NJ 4L80E 2WD w/converter, $600 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 11-08-2010, 12:00 PM

advertising here in 73-87 as an upgrade cuz it's rarely somebody that already has one needs it. was a GM NEW crate tranny and at 25K miles on it the van got rolled over. total loss. I wanted the engine so took the whole works. Pick up here only . I kept it with numerous thoughts in mind , but cleaning up anything i don't absolutely need. I know almost no one on this forum lives near me at 08070 , but it's a shot. Has stock converter and fluid was pink.I'll even WELD a drain into the pan for you if wanted.

Crossy 856-693-0918 9am-9pm EST only.

dbcrossy@verizon.net

SCOTI · 11-09-2010, 09:23 AM

Good deal. Hopefully the right guy will be close by.

Big Port Jimmy 6 · 11-10-2010, 09:39 PM

Is it an early or a ls bell housing?

LILREDGMC · 11-10-2010, 11:09 PM

Crossy:

Put me in line for your trans. Can you get me overall length ( thinking of putting in my Longhorn that had a 400 ) so I could cruise in style and use the 4.10 or 3.73 in lieu of the stock 3.55.

We had previously touched on some parts I had that you might have had an interest in, but now they escape me, 241 transfer and 700, Suburban stuff from an 89, or ? Anything you might consider as partial trade?

We'll have to figure out the transport issue.

Thanks

LILREDGMC

**crossy** · 11-11-2010, 07:07 AM

big port- early it was behind 95 TBI engine. thanx, crossy

LRG, i'll have to measure, no parts trade i remember.

LILREDGMC · 11-29-2010, 10:03 AM

Crossy:

Did you get a measure yet? I went to a 3 day job, became a 10 day job, then Thanksgiving out of town, so I expected a 'where the heck yo at" when I came back on site. Let me know the dimensions.

LRG

**crossy** · 11-29-2010, 06:09 PM

LRG, 32" overall measuring down the top at an angle,exactly the same as my spare 700R4. the mount is all the way at the back though.

11-08-2010, 12:00 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	4L80E 2WD w/converter, $600 advertising here in 73-87 as an upgrade cuz it's rarely somebody that already has one needs it. was a GM NEW crate tranny and at 25K miles on it the van got rolled over. total loss. I wanted the engine so took the whole works. Pick up here only . I kept it with numerous thoughts in mind , but cleaning up anything i don't absolutely need. I know almost no one on this forum lives near me at 08070 , but it's a shot. Has stock converter and fluid was pink.I'll even WELD a drain into the pan for you if wanted. Crossy 856-693-0918 9am-9pm EST only. dbcrossy@verizon.net __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

11-09-2010, 09:23 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,943	Re: 4L80E 2WD w/converter, $600 Good deal. Hopefully the right guy will be close by. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-10-2010, 09:39 PM	#3
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: 4L80E 2WD w/converter, $600 Is it an early or a ls bell housing? __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.

11-10-2010, 11:09 PM	#4
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Re: 4L80E 2WD w/converter, $600 Crossy: Put me in line for your trans. Can you get me overall length ( thinking of putting in my Longhorn that had a 400 ) so I could cruise in style and use the 4.10 or 3.73 in lieu of the stock 3.55. We had previously touched on some parts I had that you might have had an interest in, but now they escape me, 241 transfer and 700, Suburban stuff from an 89, or ? Anything you might consider as partial trade? We'll have to figure out the transport issue. Thanks LILREDGMC

11-11-2010, 07:07 AM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 4L80E 2WD w/converter, $600 big port- early it was behind 95 TBI engine. thanx, crossy LRG, i'll have to measure, no parts trade i remember. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

11-29-2010, 10:03 AM	#6
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Re: 4L80E 2WD w/converter, $600 Crossy: Did you get a measure yet? I went to a 3 day job, became a 10 day job, then Thanksgiving out of town, so I expected a 'where the heck yo at" when I came back on site. Let me know the dimensions. LRG

11-29-2010, 06:09 PM	#7
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 4L80E 2WD w/converter, $600 LRG, 32" overall measuring down the top at an angle,exactly the same as my spare 700R4. the mount is all the way at the back though. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.