Mystery brackets/spring from a 67?? ID help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 12-13-2010, 05:02 AM

I removed these brackets/spring from the floor of a 67 truck. They mount under the seat. I have never seen these on a truck before. At first I thought they were for a factory jack...but the OEM jack retaining spring and mounting hardaware is also present in the passenger cab corner (like I have seen in all 67-72 trucks) What are they for?? Thanks for the help.

The other "hook" type bracket pictured in the lower right I also found on the floor of the truck. It was not bolted to anything. Is it OEM for something? Thanks again for the help.

JimKshortstep4x4 · 12-13-2010, 08:58 AM

I have not seen many 67's but I believe that the jack handle was held in place with the brackets and spring. Later it was moved to the cab corner.

Jim

Lee H · 12-13-2010, 10:19 AM

Yes, brackets and spring to hold jack. Not sure where in a 67. Someone will will post up a picture.

into69z · 12-13-2010, 11:03 AM

It's probably for the jack and handle on a 67 CST with buddy buckets-the corner where the jacks are normally stored had a carpeted piece along with a covering for the gas tank so there was no access to get at a jack in the corner-did you get that at Ecology? Steve

**too much stuff** · 12-13-2010, 11:19 AM

I think all the 67s had that set up.

**VetteVet** · 12-13-2010, 11:23 AM

Hummm I'll have to take a look at mine.

oldblue1968chevy · 12-13-2010, 12:11 PM

my 68 had that too

**LockDoc** · 12-13-2010, 12:35 PM

-
Yes, that is for the jack handle and lug wrench hold down under the seat. I think I have a pic somewhere. I'll have to look.

Here's the pic of the '67 jack instructions decal. Not to good but maybe you can get an Idea. Maybe someone has a better picture or maybe the decal is available from one of the vendors.

LockDoc

**leddzepp** · 12-13-2010, 07:49 PM

Quote:

Originally Posted by JimKshortstep4x4

I have not seen many 67's but I believe that the jack handle was held in place with the brackets and spring. Later it was moved to the cab corner.

Jim

Thanks Jim! My 72's have the jack handle and lug wrench in the cab corner, so this makes sense.

Quote:

Originally Posted by into69z

It's probably for the jack and handle on a 67 CST with buddy buckets-the corner where the jacks are normally stored had a carpeted piece along with a covering for the gas tank so there was no access to get at a jack in the corner-did you get that at Ecology? Steve

It was in a 67 with buddy buckets, and I wondered if that had anything to do with it so I also pulled them too just in case

I got these at an Ecology. Been working out of town lately on the side and also picked some other truck parts from other yards. I am coming up on a lot of 67-68's.

Quote:

Originally Posted by LockDoc

-
Yes, that is for the jack handle and lug wrench hold down under the seat. I think I have a pic somewhere. I'll have to look.

Here's the pic of the '67 jack instructions decal. Not to good but maybe you can get an Idea. Maybe someone has a better picture or maybe the decal is available from one of the vendors.

Thanks for the pic Leon! This confirms it.

LockDoc

Thanks for the pic Leon! This confirms it.

67chevy1series · 12-13-2010, 08:34 PM

67 68 had them in the hump under where the 3rd person seats it was in 69 that i was moved to the corner

**leddzepp** · 12-13-2010, 08:57 PM

Quote:

Originally Posted by 67chevy1series

67 68 had them in the hump under where the 3rd person seats it was in 69 that i was moved to the corner

Thanks. Do you know what the other hook bracket is for in the pic? it was just floating around.

Cole Trickle · 12-13-2010, 09:04 PM

Intresting....

My truck dosent have either so if you find a 69 jack and handle chingas let me know

**LockDoc** · 12-14-2010, 02:19 PM

Quote:

Originally Posted by leddzepp

Thanks. Do you know what the other hook bracket is for in the pic? it was just floating around.

I think there are two brackets besides the end ones. If you look close at the picture you can see a bigger one at the back and a smaller one in the front that the spring goes under.

LockDoc

**leddzepp** · 01-02-2011, 02:31 AM

Quote:

Originally Posted by Cole Trickle

Intresting....

My truck dosent have either so if you find a 69 jack and handle chingas let me know

encontrado las chingas

http://67-72chevytrucks.com/vboard/s....php?p=4375307

67chevy1series · 01-02-2011, 02:34 AM

the one with a hook thing to the left is one of the spacers that bolts on the bottom of the gas tank and it is close to the hump and the one to the right is for the jack

12-13-2010, 05:02 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,023	Mystery brackets/spring from a 67?? ID help please I removed these brackets/spring from the floor of a 67 truck. They mount under the seat. I have never seen these on a truck before. At first I thought they were for a factory jack...but the OEM jack retaining spring and mounting hardaware is also present in the passenger cab corner (like I have seen in all 67-72 trucks) What are they for?? Thanks for the help. The other "hook" type bracket pictured in the lower right I also found on the floor of the truck. It was not bolted to anything. Is it OEM for something? Thanks again for the help. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

12-13-2010, 08:58 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Mystery brackets/spring from a 67?? ID help please I have not seen many 67's but I believe that the jack handle was held in place with the brackets and spring. Later it was moved to the cab corner. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

12-13-2010, 10:19 AM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Mystery brackets/spring from a 67?? ID help please Yes, brackets and spring to hold jack. Not sure where in a 67. Someone will will post up a picture. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

12-13-2010, 11:03 AM	#4
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	Re: Mystery brackets/spring from a 67?? ID help please It's probably for the jack and handle on a 67 CST with buddy buckets-the corner where the jacks are normally stored had a carpeted piece along with a covering for the gas tank so there was no access to get at a jack in the corner-did you get that at Ecology? Steve __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

12-13-2010, 11:19 AM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,770	Re: Mystery brackets/spring from a 67?? ID help please I think all the 67s had that set up. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-13-2010, 11:23 AM	#6
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,718	Re: Mystery brackets/spring from a 67?? ID help please Hummm I'll have to take a look at mine. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

12-13-2010, 12:11 PM	#7
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Mystery brackets/spring from a 67?? ID help please my 68 had that too __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-13-2010, 12:35 PM	#8
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,656	Re: Mystery brackets/spring from a 67?? ID help please - Yes, that is for the jack handle and lug wrench hold down under the seat. I think I have a pic somewhere. I'll have to look. Here's the pic of the '67 jack instructions decal. Not to good but maybe you can get an Idea. Maybe someone has a better picture or maybe the decal is available from one of the vendors. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-13-2010 at 12:56 PM.

12-13-2010, 08:34 PM	#10
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Mystery brackets/spring from a 67?? ID help please 67 68 had them in the hump under where the 3rd person seats it was in 69 that i was moved to the corner

12-13-2010, 09:04 PM	#12
Cole Trickle C-10 Club Member Join Date: Mar 2010 Location: Corona,CA Posts: 1,001	Re: Mystery brackets/spring from a 67?? ID help please Intresting.... My truck dosent have either so if you find a 69 jack and handle chingas let me know __________________ 1969 Short Fleet 350/SM465 4.5/6.5 ECE drop 20" Raceline Wheels 1998 2dr Tahoe 5/7 drop 20"/22" Coys-sold Build thread...http://67-72chevytrucks.com/vboard/s...d.php?t=401910

01-02-2011, 02:34 AM	#15
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Mystery brackets/spring from a 67?? ID help please the one with a hook thing to the left is one of the spacers that bolts on the bottom of the gas tank and it is close to the hump and the one to the right is for the jack

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.