Help identifying frame bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brn agn · 12-29-2010, 01:53 PM

Can anyone identify the brackets below? They are located on the top of the frame on the driver's side, just ahead of the cab in the engine bay. The first picture is a 67 frame and the second one is a 71. I assume that they are used with the engine limiting straps, but wanted to make sure before I cut them off... Thanks in advance!

teeitup · 12-29-2010, 01:57 PM

clutch assembly mounts on them

**LockDoc** · 12-29-2010, 02:09 PM

-
Randy is correct. If you are ever going to install a manual transmission in either one of them you will need the bracket, unless you go to a hydraulic clutch.

LockDoc

brn agn · 12-29-2010, 03:03 PM

Thanks guys! I really appreciate it.

12-29-2010, 01:53 PM	#1
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Help identifying frame bracket Can anyone identify the brackets below? They are located on the top of the frame on the driver's side, just ahead of the cab in the engine bay. The first picture is a 67 frame and the second one is a 71. I assume that they are used with the engine limiting straps, but wanted to make sure before I cut them off... Thanks in advance! __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

12-29-2010, 01:57 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Help identifying frame bracket clutch assembly mounts on them __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-29-2010, 02:09 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Help identifying frame bracket - Randy is correct. If you are ever going to install a manual transmission in either one of them you will need the bracket, unless you go to a hydraulic clutch. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-29-2010 at 02:15 PM.

12-29-2010, 03:03 PM	#4
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: Help identifying frame bracket Thanks guys! I really appreciate it. __________________ 1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.