all vinyl is gonna be $550 plus shipping and the cloth and vinyl package is gonna be $600. Your package with those seats is gonna be $100 more than either package because of the extra labor and materials involved.
Posted via Mobile Device

well there goes my pr job

[81ratrodc10]

there made by kustom seats there a direct bolt in i had them in my old k20 i had

[81ratrodc10]

heres a pic it not a very good one but all i got

[slb1985]

Rat or neone for that matter the passenger track has already been takin but will my tracks from my bench match up to the bottoms of this also I can adjust with a bfh and a drill if I need to just wondering
Posted via Mobile Device


Also thanks for the info ratrod

[nbpro]

It would be hard to say without seeing more pics. But anything can be done if you set your mind to it. Looks like the tracks are similar. May have to cut the thin piece of wire that releases the other side and shorten it. Just a thought.

[slb1985]

OK got another question about the seats,i got them home then started to picture the truck with them in it and realized they don't tilt forward so... i need ideas of a simple hinge to make or where to buy one and weld in place... suggestions