Who Sold rear bumper Brackets for a Leaf Spring 2wd frame ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 06-28-2003, 10:20 AM

I need to get a pair soon. I remember some vendor said that they were avaible soon.

Thanks

69 Short Fleet · 06-28-2003, 11:45 AM

If I remember right I think it was Wes at Classic Heartbeat, later Doug

*Gee_Emm* · 06-28-2003, 01:24 PM

I used regular sport bumper brackets on my 3/4 ton leaf 2wd and they work just fine.

72MARIO · 06-28-2003, 01:25 PM

Wierd..

*Gee_Emm* · 06-28-2003, 01:30 PM

I thought they were different too, but after asking on here it was determined that there is no difference in the brackets or the difference was minimal, I cant remember which it was.

69 Short Fleet · 06-28-2003, 02:40 PM

They need some grinding done to them so the bumper can be adjusted more towards the ground. I can't open my tailgate after I tightened up the 4 bolts (the bolts that go through the frame rails) as the bumper now sits a little too high. But I've never got around to it as of yet. At least thats how it is on my truck (rear leafs C/10), regards Doug

06-28-2003, 10:20 AM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Who Sold rear bumper Brackets for a Leaf Spring 2wd frame ? I need to get a pair soon. I remember some vendor said that they were avaible soon. Thanks __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-28-2003, 01:25 PM	#4
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Wierd.. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-28-2003, 11:45 AM	#2
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	If I remember right I think it was Wes at Classic Heartbeat, later Doug

06-28-2003, 01:24 PM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I used regular sport bumper brackets on my 3/4 ton leaf 2wd and they work just fine.

06-28-2003, 01:30 PM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I thought they were different too, but after asking on here it was determined that there is no difference in the brackets or the difference was minimal, I cant remember which it was.

06-28-2003, 02:40 PM	#6
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	They need some grinding done to them so the bumper can be adjusted more towards the ground. I can't open my tailgate after I tightened up the 4 bolts (the bolts that go through the frame rails) as the bumper now sits a little too high. But I've never got around to it as of yet. At least thats how it is on my truck (rear leafs C/10), regards Doug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.