Control Arm Shaft rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokinstang70 · 11-16-2010, 05:35 PM

I have pulled my upper and lower (Stock) control arms apart for paint... I would like to replace the rubber seals on the shafts... where can I buy just the rubber seals?

Thanks

**BIG ORANGE** · 11-16-2010, 05:44 PM

Got mine at Advance,,,,,TRW

bsteele · 11-16-2010, 05:45 PM

I couldn't find just the rubber seals. I bought the whole kit and replaced it all on my tops. Got a pretty good deal at the local NAPA.

smokinstang70 · 11-16-2010, 10:43 PM

Anyone else? I'm getting desperate... I wasn't planning on $75 each for lower shafts and $51 each for the uppers... really just looking to rebuild what i have.

ideas?

Thanks

raycow · 11-17-2010, 02:11 PM

I got mine from LMC a few years ago. Look at items #7 and #27.
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=138.

Ray

**Clyde65** · 11-17-2010, 04:05 PM

What I was told was to visually inspect them real good if your going with original, just because they will stress crack. just FYI.

TobyArnot · 11-18-2010, 07:33 PM

Quote:

Originally Posted by BIG ORANGE

Got mine at Advance,,,,,TRW

Hey Big Guy - Advance has Moog, TRW, & OE (she said made by TRW?). Which one's ta get, huh?

Thanks,

Toby

11-16-2010, 05:35 PM	#1
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Control Arm Shaft rebuild I have pulled my upper and lower (Stock) control arms apart for paint... I would like to replace the rubber seals on the shafts... where can I buy just the rubber seals? Thanks

11-16-2010, 05:45 PM	#3
bsteele Registered User Join Date: Feb 2009 Location: Kershaw, South Carolina Posts: 113	Re: Control Arm Shaft rebuild I couldn't find just the rubber seals. I bought the whole kit and replaced it all on my tops. Got a pretty good deal at the local NAPA.

11-16-2010, 10:43 PM	#4
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Control Arm Shaft rebuild Anyone else? I'm getting desperate... I wasn't planning on $75 each for lower shafts and $51 each for the uppers... really just looking to rebuild what i have. ideas? Thanks

11-17-2010, 02:11 PM	#5
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Control Arm Shaft rebuild I got mine from LMC a few years ago. Look at items #7 and #27. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=138. Ray __________________ Live more responsibly. Eat lower on the food chain. Eat vegetarians.

11-17-2010, 04:05 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Control Arm Shaft rebuild What I was told was to visually inspect them real good if your going with original, just because they will stress crack. just FYI. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

11-16-2010, 05:44 PM	#2
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Control Arm Shaft rebuild Got mine at Advance,,,,,TRW __________________ Things happen for a reason!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.