mono leaf drop springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64GMCHorsepower · 11-04-2010, 12:55 PM

I have a 64 gmc, with rear leafs...

who has used the mono leaf drop springs, and are you happy with them?

I have taken a few leafs out of my setup to lower it, but it likes to bounce all over the place now....so looking to do something different...

cdowns · 11-04-2010, 01:54 PM

i used monoleaf drop springs on all 4corners on a 60Ford f100 short stepper that i built and was very happy with the drop as well as the ride quality not at all soft and spongy not as stiff as a true hardcore worktruck but still handeled a heavy load good. plus the front was good with the 460ci motor

11-04-2010, 12:55 PM	#1
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	mono leaf drop springs I have a 64 gmc, with rear leafs... who has used the mono leaf drop springs, and are you happy with them? I have taken a few leafs out of my setup to lower it, but it likes to bounce all over the place now....so looking to do something different... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

11-04-2010, 01:54 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: mono leaf drop springs i used monoleaf drop springs on all 4corners on a 60Ford f100 short stepper that i built and was very happy with the drop as well as the ride quality not at all soft and spongy not as stiff as a true hardcore worktruck but still handeled a heavy load good. plus the front was good with the 460ci motor __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.