NJ FS: B&M floor shifter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-12-2010, 11:20 PM

B&M floor shifter in good condition.
Please note the tabs on the chrome piece are missing, but it does screw down to shifter bracket.

Any questions please LMK.

Asking $35 plus the ride.

Thanks.
Scott

**ScottH** · 10-13-2010, 08:03 PM

ttt

**ScottH** · 10-14-2010, 03:11 PM

ttt

**phase_one** · 10-14-2010, 04:50 PM

What kind? Do you have part number? What kind of transmission did you get it off of?

**ScottH** · 10-14-2010, 11:11 PM

It's B&M but sorry no part number.
It was used with a TH350.

**72K20** · 10-15-2010, 04:25 PM

$25 shipped to 76234? If you still have the cable and other brackets I'll pay $35 shipped.

**ScottH** · 10-15-2010, 05:41 PM

Thanks for the offer but it will run $15-20 just to ship it.
What brackets are missing?

**72K20** · 10-15-2010, 09:37 PM

There is typically a bracket on the transmission end and a cable to connect the shifter with the transmission. Do you happen to have those or recall ever seeing them around maybe?

**ScottH** · 10-15-2010, 10:29 PM

I may have the cable with the bracket now that u mention it.
Will check over the weekend and let u know.

Scott

**72K20** · 10-15-2010, 11:36 PM

Thanks Scott, I am interested.

**72K20** · 10-25-2010, 09:27 AM

Still available? Find the bracket and/or cable? I am still interested and back in town.

**ScottH** · 10-25-2010, 09:56 AM

I looked this weekend where I thought I had one but no luck.
I still have a few other boxes to check, will let u know how I make out.
Sorry for the delay.

Scott

**specialtyretail** · 10-25-2010, 01:03 PM

Your shifter is a B & M Z Gate. They are really good, simple to operate shifters. They aren't ratchet style, just detent. part # 80681. I would also be interested if you find the cable and bracket if everyone else passes. Thanks, Fred.

**ScottH** · 11-15-2010, 12:24 PM

Still available, could not find the cable.
Price reduced to $25 plus the ride.

Mr.C · 11-15-2010, 10:33 PM

Still have the shifter? How much shipped to 53073?

darthwall · 11-16-2010, 03:03 AM

im interested in it next in line I have a ratchet shifter that I can retro into to body

**ScottH** · 11-16-2010, 12:02 PM

Still available.....Mr. C will get u shipping cost tonight.

Scott

**72K20** · 11-16-2010, 11:54 PM

Hey Scott, sorry I have not responded sooner. Still interested. Am I still in line or not?

**ScottH** · 11-17-2010, 11:21 AM

72K20, u were 1st to express interest and since no one has said "I'll take it" u r still 1st in line.

Scott

Mr.C · 11-17-2010, 06:59 PM

If it gets to me I will take it.

**72K20** · 11-18-2010, 10:26 AM

I will defer to Mr. C. He was the first to say he would "take it", but thank you so much for the consideration.

**ScottH** · 11-18-2010, 01:12 PM

72k20 thanks for letting me know, Mr. C pm sent.

Mr.C · 11-19-2010, 02:09 AM

PP sent

**ScottH** · 11-19-2010, 11:07 AM

Sold to Mr. C - will send tracking # as soon as its on the way.

Thanks
Scott

10-12-2010, 11:20 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	FS: B&M floor shifter B&M floor shifter in good condition. Please note the tabs on the chrome piece are missing, but it does screw down to shifter bracket. Any questions please LMK. Asking $35 plus the ride. Thanks. Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 11-17-2010 at 11:19 AM.

10-13-2010, 08:03 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2010, 03:11 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2010, 04:50 PM	#4
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: FS: B&M floor shifter What kind? Do you have part number? What kind of transmission did you get it off of? __________________ 11 Surbaban 70 C 10 still in progress

10-14-2010, 11:11 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter It's B&M but sorry no part number. It was used with a TH350. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-15-2010, 04:25 PM	#6
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: B&M floor shifter $25 shipped to 76234? If you still have the cable and other brackets I'll pay $35 shipped. Last edited by 72K20; 10-15-2010 at 04:26 PM. Reason: added comment

10-15-2010, 05:41 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter Thanks for the offer but it will run $15-20 just to ship it. What brackets are missing? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-15-2010, 09:37 PM	#8
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: B&M floor shifter There is typically a bracket on the transmission end and a cable to connect the shifter with the transmission. Do you happen to have those or recall ever seeing them around maybe?

10-15-2010, 10:29 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter I may have the cable with the bracket now that u mention it. Will check over the weekend and let u know. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-15-2010, 11:36 PM	#10
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: B&M floor shifter Thanks Scott, I am interested.

10-25-2010, 09:27 AM	#11
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: B&M floor shifter Still available? Find the bracket and/or cable? I am still interested and back in town.

10-25-2010, 09:56 AM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter I looked this weekend where I thought I had one but no luck. I still have a few other boxes to check, will let u know how I make out. Sorry for the delay. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-25-2010, 01:03 PM	#13
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: FS: B&M floor shifter Your shifter is a B & M Z Gate. They are really good, simple to operate shifters. They aren't ratchet style, just detent. part # 80681. I would also be interested if you find the cable and bracket if everyone else passes. Thanks, Fred.

11-15-2010, 12:24 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter Still available, could not find the cable. Price reduced to $25 plus the ride. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-15-2010, 10:33 PM	#15
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: FS: B&M floor shifter Still have the shifter? How much shipped to 53073?



Register or Log In To remove these advertisements.

11-16-2010, 03:03 AM	#16
darthwall Registered User Join Date: Mar 2010 Location: washington Posts: 274	Re: FS: B&M floor shifter im interested in it next in line I have a ratchet shifter that I can retro into to body

11-16-2010, 12:02 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter Still available.....Mr. C will get u shipping cost tonight. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-16-2010, 11:54 PM	#18
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: B&M floor shifter Hey Scott, sorry I have not responded sooner. Still interested. Am I still in line or not?

11-17-2010, 11:21 AM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter 72K20, u were 1st to express interest and since no one has said "I'll take it" u r still 1st in line. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-17-2010, 06:59 PM	#20
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: FS: B&M floor shifter If it gets to me I will take it.

11-18-2010, 10:26 AM	#21
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: FS: B&M floor shifter I will defer to Mr. C. He was the first to say he would "take it", but thank you so much for the consideration.

11-18-2010, 01:12 PM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter 72k20 thanks for letting me know, Mr. C pm sent. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-19-2010, 02:09 AM	#23
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: FS: B&M floor shifter PP sent

11-19-2010, 11:07 AM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: B&M floor shifter Sold to Mr. C - will send tracking # as soon as its on the way. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.