![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Raising the bed floor 4 inches
just thought you guys might be interested in how we raised the bed floor on our Joe Touring c-10. Enjoy. Any questions let me know.
![]() |
![]() |
![]() |
![]() |
#2 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
I appologize for the pictures there kind of all over. The guy working on the bed didnt really take enough pictures to show you guys step by step so heres a few shots that kinda show you what we did.
First we unbolted the bed into all the seperate peices. Then we took the factory angle strip moved it up four inches and welded it back in so the bed bolted back together just like it did from the factory. |
![]() |
![]() |
![]() |
#3 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() |
![]() |
![]() |
![]() |
#4 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() |
![]() |
![]() |
![]() |
#7 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() |
![]() |
![]() |
![]() |
#8 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() |
![]() |
![]() |
![]() |
#9 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() |
![]() |
![]() |
![]() |
#10 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() ![]() |
![]() |
![]() |
![]() |
#11 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
![]() ![]() |
![]() |
![]() |
![]() |
#12 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() |
![]() |
![]() |
![]() |
#13 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
Re: Raising the bed floor 4 inches
![]() ![]() |
![]() |
![]() |
![]() |
#14 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Raising the bed floor 4 inches
I may be asking a stupid question but what is the reason for raising it? Is it to gain more clearance under the wheel well for bigger tires?
|
![]() |
![]() |
![]() |
#15 |
Active Member
![]() Join Date: Nov 2010
Location: San Bernardino, Ca.
Posts: 131
|
![]()
To achieve our desired ride height we modified the rear frame in a manner wich required raising the floor.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Mar 2011
Location: Pequannock NJ
Posts: 259
|
Re: Raising the bed floor 4 inches
Looks good nice work. I saw a raised floor at a show once that was held in by jb weld and what looked like about 5 gallona of rtv
![]() |
![]() |
![]() |
![]() |
#17 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Raising the bed floor 4 inches
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|