|
03-27-2002, 07:41 PM
|
#4 |
|
Registered User
Join Date: Feb 2002
Location: dillsburg pa
Posts: 115
|
mine has a good amount of play in the throttle shaft blades on the primaries i am wondering if there is something i can do to fix it or if there is a machining process involved. this is going on to an edelbrock manifold will i need some kind of adapter? i am trying to stay away from the edelbrock carb because i am not very happy with the way the one on my blazer works at slow speeds and i heard these carbs are good for offroading.
------------------ 67 k-20 w/327 and a 3speed and 4.57 rear with 17 inch split rims and 9 inch wide rubber(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears and 35 inch bfg tires 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc)
__________________
67 k-20 w/327 and a 3speed and 4.57 rear with 17 inch split rims and 9 inch wide rubber(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears and 35 inch bfg tires. just put out 135 hp to the wheels on the dyno. 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc). it is next in line for a rebuild |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode