GMC Vin decode help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 01-12-2011, 08:53 PM

I searched and found this http://67-72chevytrucks.com/Chevyear.html but its way off for a GMC I'm looking at.

The VIN is KM1590DZC1009A

I hope it matches up with what I believe the truck to be. Thanks in advance,

Jud

**Bob B.** · 01-12-2011, 09:15 PM

Yeah, '67 GMC VIN numbers are a bit different than Chevys. Anyway, off the top of my head you got a 1/2 ton 4X4 with the GMC V-6 in it.

smorg007 · 01-12-2011, 09:32 PM

I found this site. It might help with GMC VIN's
http://outintheshop.com/vin_decode.html

75gmc454 · 01-12-2011, 10:06 PM

The 67 GMC's are very similar to the 66 numbers.

K= 4x4
M= V6
1= 1/2 ton
59= cab to rear axle dimension. LWB I think.
OD= wide side box
Z= Fremont CA plant
C= 1967
1009= sequence #
A= 6000 GVW or less.

I have a GMC that I bought that is a 67 short wheel base that is 4x4 and a v6. My vin number has a 57 where yours is 59 and my sequence # is only about 40 off from your truck. All other digits are the same.

Tell us more about your truck.

Vintage Windmills · 01-12-2011, 10:27 PM

Thanks! Yes, it matches up exactly with what you decoded ('67, lwb, fleet, 305v6, 4x4, 1/2 ton) Its an oregon truck so Fremont would make sense. Sent down payment today!! I'm going to do a new thread for the truck when I get it home!
Do you know anything about the sequence #?

75gmc454 · 01-12-2011, 11:27 PM

That sounds good.
The sequence # is just truck #. I guess they started with 1001, but I don't know if that is for all trucks or just 1/2 ton 4x4's. Maybe a GMC expert can help with this.

I have a very similar situation. My truck is still in California, but I have already paid for it.

What are you going to do about shipping your truck to MN.

Vintage Windmills · 01-12-2011, 11:53 PM

I should also mention it is a big back window, not sure if that explains the model # though.

I just sent payment a few hours ago and haven't figured it out yet. I'll probably post in the regional forum here for that region and see if they can recommend anyone to ship. I'd consider driving it but this truck doesn't even run and has been sitting 5 years. I could use a road trip but then again it'd be through the mountains in winter so that could be a bad decison. Bottom line- I need to do some thinking.

**too much stuff** · 01-13-2011, 12:31 AM

Ok, quit holding back... lets see some more pics... Sounds like a road trip with a trailer.

01-12-2011, 08:53 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	GMC Vin decode help I searched and found this http://67-72chevytrucks.com/Chevyear.html but its way off for a GMC I'm looking at. The VIN is KM1590DZC1009A I hope it matches up with what I believe the truck to be. Thanks in advance, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-12-2011, 09:15 PM	#2
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,318	Re: GMC Vin decode help Yeah, '67 GMC VIN numbers are a bit different than Chevys. Anyway, off the top of my head you got a 1/2 ton 4X4 with the GMC V-6 in it. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

01-12-2011, 09:32 PM	#3
smorg007 Registered User Join Date: May 2010 Location: Redding, Ca Posts: 371	Re: GMC Vin decode help I found this site. It might help with GMC VIN's http://outintheshop.com/vin_decode.html

01-12-2011, 10:06 PM	#4
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: GMC Vin decode help The 67 GMC's are very similar to the 66 numbers. K= 4x4 M= V6 1= 1/2 ton 59= cab to rear axle dimension. LWB I think. OD= wide side box Z= Fremont CA plant C= 1967 1009= sequence # A= 6000 GVW or less. I have a GMC that I bought that is a 67 short wheel base that is 4x4 and a v6. My vin number has a 57 where yours is 59 and my sequence # is only about 40 off from your truck. All other digits are the same. Tell us more about your truck. Last edited by 75gmc454; 01-12-2011 at 11:22 PM.

01-12-2011, 10:27 PM	#5
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: GMC Vin decode help Thanks! Yes, it matches up exactly with what you decoded ('67, lwb, fleet, 305v6, 4x4, 1/2 ton) Its an oregon truck so Fremont would make sense. Sent down payment today!! I'm going to do a new thread for the truck when I get it home! Do you know anything about the sequence #? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 01-12-2011 at 10:33 PM. Reason: clarification

01-12-2011, 11:27 PM	#6
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: GMC Vin decode help That sounds good. The sequence # is just truck #. I guess they started with 1001, but I don't know if that is for all trucks or just 1/2 ton 4x4's. Maybe a GMC expert can help with this. I have a very similar situation. My truck is still in California, but I have already paid for it. What are you going to do about shipping your truck to MN.

01-12-2011, 11:53 PM	#7
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: GMC Vin decode help I should also mention it is a big back window, not sure if that explains the model # though. I just sent payment a few hours ago and haven't figured it out yet. I'll probably post in the regional forum here for that region and see if they can recommend anyone to ship. I'd consider driving it but this truck doesn't even run and has been sitting 5 years. I could use a road trip but then again it'd be through the mountains in winter so that could be a bad decison. Bottom line- I need to do some thinking. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-13-2011, 12:31 AM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: GMC Vin decode help Ok, quit holding back... lets see some more pics... Sounds like a road trip with a trailer. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.