Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-08-2010, 10:49 AM | #1 |
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
need pics of mouting hardware for fiberglass toneau cover
I got a frre glass toneau cover free but has no hardware to mount it on the box,anyone have pics of theirs ,then maybe I can make my own,.I can,t buy them seperate.
|
10-08-2010, 11:24 AM | #2 |
Account Suspended
Join Date: Dec 2008
Location: Huntsville,AL
Posts: 2,119
|
Re: need pics of mouting hardware for fiberglass toneau cover
http://www.kcovers.com/hardware-images/ dont know if this will help or not
good luck |
10-08-2010, 12:53 PM | #3 |
Registered User
Join Date: Dec 2009
Location: Fairbanks, AK
Posts: 1,830
|
Re: need pics of mouting hardware for fiberglass toneau cover
What brand is it? I have a snug top but it is 1000 miles away at the moment... Flat metal tabs on the cover that slip through slots that are riveted to the leading edge of the bed in this application...
Posted via Mobile Device
__________________
-Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck |
10-08-2010, 02:57 PM | #4 |
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
Re: need pics of mouting hardware for fiberglass toneau cover
Is a range rider,the back hinge,s is just a peice of flat stock about 2 in. wide with a curve in it so as you lift it about 45 degrees you can tak it off.I phoned the company but they said the frame is farmed out from somewhere else and I can,t buy the frame seperate.Is a solid one piece cover
|
10-09-2010, 03:38 PM | #5 |
Registered User
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
|
Re: need pics of mouting hardware for fiberglass toneau cover
any other pics?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|