Core Suppoort Cushions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Richard Dobson · 07-03-2003, 02:42 PM

I have noticed that there are core support cushion sets for 67-68 Chevy & 69-72 Chevy. I have also noticed that LMC sells a set that must me generic for 67-72. I bought one from LMC and noticed that the cushions are 1/4" approx. thicker than the ones for a 67-68 which is the front end that I am putting on my truck. Will this cause fit-up problems with sheet metal components fenders, grill, hood etc.?

**john** · 07-03-2003, 05:15 PM

You will probably have less problems with fit if you call one of the board vendors and replace cab and support mounts at the same time. You will more likely get the right parts for your truck. If you replace just the support mounts you will probably have to shim the cab mounts anyhow. 1/4" is quite a bit. Good luck John

MOTHERTRUCKERS · 07-03-2003, 08:23 PM

It's a good idea to change all mounts at one time to keep your fenders etc. in alignment, and yes 67-8 and 69-72 are different core mounts.

Nelson · 07-03-2003, 11:33 PM

Front & Rear cab cushions usually come together in a set with hardware.

07-03-2003, 02:42 PM	#1
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Core Suppoort Cushions I have noticed that there are core support cushion sets for 67-68 Chevy & 69-72 Chevy. I have also noticed that LMC sells a set that must me generic for 67-72. I bought one from LMC and noticed that the cushions are 1/4" approx. thicker than the ones for a 67-68 which is the front end that I am putting on my truck. Will this cause fit-up problems with sheet metal components fenders, grill, hood etc.? __________________ Richard Dobson

07-03-2003, 05:15 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	You will probably have less problems with fit if you call one of the board vendors and replace cab and support mounts at the same time. You will more likely get the right parts for your truck. If you replace just the support mounts you will probably have to shim the cab mounts anyhow. 1/4" is quite a bit. Good luck John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 07-03-2003 at 05:19 PM.

07-03-2003, 08:23 PM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	It's a good idea to change all mounts at one time to keep your fenders etc. in alignment, and yes 67-8 and 69-72 are different core mounts. __________________ Rest in Peace Ed. Thanks for all the good times.

07-03-2003, 11:33 PM	#4
Nelson Registered User Join Date: Jun 2001 Location: cambridge,ont,canada Posts: 128	Front & Rear cab cushions usually come together in a set with hardware. __________________ Nelson 1970 C10 350 Auto. A/C not Working

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.