anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dockbuilder1456 · 06-29-2009, 09:53 PM

asking all if a lokar 23'' shifter is a wise investment or not im looking for pics if someone has or if anyone knows of a nicer floor shifter thanks guys

Frizzle Fry · 06-30-2009, 04:58 PM

Moved to the truck forum for you. Hopefully there will be more responses here.

brak · 06-30-2009, 05:03 PM

i had a thread about this a couple years ago, I'll see if i can find it.
there were a bunch of good pictures posted.

cparman · 06-30-2009, 05:03 PM

I have installed a couple of Lokar automatic trans shifters. I put one in a 58 Chevy truck. I looks like a manual trans floor shifter at first glance. The workings of the shifter itself are great. There is a neutral safety switch, and when the shifter is operated it feels like a quality piece. I do not have any pics, but If I was looking for a floor shift, I would look no farther.

brak · 06-30-2009, 05:23 PM

Found it, but it appears not all the links are still good after 3 years

http://67-72chevytrucks.com/vboard/s...ighlight=lokar

CG · 06-30-2009, 08:43 PM

I read a bunch of stuff about Gennie and Lokar. Both were pretty well liked, but the Gennie came out ahead. I have a 23" Gennie that will be going in my panel.

brak · 07-01-2009, 01:06 AM

yeah, i really like the lokar shifter, they look great, and are well constructed, exactly what you would expect from that company (got to play with one at their traveling display).

Ultimately i decided against it, because of the button being located in the center of the knob. My thumbs just don't work that way, and it's the same complaint i had with my 84 camaro. I prefer to grab the knob over the top, rather than gripping it from the side.

see ten · 07-01-2009, 05:42 AM

We put a Gennie in my wifes 54...and we've got no complaints.

68Stepbed · 07-01-2009, 12:43 PM

Here's what my 23" shifter looked like.

fastom · 07-01-2009, 03:02 PM

Here's mine, it's a Lokar

elf w/capital T · 04-09-2011, 07:53 PM

those look effin sick!

im in the process of installing one i got from a 54 7 ton from the local pick n pull.

mixermike · 04-09-2011, 11:28 PM

here's mine

AusTx68 · 04-09-2011, 11:48 PM

I initially went with a 23" then sent it back. Too long for my taste. Felt like I was in an 18 wheeler. I swapped it out for a 16". Here's a pic for comparison. Excuse the cell phone quality.

**70cst** · 04-10-2011, 12:55 AM

Quote:

Originally Posted by CG

I read a bunch of stuff about Gennie and Lokar. Both were pretty well liked, but the Gennie came out ahead. I have a 23" Gennie that will be going in my panel.

Knowing nothing about either...what are the main differences between the two?

gringoloco · 04-10-2011, 01:16 AM

Recently installed a 16" in my '70- has more of a 'stock' look to it than the 23". The longer one would be cool for a 'rod' though

Very good quality part that works extremely well so far- have yet to actually drive with it. Please excuse the construction zone that is my cab...

ortegamotor · 04-10-2011, 09:21 AM

Hey Gringo, i like your floor shift , looks good , nice install. How's that yellow blazer of yours doing?

gringoloco · 04-10-2011, 11:53 AM

Quote:

Originally Posted by ortegamotor

Hey Gringo, i like your floor shift , looks good , nice install. How's that yellow blazer of yours doing?

It went to Canada with boardmember 'classicchev'. Long story, but it was for the better. Hopefully we'll see some progress out of it soon- he has big plans for it

1low · 04-10-2011, 01:43 PM

hey gringo who makes that shifter

gringoloco · 04-10-2011, 01:47 PM

Quote:

Originally Posted by 1low

hey gringo who makes that shifter

It's a Lokar 16" floor mount with a black anodized knob.

CC69Rat · 04-10-2011, 02:49 PM

I have the 16" Lokar in my truck now, and I love it. Very nice quality.

06-29-2009, 09:53 PM	#1
dockbuilder1456 Registered User Join Date: Jun 2009 Location: medford ny Posts: 13	anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 asking all if a lokar 23'' shifter is a wise investment or not im looking for pics if someone has or if anyone knows of a nicer floor shifter thanks guys

06-30-2009, 04:58 PM	#2
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 Moved to the truck forum for you. Hopefully there will be more responses here.

06-30-2009, 05:03 PM	#3
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 i had a thread about this a couple years ago, I'll see if i can find it. there were a bunch of good pictures posted. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

06-30-2009, 05:03 PM	#4
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 I have installed a couple of Lokar automatic trans shifters. I put one in a 58 Chevy truck. I looks like a manual trans floor shifter at first glance. The workings of the shifter itself are great. There is a neutral safety switch, and when the shifter is operated it feels like a quality piece. I do not have any pics, but If I was looking for a floor shift, I would look no farther.

06-30-2009, 05:23 PM	#5
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 Found it, but it appears not all the links are still good after 3 years http://67-72chevytrucks.com/vboard/s...ighlight=lokar __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 06-30-2009 at 05:26 PM.

06-30-2009, 08:43 PM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,985	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 I read a bunch of stuff about Gennie and Lokar. Both were pretty well liked, but the Gennie came out ahead. I have a 23" Gennie that will be going in my panel.

07-01-2009, 01:06 AM	#7
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 yeah, i really like the lokar shifter, they look great, and are well constructed, exactly what you would expect from that company (got to play with one at their traveling display). Ultimately i decided against it, because of the button being located in the center of the knob. My thumbs just don't work that way, and it's the same complaint i had with my 84 camaro. I prefer to grab the knob over the top, rather than gripping it from the side. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

07-01-2009, 05:42 AM	#8
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 We put a Gennie in my wifes 54...and we've got no complaints.

07-01-2009, 12:43 PM	#9
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 Here's what my 23" shifter looked like. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

07-01-2009, 03:02 PM	#10
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 Here's mine, it's a Lokar Attached Images __________________ Tom: 1968 Chevy SWB ZZ383 W/700R4 Gen-II Compact Vintage Air System PPG paint, Mandarin Copper and Vanilla Shake. http://www.hubgarage.com/mygarage/fastom Stupid should hurt and eventually become fatal! Last edited by fastom; 07-01-2009 at 03:03 PM.

04-09-2011, 07:53 PM	#11
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 994	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 those look effin sick! im in the process of installing one i got from a 54 7 ton from the local pick n pull.

04-09-2011, 11:28 PM	#12
mixermike Registered User Join Date: Jan 2008 Location: Post Falls, Idaho Posts: 606	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 here's mine

04-09-2011, 11:48 PM	#13
AusTx68 Registered User Join Date: Nov 2008 Location: Italy Posts: 1,278	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 I initially went with a 23" then sent it back. Too long for my taste. Felt like I was in an 18 wheeler. I swapped it out for a 16". Here's a pic for comparison. Excuse the cell phone quality. __________________ '68 C-10 SWB 383 Stroker (Sold 3/2/2013) '87 R2500 LWB 454 TBI converted to Carb

04-10-2011, 01:16 AM	#15
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 Recently installed a 16" in my '70- has more of a 'stock' look to it than the 23". The longer one would be cool for a 'rod' though Very good quality part that works extremely well so far- have yet to actually drive with it. Please excuse the construction zone that is my cab... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-10-2011, 09:21 AM	#16
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 Hey Gringo, i like your floor shift , looks good , nice install. How's that yellow blazer of yours doing?



Register or Log In To remove these advertisements.

04-10-2011, 01:43 PM	#18
1low Registered User Join Date: Feb 2010 Location: Moyie Springs ID. Posts: 160	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 hey gringo who makes that shifter

04-10-2011, 02:49 PM	#20
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: anyone have a 23'' lokar or floor shifter pics or ideas for my 70 c10 th350 I have the 16" Lokar in my truck now, and I love it. Very nice quality. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.