|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-26-2010, 12:03 PM
|
#1 |
|
Blackdawg
Join Date: Aug 2010
Location: North Delta ,British Columbia
Posts: 213
|
newbie chevy 350 can you identify part.
haven"t torn down a chevy engine in 20 years.i have been marking everything keeping the bolts together and even been taking pictures.stuck on two things can you help me identify this part came out after i rolled the block over.i think it has to do with the oil pump.and there still seems to be a shiny piece sticking its head out by the end of the camshaft.i will attach a pic of the piece in question.other question how does the dam cam shaft come out.will it just pull out by the sprocket.i see three bolts at the back of it.square don"t have the right tool.after this clean it up and send to the machine shop.
|
|
|
|
09-26-2010, 12:05 PM
|
#2 |
|
Blackdawg
Join Date: Aug 2010
Location: North Delta ,British Columbia
Posts: 213
|
Re: newbie chevy 350 can you identify part.
|
|
|
|
|
09-26-2010, 01:36 PM
|
#3 |
|
One foot in front of the other
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,459
|
Re: newbie chevy 350 can you identify part.
looks like an oil pump shaft
|
|
|
|
|
09-26-2010, 01:46 PM
|
#4 |
|
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: newbie chevy 350 can you identify part.
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN  "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 09-28-2010 at 02:21 PM. |
|
|
|
|
09-26-2010, 03:28 PM
|
#5 |
|
Registered User
Join Date: Jul 2010
Location: Rio Rancho, NM
Posts: 79
|
Re: newbie chevy 350 can you identify part.
Yes it is an oil pump drive shaft that goes between the pump and distributor.
__________________
---------------------------------------------- 1966 Chevy C10 frame off resto (In progress) 1966 GTO Numbers matching original 1989 Toyota Pickup (Tonka) resto 2002 HD FLSTC 2000 HD FLSTC 1996 Ninja ZX11  Believe nothing of what you hear, and 1/2 of what you see!
|
|
|
|
|
09-26-2010, 06:38 PM
|
#6 |
|
Blackdawg
Join Date: Aug 2010
Location: North Delta ,British Columbia
Posts: 213
|
Re: newbie chevy 350 can you identify part.
thanks guys
|
|
|
|
|
09-26-2010, 06:44 PM
|
#7 |
|
Intentionally Left Blank
Join Date: Dec 2008
Location: Broussard, LA
Posts: 355
|
Re: newbie chevy 350 can you identify part.
That is indeed the oil pump drive shaft. The three "bolts" at the cam location are oil plugs. They don't need to come out to remove the cam. If the cam is stuck, make sure the oil pump drive shaft "sleeve" has come out on the oil pump. It is a small plastic or sometimes metal coupler that connect's the oil pump stub shaft to the oil pump drive shaft.
This one is metal and pinned to the shaft. . Here the oil galley plugs are the pressed in type like freeze plugs. Most of them that I've seen are small pipe plugs with a square head. I hope this helps, Jeff.
__________________
1965 C-10 Short Fleet 468/TKO 5-Speed 2004 2500HD Crew 496/Ally Blacked Out (SOLD!!) 1997 Formula WS6 2004 Jeep Wrangler (Sold) 2013 Jeep Wrangler (Sold) 2017 Jeep Wrangler (Blacked Out on 35's) 2011 GMC D-Max Dually Denali 3500HD (Sold) 2015 GMC D-Max Dually Denali 3500HD (Sold) 2018 GMC D-Max Dually Denali 3500HD (Sold) 2020 D-Max Dually Denali on 33x12.50's 1979 GMC Short Bed Step-Side 4x4 350/350 Low Miles |
|
|
|
|
09-26-2010, 09:13 PM
|
#8 |
|
Registered User
Join Date: Jun 2010
Location: gadsden, alabama
Posts: 468
|
Re: newbie chevy 350 can you identify part.
and dont forget to remove the fuel pump push rod
__________________
Due to financial constraints, the light at the end of the tunnel will be shut off until further notice |
|
|
|
|
09-27-2010, 12:26 AM
|
#9 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,254
|
Re: newbie chevy 350 can you identify part.
That oil pump driveshaft uses the old style nylon coupling sleeve. I would replace it with an aftermarket shaft with the steel sleeve. They aren't expensive and are a recommended upgrade.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
09-28-2010, 12:53 PM
|
#10 |
|
Blackdawg
Join Date: Aug 2010
Location: North Delta ,British Columbia
Posts: 213
|
Re: newbie chevy 350 can you identify part.
yes i surprised with a plastic sleeve.after some hard looking took out the fuel pump push rod and cam shaft came out easy.finally bare block.just soaking the piston tops in varsal to clean up the top and the ring groves.sending the block for hot tank ,honing,crankshaft,camshaft,pistons.will go to the machine shop .i will get them to check crank and cam to see if they need polishing.then get them to assemble pistons,crank,cam.i will do the rest not confident enough for the tolerances.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
