Custom cab trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nachodog2 · 01-19-2011, 07:42 PM

I put some custom cab trim pieces on my 64 gmc and they tend to sick out a bit at the top. I was told that there is a little clip that attatches to the top rear part to hold it down, if so does anyone have any pics?
Posted via Mobile Device

jbgroby · 01-19-2011, 08:07 PM

Are you speaking of the "Custom" trim badges that mount on the pillar?

nachodog2 · 01-19-2011, 08:10 PM

The one on the cab behind the door.
Posted via Mobile Device

PAPA KENT · 01-20-2011, 02:35 AM

Name: Copy of radios 002.jpg
Views: 502
Size: 28.1 KB

Name: Copy of radios 003.jpg
Views: 496
Size: 24.9 KB

Name: radios 004.jpg
Views: 506
Size: 21.4 KB

this is the bracket for the custom cab trim on my 62.you will notice that the bracket has a raised lip that the moulding slides into.
good luck!
kent.

nachodog2 · 01-20-2011, 07:56 AM

Thank you papa.
Posted via Mobile Device

*lakeroadster* · 01-20-2011, 08:53 AM

LMC Catalog ........

nachodog2 · 01-20-2011, 09:20 AM

Hey lakeroadster, what catalog is that from?
Posted via Mobile Device

*lakeroadster* · 01-20-2011, 09:29 AM

Quote:

Originally Posted by nachodog2

Hey lakeroadster, what catalog is that from?
Posted via Mobile Device

Sorry, I'll add it to my post... it's LMC.

nachodog2 · 01-20-2011, 10:00 AM

Thank you.
Posted via Mobile Device

PAPA KENT · 01-20-2011, 12:10 PM

Quote:

Originally Posted by nachodog2

Thank you papa.
Posted via Mobile Device

your welcome.

**Clyde65** · 01-20-2011, 01:52 PM

They wont sell just the little bracket, been there, tried that. Maybe someone here knows someone who can make them?

SIR · 01-20-2011, 02:31 PM

industrial strength dubble sided tape...no holes.

**Clyde65** · 01-20-2011, 02:33 PM

yea, that would work!^^^^^^^^^^

Greg63 · 01-20-2011, 03:56 PM

Quote:

Originally Posted by SIR

industrial strength dubble sided tape...no holes.

That is what I used to put my side trim on - from front to back.
Greg

*lakeroadster* · 01-20-2011, 07:00 PM

Quote:

Originally Posted by Clyde65

They wont sell just the little bracket, been there, tried that. Maybe someone here knows someone who can make them?

I used two pan head sheet metal screws on each bracket and let the trim slip under the screw heads. Works great, you can adjust the screws in or out to get the fit just right.

astrochimp · 01-21-2011, 12:50 PM

Could someone do a mechanical drawing of the brackets & location?
It would make a great sticky/how to.

David

*lakeroadster* · 01-21-2011, 06:57 PM

Quote:

Originally Posted by astrochimp

Could someone do a mechanical drawing of the brackets & location?
It would make a great sticky/how to.

David

Did you do a search? I seem to remember this has already been posted previously.

kiknrocks · 01-22-2011, 12:17 PM

Here's a pretty good tech article.

http://www.64moneypit.pages.qpg.com/...ucks/id77.html

chopper john · 01-26-2011, 02:23 AM

i have a friend that might have some . i can have him make a template if you want let me know

nachodog2 · 01-26-2011, 07:58 AM

Hablando e andando johnnie, if i knew it was that easy, i would'a asked you already. Thanx homie!
Posted via Mobile Device

chopper john · 01-26-2011, 09:32 PM

alright ill call him

01-19-2011, 07:42 PM	#1
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Custom cab trim I put some custom cab trim pieces on my 64 gmc and they tend to sick out a bit at the top. I was told that there is a little clip that attatches to the top rear part to hold it down, if so does anyone have any pics? Posted via Mobile Device __________________ Stock is good but custom is the sh*t!

01-19-2011, 08:07 PM	#2
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: Custom cab trim Are you speaking of the "Custom" trim badges that mount on the pillar? __________________ http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 01-19-2011 at 08:08 PM.

01-19-2011, 08:10 PM	#3
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Re: Custom cab trim The one on the cab behind the door. Posted via Mobile Device __________________ Stock is good but custom is the sh*t!

01-20-2011, 02:35 AM	#4
PAPA KENT Registered User Join Date: Nov 2010 Location: Lolo montana Posts: 361	Re: Custom cab trim this is the bracket for the custom cab trim on my 62.you will notice that the bracket has a raised lip that the moulding slides into. good luck! kent.

01-20-2011, 07:56 AM	#5
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Re: Custom cab trim Thank you papa. Posted via Mobile Device __________________ Stock is good but custom is the sh*t!

01-20-2011, 08:53 AM	#6
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Custom cab trim LMC Catalog ........ Attached Images Last edited by lakeroadster; 01-20-2011 at 09:30 AM.

01-20-2011, 09:20 AM	#7
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Re: Custom cab trim Hey lakeroadster, what catalog is that from? Posted via Mobile Device __________________ Stock is good but custom is the sh*t!

01-20-2011, 10:00 AM	#9
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Re: Custom cab trim Thank you. Posted via Mobile Device __________________ Stock is good but custom is the sh*t!

01-20-2011, 01:52 PM	#11
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Custom cab trim They wont sell just the little bracket, been there, tried that. Maybe someone here knows someone who can make them? __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-20-2011, 02:31 PM	#12
SIR SIR Join Date: Apr 2005 Location: grants pass oregon,usa Posts: 658	Re: Custom cab trim industrial strength dubble sided tape...no holes. __________________ 66long low fleet http://community.webshots.com/user/LVNR66

01-20-2011, 02:33 PM	#13
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Custom cab trim yea, that would work!^^^^^^^^^^ __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-21-2011, 12:50 PM	#16
astrochimp Registered User Join Date: Aug 2009 Location: Unionville Mo. Posts: 217	Re: Custom cab trim Could someone do a mechanical drawing of the brackets & location? It would make a great sticky/how to. David

01-22-2011, 12:17 PM	#18
kiknrocks 65 Chevy Join Date: Nov 2009 Location: LODI Ca Posts: 144	Re: Custom cab trim Here's a pretty good tech article. http://www.64moneypit.pages.qpg.com/...ucks/id77.html

01-26-2011, 02:23 AM	#19
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: Custom cab trim i have a friend that might have some . i can have him make a template if you want let me know

01-26-2011, 07:58 AM	#20
nachodog2 Hell yeah!!! Join Date: Aug 2010 Location: canyon country Ca. Posts: 264	Re: Custom cab trim Hablando e andando johnnie, if i knew it was that easy, i would'a asked you already. Thanx homie! Posted via Mobile Device __________________ Stock is good but custom is the sh*t!



Register or Log In To remove these advertisements.

01-26-2011, 09:32 PM	#21
chopper john Registered User Join Date: Oct 2009 Location: anaheim ca Posts: 274	Re: Custom cab trim alright ill call him

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.