|
05-27-2012, 10:30 PM | #1 |
Registered User
Join Date: Mar 2012
Location: Seaside, OR
Posts: 6
|
Re: front end not right!
I too am having the same issues exactly, for the exact same reason, except mine has a new driver fender only and new (used) out grille. Everything lined up perfectly before they disassembled it. Will post pics, but they look exactly like yours. my bumper is also the same.
|
05-27-2012, 10:40 PM | #2 |
Registered User
Join Date: Dec 2008
Location: coffeyville, Kansas
Posts: 195
|
Re: front end not right!
? is the headlight bezel installed right ? you may need to flip it 180 degrees
|
05-27-2012, 10:48 PM | #3 |
Registered User
Join Date: Mar 2012
Location: Seaside, OR
Posts: 6
|
Re: front end not right!
Yes, I made sure the screw indents are at 9 and 12 o'clock.
|
05-27-2012, 10:52 PM | #4 |
Registered User
Join Date: Mar 2012
Location: Seaside, OR
Posts: 6
|
Re: front end not right!
I did also notice that they tightened the passenger side core support bolt tighter than the drivers side. I back it off to match the amount of threads on the core support mount bolts on the drivers side, but it didn't seem to do much.
|
05-28-2012, 08:34 AM | #5 |
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,446
|
Re: front end not right!
Must be alighnment somewhere in the support area mine is the same only on pass. side .I only put on a aftermarket bumper all else is original I have had my headlight out a 1000 x my gap is not as bad as yours but still off a little
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
05-28-2012, 08:40 AM | #6 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,459
|
Re: front end not right!
Rather than loosening the bolts to compensate for the lean why not use some thick washers or the correct body bolt shims to even it out?
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|