|
Re: 1969 Chevy Stepside Restoration/Build up
Quote:
Originally Posted by matthew20061
The Cam is a Comp Cam 223/231 duration with .610/.617 lift on a 112 LSA it's suppose to work very good with these L92 heads and make great power!
~As for the coil packs.... that's yet to be determined any ideas? I was thinking of mounting them down in the frame rails and then building a spark plug wire set and nicely running them to each plug. But I'm not sure yet.  |
very good....I've installed that cam on a 114LSA in a ported/milled L92 headed 6.0 GTO and it made 472rwhp (6spd manual)
also in a G8 GT it made 420rwhp thru the 6spd auto and untouched heads
coils in the frame rails would probably be decent...behind the firewall with some slots to bring them thru....on the inner fenders, lots of options
__________________
71 C10 long bed, 2003 6.0L, 06GTO E40, T56, 12bolt 4.10 rear
Last edited by 71cadc10; 11-17-2010 at 02:30 PM.
|
11-17-2010, 02:29 PM
Threaded Mode