vibration at 65-70 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Walts_restoration · 10-21-2010, 12:03 PM

When i drive my 83 2wd c10, i get a vibration at roughly 65-70 mph, but when i drive 60 its fine and when i do 75 its fine. At first i thought it was the road, but now im not so sure. I cant remember if it did it with my other set of tires or not (just put new wheels/tires on the truck from another truck entirely). I went from cheapo passenger car tires to a decent set of lt tires, same size wheels 15x8 rallies. I know the rubber of my carrier bearing is going bad, and when i put it in gear i get a clunk (its an auto), but it almost feels like the front end is where the vibration is coming from and not the driveshaft. Also has new monroe gas magnums, so i know its not the shocks. Should i get the wheels balanced? they looked balanced but i didn't have them done and it was on my parts truck like they are on my own now. Or maybe an alignment issue? but I would think alignment would be a constant thing if it was off. Thoughts?

rob67 · 10-21-2010, 09:05 PM

Sounds like u joints, especially with the clunk you described. I would replace that carrier bearing as well.
Posted via Mobile Device

Davidmichael · 10-21-2010, 09:52 PM

could also be a belt broken in a tire. I would test out the tires. swap them and see if it goes away. At least that's the cheapest.

3r!c84 · 10-22-2010, 01:02 AM

nope stop. take it back to where ever you got the tires from and have them re-balance your tires. (at no cost)

Walts_restoration · 10-22-2010, 09:46 AM

Quote:

Originally Posted by 3r!c84

nope stop. take it back to where ever you got the tires from and have them re-balance your tires. (at no cost)

I don't think my dad will accept returns on the free set of wheels and tires I pulled off one of his parts trucks haha. Gonna talk to my buddies dad about balancing them for me. We have a tire machine but no balancer.
Posted via Mobile Device

3r!c84 · 10-22-2010, 09:54 AM

Oh haha sorry about that
Posted via Mobile Device

*78 Chevyrado* · 10-22-2010, 10:10 AM

alignments can cause vibrations too.

If you goto a tire store chain they usually will check alignments for free. it only costs if they do any fixin on it.

3r!c84 · 10-22-2010, 11:32 AM

very true. a free alingment check. and they will do a quick check oh your ball joints,and tie rods

Keith Seymore · 10-22-2010, 11:40 AM

Normally tire problems start and get progressively more pronounced as you increase speed.

Compared to a tire, the driveline doesn't have as much mass to drive the disturbance. It can only generate that much energy at it's "resonant" point, so normally a driveline problem will have a "unsweet spot" were it's worse and then increasing the speed causes it to get better.

My vote based on what you've said: driveline.

K

10-21-2010, 12:03 PM	#1
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	vibration at 65-70 When i drive my 83 2wd c10, i get a vibration at roughly 65-70 mph, but when i drive 60 its fine and when i do 75 its fine. At first i thought it was the road, but now im not so sure. I cant remember if it did it with my other set of tires or not (just put new wheels/tires on the truck from another truck entirely). I went from cheapo passenger car tires to a decent set of lt tires, same size wheels 15x8 rallies. I know the rubber of my carrier bearing is going bad, and when i put it in gear i get a clunk (its an auto), but it almost feels like the front end is where the vibration is coming from and not the driveshaft. Also has new monroe gas magnums, so i know its not the shocks. Should i get the wheels balanced? they looked balanced but i didn't have them done and it was on my parts truck like they are on my own now. Or maybe an alignment issue? but I would think alignment would be a constant thing if it was off. Thoughts? __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

10-21-2010, 09:05 PM	#2
rob67 Registered User Join Date: Sep 2008 Location: Raleigh, NC Posts: 77	Re: vibration at 65-70 Sounds like u joints, especially with the clunk you described. I would replace that carrier bearing as well. Posted via Mobile Device

10-21-2010, 09:52 PM	#3
Davidmichael Registered User Join Date: Jun 2010 Location: Pittsburgh PA Posts: 686	Re: vibration at 65-70 could also be a belt broken in a tire. I would test out the tires. swap them and see if it goes away. At least that's the cheapest. __________________ 86 Suburban 2WD = rolled it and totaled it 83 LWB STD Cab 4x4 = went to the scrapper. Was my baby. 84 Suburban 2WD = stripped it/ scrapped it 81 8 foot bed made into a trailer 86 Suburban going to be made into a trailer 91 Suburban 4x4 = that's my baby 00 S10 Xtreme STD Cab 01 S10 ZR2

10-22-2010, 01:02 AM	#4
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: vibration at 65-70 nope stop. take it back to where ever you got the tires from and have them re-balance your tires. (at no cost) __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

10-22-2010, 09:54 AM	#6
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: vibration at 65-70 Oh haha sorry about that Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

10-22-2010, 10:10 AM	#7
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: vibration at 65-70 alignments can cause vibrations too. If you goto a tire store chain they usually will check alignments for free. it only costs if they do any fixin on it.

10-22-2010, 11:32 AM	#8
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: vibration at 65-70 very true. a free alingment check. and they will do a quick check oh your ball joints,and tie rods __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

10-22-2010, 11:40 AM	#9
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,180	Re: vibration at 65-70 Normally tire problems start and get progressively more pronounced as you increase speed. Compared to a tire, the driveline doesn't have as much mass to drive the disturbance. It can only generate that much energy at it's "resonant" point, so normally a driveline problem will have a "unsweet spot" were it's worse and then increasing the speed causes it to get better. My vote based on what you've said: driveline. K __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.