![]() |
![]() |
#1 |
U.S. Army Green Beret Sniper
![]() Join Date: Dec 2009
Location: Enterprise Alabama
Posts: 57
|
I could you some help
With my 72 C10 V8 running at idle, when I turn on the headlights the fuel gauge drops below empty, turn signal indicators become dim when that specific signal is used. My alternator is at 15.6 volts at idle. I have a internal regulator alternator. I was thinking that my system is not getting regulated properly. With the truck running at idle without the lights turned on, when I select any turn signal the gas gauge goes below empty. What do you think...........
__________________
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: I could you some help
I think your cluster isn't grounded properly or your cluster isn't pinned correctly.
Did you switch from a dummy light cluster to a gauges cluster?
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
#3 |
U.S. Army Green Beret Sniper
![]() Join Date: Dec 2009
Location: Enterprise Alabama
Posts: 57
|
Re: I could you some help
I changed the original style cluster electrical panel to the original configuration.
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: I could you some help
I am not following you (been a long day). What did you change?
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
![]() |
![]() |
![]() |
#5 |
U.S. Army Green Beret Sniper
![]() Join Date: Dec 2009
Location: Enterprise Alabama
Posts: 57
|
Re: I could you some help
Sorry, I changed the cluster circuit panel that has the copper internal wiring for the instrument lights, turn signal indicators etc........
__________________
![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Apr 2004
Location: Greenville, Tx.
Posts: 286
|
Re: I could you some help
It sounds as of u have a bad ground. sheck those out first.
__________________
1968 chevy U.S. Navy |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2001
Location: Benbrook, TX
Posts: 1,060
|
Re: I could you some help
Ground the cluster. Small ground wire from cluster to a good ground under the dash.
__________________
69 swb stepside, rebuild and upgrade in progress |
![]() |
![]() |
![]() |
#8 |
U.S. Army Green Beret Sniper
![]() Join Date: Dec 2009
Location: Enterprise Alabama
Posts: 57
|
Re: I could you some help
Thanks, I will do that tomorrow. I will let you know what happens. Again thanks for the help and information....
__________________
![]() |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: I could you some help
i don't follow what it was you replaced, but if the interment panel was removed, then odds are you have a bad ground. Classic symptoms
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: I could you some help
Normal alternator voltage should 13.5 to 14.6 your 15.6 seems a little high
__________________
Fuzzy |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|