Blazer Hardtop brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71blazerman · 06-30-2003, 09:50 AM

I desperately need the brackets that hold the blazer top to the windshield frame. I found a local guy with a double wall, still looking for a single wall. thanks

Scott

bouncytruck · 06-30-2003, 12:14 PM

which brackets? The ones that have the sunvisors, the other two, all four?

71blazerman · 06-30-2003, 12:20 PM

I didn't realize there were different types of these, whatever you have, I just need to keep the hardtop on.

Crew Dawg · 06-30-2003, 12:50 PM

Check out coloradok5. They may have something for you.

TrucknVA · 06-30-2003, 01:32 PM

I have set of brackets from a 72 DOUBLE WALL TOP? Do you have a pic somewhere of what your looking for?
I have a few other blazer parts laying around also?

71blazerman · 06-30-2003, 02:01 PM

I don't have any pics of these, can someone take a pic of theirs?

TrucknVA, I sent you a PM.

Thanks,
Scott

mkmiller1 · 06-30-2003, 02:56 PM

Here is a pic of the brackets(need two) that go in the center. If you have sunvisor brackets, you've got the outer ones. In the sunvisor brackets there is a hole to put a bolt thru to screw into the top at the corners. If you don't hook up with some one else I've got what you need.
Thanks,
Matthew

71blazerman · 06-30-2003, 03:30 PM

Were the bolt pattens on windshield frame and top the same regardless of which brackets you have? I have a separate pattern on my windshield frame for the sunvisors like the pic shown, so are there two types of windshield frames and two types of bolt patterns for single and double wall tops? Was one pattern for the single wall and one for the double? Thanks for the clarrification guys, I thought I knew all about these trucks, fun learning again.

Scott

mkmiller1 · 06-30-2003, 11:14 PM

Scott-To the best of my knowledge both tops buckle down the same on the windshield frame, they only bolt different on the bedsides.

Matthew

06-30-2003, 09:50 AM	#1
71blazerman Registered User Join Date: Dec 2002 Location: Omaha Nebraska Posts: 119	Blazer Hardtop brackets I desperately need the brackets that hold the blazer top to the windshield frame. I found a local guy with a double wall, still looking for a single wall. thanks Scott __________________ 67 Impala SS Conv 66 Caprice 396 No more trucks.... someday though

06-30-2003, 12:14 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	which brackets? The ones that have the sunvisors, the other two, all four? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

06-30-2003, 12:20 PM	#3
71blazerman Registered User Join Date: Dec 2002 Location: Omaha Nebraska Posts: 119	I didn't realize there were different types of these, whatever you have, I just need to keep the hardtop on. __________________ 67 Impala SS Conv 66 Caprice 396 No more trucks.... someday though

06-30-2003, 12:50 PM	#4
Crew Dawg Registered User Join Date: Jan 2003 Location: Jacksonville, AR Posts: 35	Check out coloradok5. They may have something for you. __________________ 69 Chevy swb 72 blazer 4wd

06-30-2003, 02:01 PM	#6
71blazerman Registered User Join Date: Dec 2002 Location: Omaha Nebraska Posts: 119	I don't have any pics of these, can someone take a pic of theirs? TrucknVA, I sent you a PM. Thanks, Scott __________________ 67 Impala SS Conv 66 Caprice 396 No more trucks.... someday though

06-30-2003, 01:32 PM	#5
TrucknVA Registered User Join Date: Jun 2003 Location: VA Posts: 3	I have set of brackets from a 72 DOUBLE WALL TOP? Do you have a pic somewhere of what your looking for? I have a few other blazer parts laying around also?

06-30-2003, 02:56 PM	#7
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Here is a pic of the brackets(need two) that go in the center. If you have sunvisor brackets, you've got the outer ones. In the sunvisor brackets there is a hole to put a bolt thru to screw into the top at the corners. If you don't hook up with some one else I've got what you need. Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

06-30-2003, 03:30 PM	#8
71blazerman Registered User Join Date: Dec 2002 Location: Omaha Nebraska Posts: 119	Were the bolt pattens on windshield frame and top the same regardless of which brackets you have? I have a separate pattern on my windshield frame for the sunvisors like the pic shown, so are there two types of windshield frames and two types of bolt patterns for single and double wall tops? Was one pattern for the single wall and one for the double? Thanks for the clarrification guys, I thought I knew all about these trucks, fun learning again. Scott __________________ 67 Impala SS Conv 66 Caprice 396 No more trucks.... someday though

06-30-2003, 11:14 PM	#9
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Scott-To the best of my knowledge both tops buckle down the same on the windshield frame, they only bolt different on the bedsides. Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.