|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
10-30-2010, 05:41 PM
|
#24 | |
|
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,126
|
Re: Blazer Body Mount Bolt Measurements
Quote:
The front floor mount bolts were not welded in mine. Just the bed floor bolts. I think the dremel would be the best bet, or a die grinder with a pointed bit. Or just put the impact wrench on and break 'em loose.  FYI, On my kit for poly mounts, they assumed the front mount bolts were 1/2" but they are actually 9/16" and I had to use different washers than were included in the kit.
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71  Long Fleet C/10 72  Jimmy 4x4 (Junkyard Jimmy)HG's Plow Truck '78  K35 DuallyBigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-30-2010 at 05:42 PM. |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode