67 chevy c10 craigslist - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70' GMC · 11-19-2010, 01:01 PM

http://savannah.craigslist.org/cto/2061255101.html

The guy will sell it to me for 2600 bucks, should I get it?
Posted via Mobile Device

screamin_c10 · 11-19-2010, 01:12 PM

I have found that that the definition of "some rust" differs greatly depending on which end of the deal you are on... I would look the truck over real well and run a cloth covered magnet over the typical trouble spots looking for filler under that pretty new paint.

I still think that is a bit high though. I gave far less for my 67 C20 with a 327/ TH400 A/C, P/S, flip forward seat, overload springs, etc.

cam.man67 · 11-19-2010, 01:13 PM

Doesn't look too bad at all. I'd say, unless there's some major issue with it he's not telling about, you should def. go for it.

*ksjh1316* · 11-19-2010, 04:41 PM

It all depends on the rust as body work is way more costly than engine work. You have to ask yourself what your plans are and how much money you are going to throw at it. Do you really want a/c v-8 auto ect. Are those items in good enought repair in your GMC to do a swap. Take a good look at the truck take a lot of pics and post them up that shot on craigslist is a poor pic

70' GMC · 11-19-2010, 04:46 PM

I told him more pics, but he hasn't, also are any of y'all around savannah hinesville area in georgia?
Posted via Mobile Device

*ksjh1316* · 11-19-2010, 05:05 PM

Travis also check EBAY there are a few GMC's on there that look to be close to you that look to be good deals

raycow · 11-20-2010, 04:53 AM

Body condition is everything on these trucks. It COULD be worth $2600 if it passes the rust test. However, there is no way I would settle on a price without personally inspecting it first.

Ray

70' GMC · 11-20-2010, 02:47 PM

Quote:

Originally Posted by ksjh1316

Travis also check EBAY there are a few GMC's on there that look to be close to you that look to be good deals

Link?
Posted via Mobile Device

**special-K** · 11-20-2010, 03:34 PM

Not enough info in that ad to judge.Do you want a 6 cyl/3spd?

11-19-2010, 01:01 PM	#1
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	67 chevy c10 craigslist http://savannah.craigslist.org/cto/2061255101.html The guy will sell it to me for 2600 bucks, should I get it? Posted via Mobile Device __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-19-2010, 01:12 PM	#2
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: 67 chevy c10 craigslist I have found that that the definition of "some rust" differs greatly depending on which end of the deal you are on... I would look the truck over real well and run a cloth covered magnet over the typical trouble spots looking for filler under that pretty new paint. I still think that is a bit high though. I gave far less for my 67 C20 with a 327/ TH400 A/C, P/S, flip forward seat, overload springs, etc. __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! Last edited by screamin_c10; 11-19-2010 at 01:13 PM.

11-19-2010, 01:13 PM	#3
cam.man67 Registered User Join Date: Jun 2010 Location: Jefferson, MD Posts: 2,397	Re: 67 chevy c10 craigslist Doesn't look too bad at all. I'd say, unless there's some major issue with it he's not telling about, you should def. go for it. __________________ '68 Dodge Dart 270, 225, 904, 2.76--"Lucy" 1996 Gmc 1500 Z71, 350, 4l60e, 3.73s 1995 Jeep Wrangler Rio Grande 2.5, AX5, 4.10s 1989 Toyota Pickup 22re, auto, 3.73

11-19-2010, 04:41 PM	#4
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 67 chevy c10 craigslist It all depends on the rust as body work is way more costly than engine work. You have to ask yourself what your plans are and how much money you are going to throw at it. Do you really want a/c v-8 auto ect. Are those items in good enought repair in your GMC to do a swap. Take a good look at the truck take a lot of pics and post them up that shot on craigslist is a poor pic

11-19-2010, 04:46 PM	#5
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: 67 chevy c10 craigslist I told him more pics, but he hasn't, also are any of y'all around savannah hinesville area in georgia? Posted via Mobile Device __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-19-2010, 05:05 PM	#6
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: 67 chevy c10 craigslist Travis also check EBAY there are a few GMC's on there that look to be close to you that look to be good deals

11-20-2010, 04:53 AM	#7
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: 67 chevy c10 craigslist Body condition is everything on these trucks. It COULD be worth $2600 if it passes the rust test. However, there is no way I would settle on a price without personally inspecting it first. Ray __________________ Live more responsibly. Eat lower on the food chain. Eat vegetarians.

11-20-2010, 03:34 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 chevy c10 craigslist Not enough info in that ad to judge.Do you want a 6 cyl/3spd? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.