KS 72 gmc sierra now getting parted - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roughedup72 · 12-28-2010, 09:45 PM

Randy, How much for the cargo light shipped to 29212 and will it come with the rubber isolated nuts that holds it to the cab? Thanks

gcburdic · 12-28-2010, 09:46 PM

Randy...I'm gonna pass on the tilt....check your PM from me....Thanks Geoff

teeitup · 12-28-2010, 10:10 PM

rawraw, I'll check them out

2000tj, Scott, I'll get front bumper shipping price, yoru 2nd in line on rear

gsd66nova, Shane, I'll get a quote Wed

crig39, Carl, $90 shipped for set

bguild, thats for entire cab and windows and gas tank, everything else out of it. It has had new corners and rockers put on it. The mounts they put the slip ons over them. Not sure on floorboards, I haven't pulled the mat up yet. I don't mess with deposits, they only way I hold things is if they are paid for sorry

roughedup72, $30 shipped for it complete. I'll try to get rubber nuts off most the time they break off

gcburdic, Geoff, no problem

Thanks Randy

hwes55 · 12-28-2010, 10:20 PM

Hey Randy. I will take those radiator mounts.
Posted via Mobile Device

gsd66nova · 12-28-2010, 10:33 PM

Randy if you would like to put that battery tray and those defrost vents from the 72 cheyenne with that bumper I will take those also. Thanks, Shane.

bguild · 12-28-2010, 10:38 PM

Randy most likely I will take it but could you take some pics and pull the mat as well. I don't mind fixing some things but if I go the trouble of replacing the cab on mine I want to make sure I have something better than I already have.
I also understand on the deposit issue. Also how long can you hold it if I pay you
Posted via Mobile Device

teeitup · 12-28-2010, 10:53 PM

hwes55, pm'd you info

gsd66nova, I'll have to box those items in a separate box. I'm not having any luck with steering wheel from cheyenne thread, so I'll probably have to try to heat it Thurs after work

bguild, I know this cab has some cowl rust on driver side, I'll get pics of lower parts Wed after work. I would of checked it out better, I was thinking you just wanted to make sure upper half was good, sorry

Thanks Randy

bguild · 12-28-2010, 10:59 PM

No problem Randy I originally asked about the upper half but the more I think about it. It might be nice just use the entire cab and paint it then move the parts over. Just let me know. There is no rush. Would it be cheaper if I don't take the glass? I don't really care for the upper front tint. Thanks for the help and again I will probably take it picture pending.
Posted via Mobile Device

gsd66nova · 12-28-2010, 10:59 PM

Just let me know if it ever comes off, I'm not having any luck finding one anywhere else. Thanks, Shane.

chipflyer · 12-28-2010, 11:04 PM

Interested in the windshield with trim if its a nice one and you decide to separate it from the cab Randy and better put me in line for those exterior mirrors.

Jeff

bguild · 12-28-2010, 11:08 PM

Quote:

Originally Posted by chipflyer

Interested in the windshield with trim if its a nice one and you decide to separate it from the cab Randy and better put me in line for those exterior mirrors.

Jeff

Randy just sell the glass to jeff and hopefully that cheapens up my end (-: I think I just want a solid clear glass
Posted via Mobile Device

teeitup · 12-28-2010, 11:10 PM

Bguild, I get $75 for windshields, so $75 for cab.

Shane, I'll try my best

Hey Jeff, If he passes on windshield its up to you. Also I'll give other guy till tommorrow to let me know on mirrors. Might have a deal for you if you want to work on the eagle, do some trading?

Thanks Randy

chipflyer · 12-28-2010, 11:14 PM

We can probably work something out

I may run by tomorrow after work, you going to be around?

Jeff

bguild · 12-28-2010, 11:24 PM

Randy 75 works I will take it pending pics. I need to get some money in my paypal anyway. I am 100% in as of now. Thanks.
Posted via Mobile Device

teeitup · 12-29-2010, 12:27 AM

Jeff, only here till 5:00, pool night, but I'll be around Thurs evening

Bguild, I'll get pics. I can store it for awhile no problem, I've got other cabs, beds, rearends, bumpers and alot of other stuff sold thats stored around here

Thanks Randy

redmonster · 12-29-2010, 01:41 AM

Randy will take the wiper switch pm me your address
Posted via Mobile Device

j.kirn · 12-29-2010, 08:44 AM

Is there any differences in the trailering arms from 1/2 to 3/4 ton?

teeitup · 12-29-2010, 09:27 AM

redmonster, I'll pm you

j.kim, some 3/4 ton had a extra plate on bottom is all, not all had them.

Thanks Randy

Leroy-B1 · 12-29-2010, 10:12 AM

do you have any 5 lug steel wheels that a dog dish hubcap will fit on?

mdaven@aol.com · 12-29-2010, 12:29 PM

Randy, Still need a column shifter and an ashtray bracket (I have the ashtray). Might be interested in the tilt column if still available. Thanks, Marvin

409impala1 · 12-29-2010, 01:27 PM

finally get a windshield and trim, after I gave up, figures, however, still have not got a new one yet.

teeitup · 12-29-2010, 01:52 PM

Leroy-B1. yes I have some I'll get some pics later today, I get $20 a wheel plus shipping

Marvin, no shifter right now. What year ash tray bracket you needing for? Tilt is still available

Mark, sorry I figured yuo already got one

Thanks Randy

vette442 · 12-29-2010, 03:49 PM

I can't tell from the pics if it has shoulder belts. If it has them - and you'd sell them - I'd be interested in the two mounting bolts that are shoulder height behind each door. Zip is 15317. Thanks.

mdaven@aol.com · 12-29-2010, 03:58 PM

Randy, My truck is 1970 C10. How much for the tilt shipped and does it include the shifter? Thanks, Marvin

jce4isu · 12-29-2010, 04:16 PM

Quote:

Originally Posted by teeitup

klko

how much for the head liner

12-28-2010, 09:45 PM	#51
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: 72 gmc sierra now getting parted Randy, How much for the cargo light shipped to 29212 and will it come with the rubber isolated nuts that holds it to the cab? Thanks __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

12-28-2010, 09:46 PM	#52
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,299	Re: 72 gmc sierra now getting parted Randy...I'm gonna pass on the tilt....check your PM from me....Thanks Geoff __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

12-28-2010, 10:10 PM	#53
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 gmc sierra now getting parted rawraw, I'll check them out 2000tj, Scott, I'll get front bumper shipping price, yoru 2nd in line on rear gsd66nova, Shane, I'll get a quote Wed crig39, Carl, $90 shipped for set bguild, thats for entire cab and windows and gas tank, everything else out of it. It has had new corners and rockers put on it. The mounts they put the slip ons over them. Not sure on floorboards, I haven't pulled the mat up yet. I don't mess with deposits, they only way I hold things is if they are paid for sorry roughedup72, $30 shipped for it complete. I'll try to get rubber nuts off most the time they break off gcburdic, Geoff, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2010, 10:20 PM	#54
hwes55 Say hello to my little friend! Join Date: Apr 2010 Location: New Hill, NC Posts: 30	Re: 72 gmc sierra now getting parted Hey Randy. I will take those radiator mounts. Posted via Mobile Device

12-28-2010, 10:33 PM	#55
gsd66nova Registered User Join Date: Dec 2010 Location: Milton TN. Posts: 108	Re: 72 gmc sierra now getting parted Randy if you would like to put that battery tray and those defrost vents from the 72 cheyenne with that bumper I will take those also. Thanks, Shane.

12-28-2010, 10:38 PM	#56
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: 72 gmc sierra now getting parted Randy most likely I will take it but could you take some pics and pull the mat as well. I don't mind fixing some things but if I go the trouble of replacing the cab on mine I want to make sure I have something better than I already have. I also understand on the deposit issue. Also how long can you hold it if I pay you Posted via Mobile Device __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

12-28-2010, 10:53 PM	#57
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 gmc sierra now getting parted hwes55, pm'd you info gsd66nova, I'll have to box those items in a separate box. I'm not having any luck with steering wheel from cheyenne thread, so I'll probably have to try to heat it Thurs after work bguild, I know this cab has some cowl rust on driver side, I'll get pics of lower parts Wed after work. I would of checked it out better, I was thinking you just wanted to make sure upper half was good, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2010, 10:59 PM	#58
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: 72 gmc sierra now getting parted No problem Randy I originally asked about the upper half but the more I think about it. It might be nice just use the entire cab and paint it then move the parts over. Just let me know. There is no rush. Would it be cheaper if I don't take the glass? I don't really care for the upper front tint. Thanks for the help and again I will probably take it picture pending. Posted via Mobile Device __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

12-28-2010, 11:04 PM	#60
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 72 gmc sierra now getting parted Interested in the windshield with trim if its a nice one and you decide to separate it from the cab Randy and better put me in line for those exterior mirrors. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-28-2010, 11:10 PM	#62
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 gmc sierra now getting parted Bguild, I get $75 for windshields, so $75 for cab. Shane, I'll try my best Hey Jeff, If he passes on windshield its up to you. Also I'll give other guy till tommorrow to let me know on mirrors. Might have a deal for you if you want to work on the eagle, do some trading? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-28-2010, 11:14 PM	#63
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 72 gmc sierra now getting parted We can probably work something out I may run by tomorrow after work, you going to be around? Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

12-28-2010, 11:24 PM	#64
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: 72 gmc sierra now getting parted Randy 75 works I will take it pending pics. I need to get some money in my paypal anyway. I am 100% in as of now. Thanks. Posted via Mobile Device __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

12-29-2010, 12:27 AM	#65
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 gmc sierra now getting parted Jeff, only here till 5:00, pool night, but I'll be around Thurs evening Bguild, I'll get pics. I can store it for awhile no problem, I've got other cabs, beds, rearends, bumpers and alot of other stuff sold thats stored around here Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-29-2010, 01:41 AM	#66
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: 72 gmc sierra now getting parted Randy will take the wiper switch pm me your address Posted via Mobile Device __________________ WITNESS Dont be like me be better than me

12-29-2010, 08:44 AM	#67
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: 72 gmc sierra now getting parted Is there any differences in the trailering arms from 1/2 to 3/4 ton?



Register or Log In To remove these advertisements.

12-29-2010, 09:27 AM	#68
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 gmc sierra now getting parted redmonster, I'll pm you j.kim, some 3/4 ton had a extra plate on bottom is all, not all had them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-29-2010, 10:12 AM	#69
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,995	Re: 72 gmc sierra now getting parted do you have any 5 lug steel wheels that a dog dish hubcap will fit on?

12-29-2010, 12:29 PM	#70
mdaven@aol.com Registered User Join Date: Dec 2010 Location: Diana, TX Posts: 125	Re: 72 gmc sierra now getting parted Randy, Still need a column shifter and an ashtray bracket (I have the ashtray). Might be interested in the tilt column if still available. Thanks, Marvin

12-29-2010, 01:27 PM	#71
409impala1 Registered User Join Date: Dec 2005 Location: nebraska Posts: 136	Re: 72 gmc sierra now getting parted finally get a windshield and trim, after I gave up, figures, however, still have not got a new one yet.

12-29-2010, 01:52 PM	#72
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 gmc sierra now getting parted Leroy-B1. yes I have some I'll get some pics later today, I get $20 a wheel plus shipping Marvin, no shifter right now. What year ash tray bracket you needing for? Tilt is still available Mark, sorry I figured yuo already got one Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-29-2010 at 01:54 PM.

12-29-2010, 03:49 PM	#73
vette442 Registered User Join Date: Feb 2007 Location: McMurray, PA Posts: 46	Re: 72 gmc sierra now getting parted I can't tell from the pics if it has shoulder belts. If it has them - and you'd sell them - I'd be interested in the two mounting bolts that are shoulder height behind each door. Zip is 15317. Thanks. __________________ '72 C-10 Highlander LWB '96 Corvette LT4 Coll. Ed. '72 455/M20 Cutlass Supreme (1 of 77) '72 442 455/TH400 '70 Cutlass Supreme SX455 conv. '72 Cutlass Supreme 350/TH350

12-29-2010, 03:58 PM	#74
mdaven@aol.com Registered User Join Date: Dec 2010 Location: Diana, TX Posts: 125	Re: 72 gmc sierra now getting parted Randy, My truck is 1970 C10. How much for the tilt shipped and does it include the shifter? Thanks, Marvin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.