Help with front sway bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mallory · 03-08-2011, 10:24 PM

I got this sway bar along with some other 68 parts. Im not gonna use it on my 68 build and i'm wanting to sell it . I just want to know what all years it will fit so i dont mis represent it as something its not. Any help would be greatly appreciated.

Thanks Jimmy

**70C10Toejam** · 03-09-2011, 12:12 AM

Looks like a factory sway bar, fits up to '87.

**Clyde65** · 03-09-2011, 10:56 AM

ummm, looks just like the one I have on my truck and it is from a 72, I believe they went from the round mounts at the a-arm to the end links some where in the 73 model year I believe.

so I would say 63-72 on the fitment, 71-72 should be bolt up and 63-70 should be bolt up with a few holes drilled into the a-arm.

Mallory · 03-09-2011, 09:46 PM

Thanks

Jimmy

oldblue1968chevy · 03-09-2011, 10:51 PM

Up to 87. May want to note the diameter of the bar in the add also

03-08-2011, 10:24 PM	#1
Mallory Registered User Join Date: Dec 2010 Location: Valdosta Georgia Posts: 58	Help with front sway bar I got this sway bar along with some other 68 parts. Im not gonna use it on my 68 build and i'm wanting to sell it . I just want to know what all years it will fit so i dont mis represent it as something its not. Any help would be greatly appreciated. Thanks Jimmy Attached Images

03-09-2011, 12:12 AM	#2
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Help with front sway bar Looks like a factory sway bar, fits up to '87. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

03-09-2011, 10:56 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Help with front sway bar ummm, looks just like the one I have on my truck and it is from a 72, I believe they went from the round mounts at the a-arm to the end links some where in the 73 model year I believe. so I would say 63-72 on the fitment, 71-72 should be bolt up and 63-70 should be bolt up with a few holes drilled into the a-arm. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-09-2011, 09:46 PM	#4
Mallory Registered User Join Date: Dec 2010 Location: Valdosta Georgia Posts: 58	Re: Help with front sway bar Thanks Jimmy

03-09-2011, 10:51 PM	#5
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Help with front sway bar Up to 87. May want to note the diameter of the bar in the add also __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.