looking for photos of your dropped trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ffk · 11-07-2010, 07:27 PM

hey im thinking about going with a 2 1/2 -4 drop or 3 1/2 -5 drop in back.on my 68

shortbed c-10.dont know if im going to run 18's or 20's..can you post some photos..im going to run stock inner fender walls.....im just looking for some ideas for next spring..thanks

eightbanger · 11-07-2010, 07:54 PM

Have a look through this thread.

http://67-72chevytrucks.com/vboard/s...lowered+bagged

breezy · 11-07-2010, 08:04 PM

3 inch belltech spindles and 96 ford taurus rear station wagon springs.
rear dropped 4.5-5 18 inch coy wheels. I'd like to go another inch but this was a quicky deal to get the truck rolling lower.

dmwphoto · 11-07-2010, 08:20 PM

before

after an Early Classic enterprises 3 1/2 - 4 drop (2 1/2 drop spindles, 1" drop coil and shocks up front, 4" drop coil in rear with shocks, super trak bar and shock relocators. Actual drop in rear ended up being 5".

72BlckButy · 11-07-2010, 08:38 PM

You only asked for 2.5/4 and 3.5/5, but you might as well check out all your options...

4.5/6" ECE Drop, 6-lug disc brake upgrade, 20x8.5 and 20x10 SL Vintecs

Name: 105_0041.jpg
Views: 3425
Size: 54.7 KB

Zoomin · 11-07-2010, 11:20 PM

3.5 / 5

robzilla · 11-08-2010, 12:45 AM

Quote:

Originally Posted by Zoomin

3.5 / 5

what rim/tire sizes you running on yours? i like the stance.

68Stepbed · 11-08-2010, 09:39 AM

3.5/5 with 17's

Zoomin · 11-08-2010, 12:07 PM

Quote:

Originally Posted by robzilla

what rim/tire sizes you running on yours? i like the stance.

18's all the way around. 255/45 and 275/45 on 8's and 9.5's
Posted via Mobile Device

big_al_71 · 11-08-2010, 01:02 PM

4/6 drop ECE stuff with 18/20 combo

406 Q-ship · 11-08-2010, 01:28 PM

I am looking at a 3.5/4 or a 5" rear drop. I would like to get responce from those that dropped the rear 5", did you have to notch the frame and if not how much clearance from the top of the axle to the frame. In my measuring I come up that a 4" will give my 2 3/4" gap between the axle and the frame.

72BlckButy · 11-08-2010, 05:36 PM

Quote:

Originally Posted by 406 Q-ship

I am looking at a 3.5/4 or a 5" rear drop. I would like to get responce from those that dropped the rear 5", did you have to notch the frame and if not how much clearance from the top of the axle to the frame. In my measuring I come up that a 4" will give my 2 3/4" gap between the axle and the frame.

No notch required for a 5" or a 6" drop; unless you will be doing heavier than normal hauling/towing.

With a 6" drop I had 2" between the fram and the top of the axle to the 4" between the top of the pumpkin and the bottom of the bed; IIRC. Have only bottomed out once... and I was pushing it down the road pretty good. I'll recheck my measurements tonight.

Robertjust777 · 11-08-2010, 09:11 PM

71Tymbomb · 11-17-2010, 12:20 AM

My 71 before and after. Brothers performance package. 2" drop spindles 2" drop springs up front, out back 4" drop springs plus 2" blocks, sway bars, performance shocks, and sway bars all around.

Ole Greenie · 11-17-2010, 01:11 AM

Here are a couple of my before and after shots. I lowered it just last week. 2.5" drop spindles and 1" lowering springs with 4" rear drop springs.

11-07-2010, 07:27 PM	#1
ffk Registered User Join Date: Oct 2010 Location: lowell, in Posts: 271	looking for photos of your dropped trucks hey im thinking about going with a 2 1/2 -4 drop or 3 1/2 -5 drop in back.on my 68 shortbed c-10.dont know if im going to run 18's or 20's..can you post some photos..im going to run stock inner fender walls.....im just looking for some ideas for next spring..thanks

11-07-2010, 07:54 PM	#2
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: looking for photos of your dropped trucks Have a look through this thread. http://67-72chevytrucks.com/vboard/s...lowered+bagged __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

11-07-2010, 08:04 PM	#3
breezy Registered User Join Date: Oct 2010 Location: Palaskifield,Mo. Posts: 71	Re: looking for photos of your dropped trucks 3 inch belltech spindles and 96 ford taurus rear station wagon springs. rear dropped 4.5-5 18 inch coy wheels. I'd like to go another inch but this was a quicky deal to get the truck rolling lower. Attached Images

11-07-2010, 08:20 PM	#4
dmwphoto Registered User Join Date: Sep 2010 Location: Richmond, Va Posts: 573	Re: looking for photos of your dropped trucks before after an Early Classic enterprises 3 1/2 - 4 drop (2 1/2 drop spindles, 1" drop coil and shocks up front, 4" drop coil in rear with shocks, super trak bar and shock relocators. Actual drop in rear ended up being 5".

11-07-2010, 08:38 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: looking for photos of your dropped trucks You only asked for 2.5/4 and 3.5/5, but you might as well check out all your options... 4.5/6" ECE Drop, 6-lug disc brake upgrade, 20x8.5 and 20x10 SL Vintecs __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-07-2010, 11:20 PM	#6
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: looking for photos of your dropped trucks 3.5 / 5 Attached Images __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

11-08-2010, 09:39 AM	#8
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: looking for photos of your dropped trucks 3.5/5 with 17's __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

11-08-2010, 01:02 PM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: looking for photos of your dropped trucks 4/6 drop ECE stuff with 18/20 combo Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-08-2010, 01:28 PM	#11
406 Q-ship Registered User Join Date: Oct 2010 Location: Largo Florida Posts: 632	Re: looking for photos of your dropped trucks I am looking at a 3.5/4 or a 5" rear drop. I would like to get responce from those that dropped the rear 5", did you have to notch the frame and if not how much clearance from the top of the axle to the frame. In my measuring I come up that a 4" will give my 2 3/4" gap between the axle and the frame. __________________ Lifes journey is not to arrive at the gate well preserved, it is to slide in sideways all used up and wore out yelling.....God what'a ride! Where patience fails, force prevails Stapp's Ironical Paradox "The universal aptitude for ineptitude makes any human accomplishment an incredible miracle."

11-08-2010, 09:11 PM	#13
Robertjust777 Registered User Join Date: Oct 2009 Location: Henderson Nv Posts: 151	Re: looking for photos of your dropped trucks

11-17-2010, 12:20 AM	#14
71Tymbomb Registered User Join Date: Oct 2010 Location: Etna, Calif. Posts: 8	Re: looking for photos of your dropped trucks My 71 before and after. Brothers performance package. 2" drop spindles 2" drop springs up front, out back 4" drop springs plus 2" blocks, sway bars, performance shocks, and sway bars all around. Attached Images

11-17-2010, 01:11 AM	#15
Ole Greenie Registered User Join Date: Apr 2010 Location: Hagerstown, MD Posts: 246	Re: looking for photos of your dropped trucks Here are a couple of my before and after shots. I lowered it just last week. 2.5" drop spindles and 1" lowering springs with 4" rear drop springs. __________________ John Paap Ole Greenie Hagerstown, MD My Mistress 70 CST Short/Step LS 5.3/4L65E New motor install Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=667773

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.