70 3/4 ton 4x4 owners -front diff parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 06-01-2003, 05:12 PM

i'm parting a 70 3/4 ton dana 44 front differential, i sold the drums ,brake hardware and locking hubs but still have everything else. i'm going to convert it to 73 up disc brakes/axle shafts.
spindles-$20.00 each
backing plates-$10.00 each
hubs-$10.00 each
axle shafts-$20.00 each
stock steering arm-$5.00
this style front end was only used for one model year--open knuckle with drum brakes and i wanted to offer it here first before it goes on ebay.

**jerry moss** · 06-03-2003, 09:52 AM

anyone interested ?????

**JIMs70GMC** · 06-03-2003, 10:41 AM

Jerry, I might need something else. Let me get the drums on first. Thanks,

**jerry moss** · 06-03-2003, 07:58 PM

Jim,
sounds good, just let me know if you need any of the extra parts.

MeannGrumpy · 06-29-2003, 04:31 PM

Hi Jerry, are the hubs in fairly decent shape////

MeannGrumpy · 06-29-2003, 04:34 PM

Hi Jerrey, are the hubs in fairly decent shape/////

**jerry moss** · 06-29-2003, 06:16 PM

they are in good condition. no spun races or stripped holes.

MeannGrumpy · 07-01-2003, 09:51 PM

Hi Jerry; Are the hubs complete with origional type Blue type
lock outs on the outsides of the hubs ? shipping is going to get ugly, can you give me an estimated weight for me to work with.

**jerry moss** · 07-01-2003, 11:05 PM

the locking hubs are sold already, all i have left are the bearing/wheel hubs.

MeannGrumpy · 07-02-2003, 08:10 PM

Sorry Jerry, it was the locking hub parts I was looking for.

06-01-2003, 05:12 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	70 3/4 ton 4x4 owners -front diff parts i'm parting a 70 3/4 ton dana 44 front differential, i sold the drums ,brake hardware and locking hubs but still have everything else. i'm going to convert it to 73 up disc brakes/axle shafts. spindles-$20.00 each backing plates-$10.00 each hubs-$10.00 each axle shafts-$20.00 each stock steering arm-$5.00 this style front end was only used for one model year--open knuckle with drum brakes and i wanted to offer it here first before it goes on ebay. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

06-03-2003, 09:52 AM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	anyone interested ????? __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

06-03-2003, 10:41 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Jerry, I might need something else. Let me get the drums on first. Thanks, __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-03-2003, 07:58 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Jim, sounds good, just let me know if you need any of the extra parts. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

06-29-2003, 04:31 PM	#5
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	4x4 hubs Hi Jerry, are the hubs in fairly decent shape//// __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

06-29-2003, 04:34 PM	#6
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	4x4 hubs Hi Jerrey, are the hubs in fairly decent shape///// __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

06-29-2003, 06:16 PM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	MeannGrumpy they are in good condition. no spun races or stripped holes. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-01-2003, 09:51 PM	#8
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	decent hubs Hi Jerry; Are the hubs complete with origional type Blue type lock outs on the outsides of the hubs ? shipping is going to get ugly, can you give me an estimated weight for me to work with. __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

07-01-2003, 11:05 PM	#9
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	the locking hubs are sold already, all i have left are the bearing/wheel hubs. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-02-2003, 08:10 PM	#10
MeannGrumpy Registered User Join Date: Jan 2003 Location: Medicine Hat, Alberta,Canada Posts: 64	hub parts Sorry Jerry, it was the locking hub parts I was looking for. __________________ 1970 Longhorn, factory air & Cruise,Tach vac 1970 C 20 3/4 4x4 350 with turbo 350 auto,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.