The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-02-2011, 08:03 PM   #1
Andyboy
Registered User
 
Andyboy's Avatar
 
Join Date: May 2010
Location: Visalia, CA
Posts: 376
fumes and squeeks

My truck is squeeking every bump on the road, its driving crazy. Is there anything i can do for that? The shocks look very old. Also the exhaust fumes are killing me. Just standing outside of the truck and you can smell it alot. The spark plugs are brown I'll be putting new ones on tomorrow. Where do i start guys? Thanks for any info you guys can give me.
Andyboy is offline   Reply With Quote
Old 03-02-2011, 10:39 PM   #2
weeble
Registered User
 
weeble's Avatar
 
Join Date: Dec 2008
Location: Falls Church Va
Posts: 84
Re: fumes and squeeks

You could start with the shocks, but you probably need to replace some of your suspension and/ or cab bushings. And as for the fumes you probably need to adjust your carb.

Last edited by weeble; 03-02-2011 at 10:39 PM.
weeble is offline   Reply With Quote
Old 03-02-2011, 10:48 PM   #3
60ratrod
yes, i do
 
60ratrod's Avatar
 
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
Re: fumes and squeeks

is it only at idle that the exhaust fumes are really bad? or can you smell them while going down the road? if its only at idle then its running rich at idle and you need to adjust the idle mixture screws and chech to make sure the choke flap is opening all the way. for the squeeks, it could be the shocks, but it wouldn't be a bad idea to replace the suspension bushings either.
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND
_______________________________________________________________________________________________

-60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination"
-07 gmt900 silverado 1500 lt xcab z71, granite blue
-81 suzuki gs650g "shelah"- current project
-81 kz1000m1 csr "sarge" -next project (just beautification)
-07 kawasaki vulcan classic vn900

Last edited by 60ratrod; 03-02-2011 at 10:49 PM.
60ratrod is offline   Reply With Quote
Old 03-02-2011, 11:19 PM   #4
brad_man_72
the boat guy
 
brad_man_72's Avatar
 
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
Re: fumes and squeeks

sounds like the grease worms are hungry! If you don't feed them grease they eat metal.
Upper and lower ball joints tie rod ends idler arm pitman arm. If you can make the truck squeak while sitting in the driveay have a friend crawl under to see if the can pinpoint the noise.
brad_man_72 is offline   Reply With Quote
Old 03-02-2011, 11:20 PM   #5
Hubscrub
Cruzin
 
Hubscrub's Avatar
 
Join Date: Dec 2009
Location: on the road
Posts: 2,835
Re: fumes and squeeks

Same thought same time/ probably just greaseing all the zerk fitting in the front end would stop the squeaks. There is several-Upper Ball Joints, Lower Ball Joints, Tie Rods end inner and outer, idler arm
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8

Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U

Proverbs 3:5,6

"Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt

In memory of our first baby daughter, daddy and mommy love you.
Danica Grace 6/26/14

Last edited by Hubscrub; 03-02-2011 at 11:21 PM.
Hubscrub is offline   Reply With Quote
Old 03-02-2011, 11:20 PM   #6
Andyboy
Registered User
 
Andyboy's Avatar
 
Join Date: May 2010
Location: Visalia, CA
Posts: 376
Re: fumes and squeeks

Well i think the choke don't work cause i have to hold the gas pedal when i start it in the morning. I'll change the shocks and see what happens. Thanks guys
Andyboy is offline   Reply With Quote
Old 03-03-2011, 09:02 AM   #7
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: fumes and squeeks

Where does it squeek from? Does it sound like up front? Why not lube it before doing the shocks? Does it act like it needs them? You can't go by how they look. Is the ride bouncy or real hard?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 03-03-2011, 12:18 PM   #8
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: fumes and squeeks

Quote:
Originally Posted by special-K View Post
Where does it squeek from? Does it sound like up front? Why not lube it before doing the shocks? Does it act like it needs them? You can't go by how they look. Is the ride bouncy or real hard?
I had a squeek like that for about 8 months, turned out to be the muffler hanger under the cab. I used some bushing grease for the synthetic bushings on the rubber part of it and its gone.
dwcsr is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:06 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com