Shifter correction kit for 77 c10 with 700r4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

F-85 · 11-01-2010, 08:50 AM

What do you guys use? Its a column shift truck.

donut · 11-01-2010, 10:11 AM

Not sure what your looking for exactly

My tbh 350, I just adjust the linkage.

Course I'm not to savvy with the 700r4, maybe I'll learn too.

HOGDADDY · 11-01-2010, 05:58 PM

This one is for Eddy carbs
http://www.summitracing.com/parts/SUM-700203/

and this for Holley's

http://www.summitracing.com/parts/SUM-700202/

and I use one of these along with a G.M. 87 throttle cable for 700r4 trans. works perfect but I did add some xtra holes in bracket to get it closer to carb. for trans. cable. It was probably un-necessary I don't remember.
http://www.summitracing.com/parts/EDL-8036/

1BadSS · 11-01-2010, 07:20 PM

http://www.classicperform.com/NewProducts/Misc/Misc.htm

CPTSL linkage kit from CPP. Installed one on an 86swb and it works nicely!

F-85 · 11-02-2010, 10:38 PM

Well to make the column shifter shift smoothly. And also an indicator showing all the gears. I looked at shiftworks and they sell an adjustable bracket to help fine tune the locations. But no indicator for the pickup trucks.

Jonboy · 11-02-2010, 10:42 PM

I used the shift indicator out of a later model truck, it is held to the cluster with two screws. You can loosen the bolt at the bottom of the shift linkage to adjust it. I didn't really worry too terribly much about it, as I rarely ever needed to hold first gear.

F-85 · 11-03-2010, 11:40 AM

Quote:

Originally Posted by Jonboy

I used the shift indicator out of a later model truck, it is held to the cluster with two screws. You can loosen the bolt at the bottom of the shift linkage to adjust it. I didn't really worry too terribly much about it, as I rarely ever needed to hold first gear.

Cool thanks.

F-85 · 11-04-2010, 02:37 PM

Quote:

Originally Posted by Jonboy

I used the shift indicator out of a later model truck, it is held to the cluster with two screws. You can loosen the bolt at the bottom of the shift linkage to adjust it. I didn't really worry too terribly much about it, as I rarely ever needed to hold first gear.

What year did you use? I see classic parts has them. But sells an 83-84 and a 85-87.

piecesparts · 11-04-2010, 02:47 PM

On my 84, I just changed out the plastic indicator and made an adjustment of the lever to the linkage and away we went. worked fine, until I got tired of the column shifter and went to a floor shifter. That way I could not hit reverse at 60 MPH.

11-01-2010, 08:50 AM	#1
F-85 Registered User Join Date: Jul 2010 Location: Paw Paw,il Posts: 389	Shifter correction kit for 77 c10 with 700r4 What do you guys use? Its a column shift truck.

11-01-2010, 10:11 AM	#2
donut Registered User Join Date: Aug 2009 Location: S.C. Posts: 1,593	Re: Shifter correction kit for 77 c10 with 700r4 Not sure what your looking for exactly My tbh 350, I just adjust the linkage. Course I'm not to savvy with the 700r4, maybe I'll learn too. __________________ '86 C-30 dually, 454/tbh400 '73 K-20 350/350/205 (sold ) I'm kinda like duct tape- no real purpose, but handy to have around.

11-01-2010, 05:58 PM	#3
HOGDADDY Registered User Join Date: Jul 2006 Location: Alabama Posts: 661	Re: Shifter correction kit for 77 c10 with 700r4 This one is for Eddy carbs http://www.summitracing.com/parts/SUM-700203/ and this for Holley's http://www.summitracing.com/parts/SUM-700202/ and I use one of these along with a G.M. 87 throttle cable for 700r4 trans. works perfect but I did add some xtra holes in bracket to get it closer to carb. for trans. cable. It was probably un-necessary I don't remember. http://www.summitracing.com/parts/EDL-8036/ Last edited by HOGDADDY; 11-01-2010 at 06:04 PM.

11-01-2010, 07:20 PM	#4
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: Shifter correction kit for 77 c10 with 700r4 http://www.classicperform.com/NewProducts/Misc/Misc.htm CPTSL linkage kit from CPP. Installed one on an 86swb and it works nicely! __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

11-02-2010, 10:38 PM	#5
F-85 Registered User Join Date: Jul 2010 Location: Paw Paw,il Posts: 389	Re: Shifter correction kit for 77 c10 with 700r4 Well to make the column shifter shift smoothly. And also an indicator showing all the gears. I looked at shiftworks and they sell an adjustable bracket to help fine tune the locations. But no indicator for the pickup trucks.

11-02-2010, 10:42 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Shifter correction kit for 77 c10 with 700r4 I used the shift indicator out of a later model truck, it is held to the cluster with two screws. You can loosen the bolt at the bottom of the shift linkage to adjust it. I didn't really worry too terribly much about it, as I rarely ever needed to hold first gear. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-04-2010, 02:47 PM	#9
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Shifter correction kit for 77 c10 with 700r4 On my 84, I just changed out the plastic indicator and made an adjustment of the lever to the linkage and away we went. worked fine, until I got tired of the column shifter and went to a floor shifter. That way I could not hit reverse at 60 MPH. __________________ Frank

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.