brad2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lbbdoc · 07-16-2003, 09:06 PM

lets see more more and more pics of your rides!!!!!!!

brad2 · 07-16-2003, 10:35 PM

Geez your going to give me the big head:p

Okay since you asked here is my driver. I really enjoy this one. It's 1 of 1500 GTI 337's. It really dirty in the pic. Most likely going to sell it and get a cheap car so I can continue to finance my addiction.

brad2 · 07-16-2003, 10:36 PM

This is just another side view of the 74. I'll try to get a few pics of it tomorrow. I have the cheap steel wheels on it right now and it looks different.

brad2 · 07-16-2003, 10:41 PM

This is what my Jimmy looked like early last summer. I like N2TRUX have a seemingly never ending project here. When this pic was taken I had just gotten back from a shop where it collected dust for fourteen months. Plus I had to wait to even get it into this shop. I was so disgusted I told them sell it or I'm comeing to get it. Once I got it home I remembered how much I liked it.

brad2 · 07-16-2003, 10:43 PM

Here is where the cut was made to lean the windshield back a little.

brad2 · 07-16-2003, 10:46 PM

after working on the winshield the cowl was shave and welded onto the truck.

brad2 · 07-16-2003, 10:52 PM

doorjam in progress

bagged81 · 07-16-2003, 10:52 PM

You need to post this stuff more often. Its inspiring.

brad2 · 07-16-2003, 10:53 PM

Ah ha.......new latches

brad2 · 07-16-2003, 10:55 PM

This is the start of the frame. It was a Morrison front clip with extra long rails. The air bag mounts have already been cut of in the pic. They wouldn't make one for shockwaves so we did.

brad2 · 07-16-2003, 10:58 PM

All this.......not useing it.

bigblock73 · 07-16-2003, 11:01 PM

Lookin good, how much lower will the lid sit now??

...Jeff

brad2 · 07-16-2003, 11:05 PM

After some work it fits.

**N2TRUX** · 07-16-2003, 11:08 PM

Brad2,

Wow!

I'm impressed. It looks like you what you are getting done is awesome. I love the 69-72 Blazers. That's what I wanted before I bought my 82, but couldn't find anything worth having. It looks like you started with a nice one.

Don't give up! I have finally found a shop that will get mine done in a decent amount of time. As soon as I get the shop where it's at to finish the core support, it's going to Stoked out Specialties in Rockwall.

They just finished up a quickie project for me. After seeing the quality of their work, and the timely manner they finished this other truck in, I really feel like I have found what I am looking for....

Is that an early sixties Impala cluster laying in your floorboard...

SCOTI · 07-17-2003, 12:18 AM

Stoked out Specialties is the sh!t. I know they have @ least 1.5 guys around that know the right way to do things . . ....

lbbdoc · 07-17-2003, 12:19 AM

keep the pics coming they are sweet very sweet!!!!!!!!!!!!!

brad2 · 07-17-2003, 12:37 AM

I have posted most all this on the 67-72 side over the last year. I do appreciate the feedback though. I had a good pick to show how much lower it is but I can't find it. It wasn't designed to "lay frame" but it gets pretty low. The rocker are a couple of inches off the ground. There is something about planting a vehicle on the ground that just doesn't look right to me. I think it is because you loose the the differentation between it and the ground. It has room for an easy body drop by just changing the body mounts though.

SCOTI · 07-17-2003, 06:28 AM

Brad2, I couldn't agree more. I just don't care for the rockers to be planted on the ground . . .... even @ shows. Now, give me an extremely low truck that can drive @ speed . . .... slammed & I need heart meds . . .....

lbbdoc · 07-17-2003, 01:33 PM

well brad2 when ever you find more pics feel free to post them hear.

brad2 · 07-17-2003, 08:13 PM

here are two of the pics I was looking for.

brad2 · 07-17-2003, 08:15 PM

This is how low it gets. It will be driveable here also.

lbbdoc · 07-18-2003, 01:34 PM

that looks soo cool i got chill bumps
i love your ride.

PHOENIX · 07-18-2003, 04:52 PM

Quote:

Originally posted by brad2
All this.......not useing it.

Can I have the red tool box and the jackstands then?

j/k

All your rides look good to me.

Keep us posted, I think we all like to see pictures.

Chevy_68 · 07-19-2003, 02:08 AM

how do you put your fenders on with the cowl welded to the door do you have to put them on with the doors off or what . but its still bad ass blazer and a bad ass mod to blend the cowl to the pillars

brad2 · 07-19-2003, 10:16 AM

Quote:

Originally posted by Chevy_68
how do you put your fenders on with the cowl welded to the door do you have to put them on with the doors off or what . but its still bad ass blazer and a bad ass mod to blend the cowl to the pillars

The cowl is welded to the windshield frame. Haveing the doors off would help. One of the bolts is still fairly accesible. One the inside a holesaw was used to cut a access hole. A nut is welded on the fender. So you do one from inside and one outside.

07-16-2003, 09:06 PM	#1
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	brad2 lets see more more and more pics of your rides!!!!!!!

07-16-2003, 10:35 PM	#2
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	Geez your going to give me the big head:p Okay since you asked here is my driver. I really enjoy this one. It's 1 of 1500 GTI 337's. It really dirty in the pic. Most likely going to sell it and get a cheap car so I can continue to finance my addiction. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:36 PM	#3
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	This is just another side view of the 74. I'll try to get a few pics of it tomorrow. I have the cheap steel wheels on it right now and it looks different. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:41 PM	#4
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	This is what my Jimmy looked like early last summer. I like N2TRUX have a seemingly never ending project here. When this pic was taken I had just gotten back from a shop where it collected dust for fourteen months. Plus I had to wait to even get it into this shop. I was so disgusted I told them sell it or I'm comeing to get it. Once I got it home I remembered how much I liked it. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:43 PM	#5
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	Here is where the cut was made to lean the windshield back a little. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:46 PM	#6
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	after working on the winshield the cowl was shave and welded onto the truck. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:52 PM	#7
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	doorjam in progress Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:52 PM	#8
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	You need to post this stuff more often. Its inspiring. __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link

07-16-2003, 10:53 PM	#9
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	Ah ha.......new latches Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:55 PM	#10
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	This is the start of the frame. It was a Morrison front clip with extra long rails. The air bag mounts have already been cut of in the pic. They wouldn't make one for shockwaves so we did. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 10:58 PM	#11
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	All this.......not useing it. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 11:01 PM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Lookin good, how much lower will the lid sit now?? ...Jeff

07-16-2003, 11:05 PM	#13
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	After some work it fits. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-16-2003, 11:08 PM	#14
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Brad2, Wow! I'm impressed. It looks like you what you are getting done is awesome. I love the 69-72 Blazers. That's what I wanted before I bought my 82, but couldn't find anything worth having. It looks like you started with a nice one. Don't give up! I have finally found a shop that will get mine done in a decent amount of time. As soon as I get the shop where it's at to finish the core support, it's going to Stoked out Specialties in Rockwall. They just finished up a quickie project for me. After seeing the quality of their work, and the timely manner they finished this other truck in, I really feel like I have found what I am looking for.... Is that an early sixties Impala cluster laying in your floorboard... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 10-04-2007 at 07:47 PM.

07-17-2003, 12:18 AM	#15
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Stoked out Specialties is the sh!t. I know they have @ least 1.5 guys around that know the right way to do things . . .... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

07-17-2003, 12:19 AM	#16
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	keep the pics coming they are sweet very sweet!!!!!!!!!!!!!

07-17-2003, 12:37 AM	#17
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	I have posted most all this on the 67-72 side over the last year. I do appreciate the feedback though. I had a good pick to show how much lower it is but I can't find it. It wasn't designed to "lay frame" but it gets pretty low. The rocker are a couple of inches off the ground. There is something about planting a vehicle on the ground that just doesn't look right to me. I think it is because you loose the the differentation between it and the ground. It has room for an easy body drop by just changing the body mounts though. __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-17-2003, 06:28 AM	#18
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Brad2, I couldn't agree more. I just don't care for the rockers to be planted on the ground . . .... even @ shows. Now, give me an extremely low truck that can drive @ speed . . .... slammed & I need heart meds . . ..... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-17-2003, 01:33 PM	#19
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	well brad2 when ever you find more pics feel free to post them hear.

07-17-2003, 08:13 PM	#20
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	here are two of the pics I was looking for. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-17-2003, 08:15 PM	#21
brad2 Registered User Join Date: Feb 2001 Location: edmond, ok Posts: 1,056	This is how low it gets. It will be driveable here also. Attached Images __________________ 74 swb 71 2wd Jimmy 82 2wd Blazer

07-18-2003, 01:34 PM	#22
lbbdoc Registered User Join Date: Jul 2003 Location: Lubbock, TX Posts: 113	that looks soo cool i got chill bumps i love your ride.

07-19-2003, 02:08 AM	#24
Chevy_68 Registered User Join Date: Mar 2002 Location: PHX Az Posts: 155	how do you put your fenders on with the cowl welded to the door do you have to put them on with the doors off or what . but its still bad ass blazer and a bad ass mod to blend the cowl to the pillars

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.