![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2010
Location: MASS
Posts: 178
|
I need some advice
Who ever owned my truck before me destoryed the wiring. everything is spliced together or spliced to nothing puled 13-14 wires that were attached to nothing.
I plan on rewiring the whole truck. So i need advice on what to leave alone and not screw with |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2010
Location: Gainesville, MO
Posts: 251
|
Re: I need some advice
Hey buddy, I am in the same boat as you.Basically, if you can follow the wire and know that it does not pertain to what you need or want, then strip its hot and ground to free up some space. I cleaned out quite a bit of my wiring, but I still do not know what everything goes to as far as my knowledge goes. Start with a wiring diagram. If you cannot find one online LMC truck and some other classic truck parts dealers have books on them. I will say that, anything going to a relay I would thoroughly check before removal.
|
![]() |
![]() |
![]() |
#3 |
454 MAKES IT ROAR
Join Date: Jan 2008
Location: Essex, U.K
Posts: 2,701
|
Re: I need some advice
Have a look at this thread, lots of info and links to wiring diagrams in post #7 that you can save to your PC.
http://67-72chevytrucks.com/vboard/s...d.php?t=427442
__________________
Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2010
Location: MASS
Posts: 178
|
Re: I need some advice
Easy wire sells a kit $150 it comes with everything from the fuse box out.
I think i may go that route |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2010
Location: MASS
Posts: 178
|
Re: I need some advice
Also i have one orange wire that goes through the drive side of the fire wall and it plugs into the top of the fuse box but its not nor was it connected to anything what does this go to secondly there are two wires one white one orange that run all the bottom of the floor on the drivers side then go un towars the roof would these go to the dome light?
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2010
Location: Frisco,Texas
Posts: 32
|
Re: I need some advice
I have the same problem. I posted a while back asking about Painless wiring harnesses and almost everyone said to go with American Autowire if you can afford the price. Here is the thread http://67-72chevytrucks.com/vboard/s...inless+harness
I looked at their instructions/diagrams and they are incredibly detailed. Good luck James
__________________
1972 c-10 swb topless bagger project 2007 Acura MDX Tech (my daily driver) Build thread http://67-72chevytrucks.com/vboard/s...18#post4230818 |
![]() |
![]() |
![]() |
#7 | |
Cruzin
Join Date: Dec 2009
Location: on the road
Posts: 2,835
|
Re: I need some advice
Quote:
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14
|
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Sep 2010
Location: Gainesville, MO
Posts: 251
|
Re: I need some advice
Well usually orange and white wires are associated with some kind of light. Dash light, dome, interior so on.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2010
Location: MASS
Posts: 178
|
Re: I need some advice
Thanks guys!
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2010
Location: Springfield, Oregon
Posts: 164
|
Re: I need some advice
I cant find them? is easy wire the company?
__________________
-1969 C/10 Short Step soon to be Brand NEW Ls6/T56 ![]() -03 Mazda Protege 5 -WTB 1970 Chevelle project |
![]() |
![]() |
![]() |
#11 |
Gone to greener pastures
![]() Join Date: May 2007
Location: Gateway to the Delta
Posts: 7,354
|
Re: I need some advice
I think it's actually E Z Wiring.
__________________
'69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Aug 2010
Location: Springfield, Oregon
Posts: 164
|
Re: I need some advice
__________________
-1969 C/10 Short Step soon to be Brand NEW Ls6/T56 ![]() -03 Mazda Protege 5 -WTB 1970 Chevelle project |
![]() |
![]() |
![]() |
#13 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: I need some advice
We sell M&H Wiring. It is all factory color coded, has all factory ends, and exactly as the originals are right down to the gotters and clips. Not the cheapest way to go, but the best in my opinion. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#14 |
U.S. Army Green Beret Sniper
![]() Join Date: Dec 2009
Location: Enterprise Alabama
Posts: 57
|
Re: I need some advice
From past experience I would just butt splice and stow away the wires that are not needed. That way when or if you ever need wiring again it will already be routed and placed correctly. That is what my son and I have done to his..........Later
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: May 2009
Location: Orlando FL
Posts: 107
|
Re: I need some advice
If you have the money painless wireing harness are great.
there about $350 for a 12 Circuit Harness and very easy to install |
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Jan 2005
Location: Ontario, Kali
Posts: 2,427
|
Re: I need some advice
I got the M and H wiring harness for my engine compartment and under dash. Fit perfectly no messing around had the harnesses replaced and plugged in, in an afternoon.
Dano
__________________
![]() ![]() It ain't yours, if you didn't build it! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|