What patch panel is this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xludan · 12-20-2010, 10:17 PM

I was working on replacing the front cab supports tonight and it turns out the section of the rocker that the support bolts on to is rusted as well. Does anyone know what patch panel this is? Is it #7 in the lmc catalog link below? I've circled the section in red in the diagram below that I am talking about. Thanks for the help.

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=22

**Dieselwrencher** · 12-20-2010, 11:00 PM

I believe that is the floor extension. It is #7 in the LMC link.

kevmcrae · 12-21-2010, 02:14 AM

Dieselwrencher is right. Outer cab floor extenstion #7 on same page in LMC.

That's the inner rocker in your picture. It comes as part of the outer floor patch. I just replaced both sides on mine last month. I bought "Outer floor inner rocker" patch from Rez Engineering for $55. Good time to replace your outer rockers too for only another $20! I was very happy with the quality of sheet metal I got from him. Was heavier than some of those I've got from LMC. Rez is 406-727-9267

ebfabman · 12-21-2010, 07:56 AM

And front cab support. oops guess you already knew that, sorry.

12-20-2010, 10:17 PM	#1
xludan Registered User Join Date: Jan 2010 Location: Minneapolis MN Posts: 202	What patch panel is this? I was working on replacing the front cab supports tonight and it turns out the section of the rocker that the support bolts on to is rusted as well. Does anyone know what patch panel this is? Is it #7 in the lmc catalog link below? I've circled the section in red in the diagram below that I am talking about. Thanks for the help. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=22 __________________ 1971 C10 Cheyenne Super Build Thread Here: http://67-72chevytrucks.com/vboard/s...d.php?t=411867

12-20-2010, 11:00 PM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: What patch panel is this? I believe that is the floor extension. It is #7 in the LMC link. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-21-2010, 02:14 AM	#3
kevmcrae Registered User Join Date: Sep 2010 Location: Kalispell Montana Posts: 92	Re: What patch panel is this? Dieselwrencher is right. Outer cab floor extenstion #7 on same page in LMC. That's the inner rocker in your picture. It comes as part of the outer floor patch. I just replaced both sides on mine last month. I bought "Outer floor inner rocker" patch from Rez Engineering for $55. Good time to replace your outer rockers too for only another $20! I was very happy with the quality of sheet metal I got from him. Was heavier than some of those I've got from LMC. Rez is 406-727-9267 Last edited by kevmcrae; 12-21-2010 at 02:21 AM.

12-21-2010, 07:56 AM	#4
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: What patch panel is this? And front cab support. oops guess you already knew that, sorry. Last edited by ebfabman; 12-21-2010 at 07:58 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.