72 door screws

[makman1297]

Does anyone know where you can find the screws that go in the doors below the vent window on the 72's? I have looked in several catalogs under the door and window and never see them listed or mentioned. All I need are ones the look decent, they don't half to be original. Thanks

[So.Cal.Super]

check out gmc paul's

http://www.gmcpauls.com/interior%20bolts_&_misc__2.htm

I think this is what you want

Vent Window Pillar Screws Set
300041 1967-72 Vent window assembly pillar screws for both doors. $2.25

you may want to call to verify

[makman1297]

I think those are the ones that hold the vent window into the door, the ones i am talking about actually hold the outside and inside of the door together right under the vent window, one per side and are only on the 72 model doors. Thanks

[So.Cal.Super]

I know the one's your talking about as I have them on my door's I just never looked for them to replace them. You may call paul or wes at classic heartbeat Toll Free 888-338-2502
just a thought

[teeitup]

I don't think they repro them yet. I've sold alot of mine in the past to a parts dealer in KC, he told me they don't make them

[makman1297]

Does anyone have a picture of one not installed so i can try to find something that will work? Somehow that last owner must of removed both of them and threw them away.

[71 super]

Those can be some of the hardest things to find- and they should be the most common Check with Randy- teeitup, Dennis - Sharpie or tom Korenik as they part alot of trucks and should have what you are looking for.

[flashed]

If you find someone with extras let me know.

[teeitup]

THANKS Harold!!!!!! I do have some but not sure condition. I'm gone all day Fri so I can get pics Sat
Thanks Randy

[BLACK AND BLUE 67-72]

Well I do know that they are a phillips head sheetmetal screw with a funky looking washer that fits over the head to catch in the door. Not sure what size or length they are, they are fairly long from what I can remember though.

[makman1297]

Yeah i figured they were a sheet metal trim style of screw. I guess finding a washer or something will be the trick. Thanks

[teeitup]

Yes they are sheet metal type about 2 1/2 long I think and a stainless cup type bushing

[rsavage]

My 71 Blazer has the screws and they are the original doors. A hard rubber insert goes in the hole in the door. The screw is about 2 3/16" long and it is like a number 6 or 8 size screw. It has a very slight oval head - almost flat. It reminds me of the lower dash AC outlet screws, but I haven't had time to compare. Here are a couple of photos:
""



""

[dadsworktruck]

Here is a pic of the door screw and bushing.i did a google search and came up with a couple places that had the screw or one close enough, but havent found the bushing yet, altho i think a person could make one from something like sink water inlet pipe and flair the end, unless you just got to have oem , and nos...myself dd is good enough....

[makman1297]

Maybe you could just flare a piece of brake line and clean it up. The screw looks easy enough to find. Thanks

[LockDoc]

-
Here is a picture I have.

LockDoc

[yob2kanobe]

Check with Duncan & Son, he supplied me with a couple for my 72.

[ls1nova71]

If Randy doesn't have any, PM me, I have some lying around somewhere, I'll just have to find them.
Posted via Mobile Device

[Lee H]

I'm also interested in the screws and inserts. If anyone has an extra set please pm me and I'll send money.

[makman1297]

Thanks.