Centerline Tomahawk Snipe

[lil hoodlum]

Good day everyone,

I know this information has been discussed in many different threads but so help me, I am still confused.

Background, 1968 C10 2" lower springs in front with stock height spindles with aftermarket disc brakes. Stock height rear end 12 bolt narrow width.

I want to get a set of Centerline Tomahawk series Snipe. Part #207 7806 655. 17.0" X 8.0" 6 X 5.5" bolt pattern with the large bore (3.5"). The rims are only offered with 5" backspace.

http://centerlinewheels.com/wheel_de...olt&data=6-5.5


My question is, how will the 5" back space look? Will I have any issues with tire rubbing. I most likely will be using 235/75R17 up front and 255/70R17 in the rear.

I just measured my axles and disc brake hubs. Rear axle is right at 3.5". Disc brake hubs are a little under 3".

Any help would be appreciated before I make a costly mistake $$$.

Keith

[lil hoodlum]

to the top

[lil hoodlum]

anybody?

[RCbowtie69]

Looking good, it's 6 lug for your truck,there's not much out there for 6 lug trucks,they are very nice rims

[clos69]

With ur stock rearend...u can go with 4.5 or 4.75in bs In the rear and still tuck ur tires under...up front i suggest a 5.25bs to tuck the fronts...but the best thing u can do is measure it urself.
Posted via Mobile Device