TX Parting 72 Cheyenne Super - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zwhb02 · 01-16-2011, 11:59 PM

how much for the cab ?

zwhb02 · 01-17-2011, 07:41 AM

Cab still available ? If so additional photos ..

lynnfield · 01-17-2011, 12:45 PM

The cab is still available, PM sent

projectjimmie68 · 01-18-2011, 09:49 AM

Are the transmission lines still available? If so how much plus shipping to zip 32136? Thanks Prejectjimmie

snarfy · 01-18-2011, 11:35 AM

I need all the upper side molding trim clips. The ones without the nut & stud. If you won't sell them separate, then how much for the upper side molding trim wth all the clips? Ship to 46514

1956cameo · 01-18-2011, 05:43 PM

Lynnfield, I got all the parts! I thought of more stuff I need if it is still available. I need the power steering brackets and the valve covers. Let me know if they are still up for grabs and for how much. Thanks!

lynnfield · 01-18-2011, 09:30 PM

projectjimmie68, crig39 is sending a money order, I have contacted him, I'll let you know if he passes

snarfy, The doors are gone, but I still have the fenders and bedsides. Let me see how many of those type clips there are.

1956cameo, Harlan, glad your parts arrived in good order. I assume you are wanting stock original valve covers. If so, I have those and the p/s brackets. Let me check the condition and post pics for you. Probably, tomorrow I'm working nights 5pm - 5am right now (SHHH, don't tell anyone). Greg

lynnfield · 01-19-2011, 08:52 PM

projectjimmie68, I received crig39's money order for those items today.

snarfy, There were some of the clips you wanted still attached, but they broke when I tried to remove them, sorry.

1956cameo, I have both items you asked about. the valve covers are not pretty, but I don't see any dents so they should clean up nice. The p/s bracket is in good shape. Hows $65 shipped? I will get the pics posted tomorrow.

1956cameo · 01-20-2011, 08:17 AM

lynnfield, Let me get back to you. I was telling my dad about the parts I needed last night and he thinks he might have some of it. Let me see what he has this weekend then I will confirm with you what I need. Sorry for the delay. Until then dont feel like you have to hold the parts for me.

lynnfield · 01-20-2011, 09:37 PM

1956cameo, Pics for you

lynnfield · 01-21-2011, 11:00 PM

Pics for crig39

roughedup72 · 01-27-2011, 10:11 PM

lynnfield, Just to let you know I did receive the ac control panel and the pig tale.thanks. It was in great shape.. I still havent installed it though. Been to busy myself.

Fesser · 02-23-2011, 09:59 AM

I'll take the power steering pump and brackets. Thanks.

classic1967chevy · 02-23-2011, 10:04 AM

Quote:

Originally Posted by lynnfield

More Pics

what do you want fo the seat shipped to 35578

classic1967chevy · 02-23-2011, 10:16 AM

Quote:

Originally Posted by lynnfield

Bbb

ill also take the taillights and chrome that goes with them how much shipped to 35578

trapperjack · 02-27-2011, 09:38 PM

Would you sell just the one long male belt and long female belt, no retractors?
Need them for a middle set of belts. Shipping to 78642, I'd just send cash.
Thanks

lynnfield · 02-27-2011, 11:29 PM

Sure, $25 shipped, or you can have it all $30 shipped. Greg

trapperjack · 02-27-2011, 11:45 PM

Quote:

Originally Posted by lynnfield

Sure, $25 shipped, or you can have it all $30 shipped. Greg

What the heck, I'll take em all for $30. Wish I'd known about this stuff when I was in Waco a week ago. Could probably talk myself into a bunch of stuff, cash and carry.
You can pm me your info, is cash ok, or check? Either is fine with me.
Thanks,
Jack

hector68 · 02-27-2011, 11:52 PM

Interested in power steering assembly pump hoses brackets etc. Everything but the gear box if still available thanks shipped to 77521
Posted via Mobile Device

lynnfield · 02-27-2011, 11:53 PM

Come back!!!

I'll send you home with a ton of stuff

lynnfield · 02-28-2011, 12:00 AM

hector68, I sold the one in the pic, but I have another one. I'll have to check on the hoses, I tend to pitch them, because most have cracks or are no good. Greg

lynnfield · 02-28-2011, 12:14 AM

hector68, just checked, I have one with the hoses, pump and bracket from a running truck. $65 to your door. Greg

RCbowtie69 · 03-01-2011, 11:54 PM

Hey lynnfield, looking at this thread,just want ask if you sold the cargo light housing & harness,i may have miss it as i was looking & if still have it.How much,Randy

lynnfield · 03-02-2011, 02:27 AM

Randy, the cargo light is sold. This thread got so long....... I took the left over parts and started a new thread and it sold there. This thread keeps comming to the top from time to time. Sorry, Greg

RCbowtie69 · 03-02-2011, 07:34 PM

Thats ok Greg, i got your PM & thanks

01-16-2011, 11:59 PM	#151
zwhb02 Registered User Join Date: Dec 2010 Location: Montgomery, Texas Posts: 14	Re: Parting 72 Cheyenne Super how much for the cab ?

01-17-2011, 07:41 AM	#152
zwhb02 Registered User Join Date: Dec 2010 Location: Montgomery, Texas Posts: 14	Re: Parting 72 Cheyenne Super Cab still available ? If so additional photos ..

01-17-2011, 12:45 PM	#153
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super The cab is still available, PM sent

01-18-2011, 09:49 AM	#154
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: Parting 72 Cheyenne Super Are the transmission lines still available? If so how much plus shipping to zip 32136? Thanks Prejectjimmie

01-18-2011, 11:35 AM	#155
snarfy Registered User Join Date: Jul 2005 Location: Minnesota Posts: 7	Re: Parting 72 Cheyenne Super I need all the upper side molding trim clips. The ones without the nut & stud. If you won't sell them separate, then how much for the upper side molding trim wth all the clips? Ship to 46514

01-18-2011, 05:43 PM	#156
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Parting 72 Cheyenne Super Lynnfield, I got all the parts! I thought of more stuff I need if it is still available. I need the power steering brackets and the valve covers. Let me know if they are still up for grabs and for how much. Thanks! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-18-2011, 09:30 PM	#157
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super projectjimmie68, crig39 is sending a money order, I have contacted him, I'll let you know if he passes snarfy, The doors are gone, but I still have the fenders and bedsides. Let me see how many of those type clips there are. 1956cameo, Harlan, glad your parts arrived in good order. I assume you are wanting stock original valve covers. If so, I have those and the p/s brackets. Let me check the condition and post pics for you. Probably, tomorrow I'm working nights 5pm - 5am right now (SHHH, don't tell anyone). Greg

01-19-2011, 08:52 PM	#158
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super projectjimmie68, I received crig39's money order for those items today. snarfy, There were some of the clips you wanted still attached, but they broke when I tried to remove them, sorry. 1956cameo, I have both items you asked about. the valve covers are not pretty, but I don't see any dents so they should clean up nice. The p/s bracket is in good shape. Hows $65 shipped? I will get the pics posted tomorrow.

01-20-2011, 08:17 AM	#159
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Parting 72 Cheyenne Super lynnfield, Let me get back to you. I was telling my dad about the parts I needed last night and he thinks he might have some of it. Let me see what he has this weekend then I will confirm with you what I need. Sorry for the delay. Until then dont feel like you have to hold the parts for me. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

01-20-2011, 09:37 PM	#160
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super 1956cameo, Pics for you Attached Images

01-21-2011, 11:00 PM	#161
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super Pics for crig39 Attached Images

01-27-2011, 10:11 PM	#162
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: Parting 72 Cheyenne Super lynnfield, Just to let you know I did receive the ac control panel and the pig tale.thanks. It was in great shape.. I still havent installed it though. Been to busy myself. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

02-23-2011, 09:59 AM	#163
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Parting 72 Cheyenne Super I'll take the power steering pump and brackets. Thanks.

02-27-2011, 09:38 PM	#166
trapperjack Registered User Join Date: Nov 2006 Location: The Republic of Texas Posts: 361	Re: Parting 72 Cheyenne Super Would you sell just the one long male belt and long female belt, no retractors? Need them for a middle set of belts. Shipping to 78642, I'd just send cash. Thanks __________________ 1962 Chevy K10 factory 4x4 stepside longbed http://67-72chevytrucks.com/vboard/s...d.php?t=494632 1967 Chevy 3/4 ton 4x4 long bed (Henrietta) traded 1968 Chevy 1/2 ton panel wagon, V8 and powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=483345 1978 Ford F250, beater stepside 2008 Jeep Wrangler 4 Door 2010 Chevy 4x4 plain jane work truck

02-27-2011, 11:29 PM	#167
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super Sure, $25 shipped, or you can have it all $30 shipped. Greg



Register or Log In To remove these advertisements.

02-27-2011, 11:52 PM	#169
hector68 Registered User Join Date: Feb 2011 Location: baytown, tx Posts: 84	Re: Parting 72 Cheyenne Super Interested in power steering assembly pump hoses brackets etc. Everything but the gear box if still available thanks shipped to 77521 Posted via Mobile Device

02-27-2011, 11:53 PM	#170
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super Come back!!! I'll send you home with a ton of stuff

02-28-2011, 12:00 AM	#171
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super hector68, I sold the one in the pic, but I have another one. I'll have to check on the hoses, I tend to pitch them, because most have cracks or are no good. Greg

02-28-2011, 12:14 AM	#172
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super hector68, just checked, I have one with the hoses, pump and bracket from a running truck. $65 to your door. Greg

03-01-2011, 11:54 PM	#173
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Parting 72 Cheyenne Super Hey lynnfield, looking at this thread,just want ask if you sold the cargo light housing & harness,i may have miss it as i was looking & if still have it.How much,Randy

03-02-2011, 02:27 AM	#174
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting 72 Cheyenne Super Randy, the cargo light is sold. This thread got so long....... I took the left over parts and started a new thread and it sold there. This thread keeps comming to the top from time to time. Sorry, Greg

03-02-2011, 07:34 PM	#175
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Parting 72 Cheyenne Super Thats ok Greg, i got your PM & thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.