Need help with my new cam - The 1947 - Present Chevrolet & GMC Truck Message Board Network

78' Silverado · 06-15-2003, 02:12 AM

Ok, well i went to go look at cams today and ordered on lol. Its a Pro Comp .268 Cam. I have talked with alot of people and they say its to low, the guy who i talked with said it would be great cuz i am a daily driver but love to race alot. I dunno.....Some people said i need to get a cam in the .4 range atleast lol. My engine is a 4 Barrell Goodwrench 350 96' i think, Its got a full flowmaster exhaust with 2 muffs, with new Flowtech Headers. I dunno if my .268 will work good with it or if i need to sell it and get a cam in the .4 range or something lol. I do kow one thig though I will from now on reseach any part that I wanna buy, so i actually know wat i am getting, and that if i could get something better for the same pirce i know wwat that is lol. ANyways any help would be great you guys

Thanks alot!!

Tyler

**68 Stepside** · 06-15-2003, 10:22 AM

If it's a comp cams 268H, here's what I can dig up on it. Hydraulic-Good street performance with stock converter, choppy idle. 1500-5500 RPM range, 286 advertised duration, 218 duration @ .050 110 degree lobe seperation, .454/.454 lift.

Should be a good all around cam, I think you'll like it.

78' Silverado · 06-15-2003, 01:20 PM

Thx man lol. I didnt kno if itwas going to be any good or not? I had been given some bad reviews on it when i said wat i had gotten so we will see. I kno for sure if i don;t like it, that it will atleast give me that good hotrod sound haha!

**swervin ervin** · 06-15-2003, 02:09 PM

I'm not sure of what cam it is. Never heard of Pro Comp cams. If it's a Comp Cams, XE268, here is the cam card.

http://www.73-87.com/my_truck/camspec.htm

06-15-2003, 02:12 AM	#1
78' Silverado \/ My Loves \/ Join Date: Mar 2003 Location: Midland,Texas Posts: 462	Need help with my new cam Ok, well i went to go look at cams today and ordered on lol. Its a Pro Comp .268 Cam. I have talked with alot of people and they say its to low, the guy who i talked with said it would be great cuz i am a daily driver but love to race alot. I dunno.....Some people said i need to get a cam in the .4 range atleast lol. My engine is a 4 Barrell Goodwrench 350 96' i think, Its got a full flowmaster exhaust with 2 muffs, with new Flowtech Headers. I dunno if my .268 will work good with it or if i need to sell it and get a cam in the .4 range or something lol. I do kow one thig though I will from now on reseach any part that I wanna buy, so i actually know wat i am getting, and that if i could get something better for the same pirce i know wwat that is lol. ANyways any help would be great you guys Thanks alot!! Tyler __________________ 78' Silverado - Blue - (In a Coma) 04' Silverado -Red- 383 Stroker in progress for the 78'!!!

06-15-2003, 10:22 AM	#2
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	If it's a comp cams 268H, here's what I can dig up on it. Hydraulic-Good street performance with stock converter, choppy idle. 1500-5500 RPM range, 286 advertised duration, 218 duration @ .050 110 degree lobe seperation, .454/.454 lift. Should be a good all around cam, I think you'll like it. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

06-15-2003, 01:20 PM	#3
78' Silverado \/ My Loves \/ Join Date: Mar 2003 Location: Midland,Texas Posts: 462	Thx man lol. I didnt kno if itwas going to be any good or not? I had been given some bad reviews on it when i said wat i had gotten so we will see. I kno for sure if i don;t like it, that it will atleast give me that good hotrod sound haha! __________________ 78' Silverado - Blue - (In a Coma) 04' Silverado -Red- 383 Stroker in progress for the 78'!!!

06-15-2003, 02:09 PM	#4
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	I'm not sure of what cam it is. Never heard of Pro Comp cams. If it's a Comp Cams, XE268, here is the cam card. http://www.73-87.com/my_truck/camspec.htm __________________ Mike 1985 Chevy C-10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.