wanted AC for 75 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cam · 07-16-2003, 03:48 PM

I recently purchased a 75 4X4 C10 and would like to add AC which on this pickup isn't stock. Does anyone where I could purchase the parts I will need?

Thanks for your help

ItsNotABlazer · 07-16-2003, 05:50 PM

You can go back with a bulky stock system but for same price check out Vintage Air www.vintageair.com They have a kit which completely replaces everything and removes it from firewall for a smotth look. Everything fits under the dash and from what I hear it is a VERY good system. It is what I will putting in the Jimmy when that time comes.

Brad

*mike reeh* · 07-16-2003, 10:25 PM

vintage air is a good way to go but you could retrofit the stock stuff which is very very plentiful if you wanted to. The firewall on your truck is slightly different compared to an AC cab but it should be doable. You would have to find a donor(s) that had everything, from the firewall box, to the compressor and brackets, and the entire ventilation system including levers and switches and wiring harness.... personally I think thats what I would do, but thats just me.

mike

PS- since your truck is 4x4, its a K10 not a C10...

Nvbowtie · 07-18-2003, 04:31 AM

http://www.vintageair.com/download/pdf_singles/48.pdf

07-16-2003, 03:48 PM	#1
cam Registered User Join Date: May 2002 Location: Helena, MT, USA Posts: 64	wanted AC for 75 C10 I recently purchased a 75 4X4 C10 and would like to add AC which on this pickup isn't stock. Does anyone where I could purchase the parts I will need? Thanks for your help __________________ 1970 GMC 1/2 ton 307 4spd 1970 dorF dump runner

07-16-2003, 05:50 PM	#2
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	You can go back with a bulky stock system but for same price check out Vintage Air www.vintageair.com They have a kit which completely replaces everything and removes it from firewall for a smotth look. Everything fits under the dash and from what I hear it is a VERY good system. It is what I will putting in the Jimmy when that time comes. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

07-18-2003, 04:31 AM	#4
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	http://www.vintageair.com/download/pdf_singles/48.pdf __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2003, 10:25 PM	#3
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 683	vintage air is a good way to go but you could retrofit the stock stuff which is very very plentiful if you wanted to. The firewall on your truck is slightly different compared to an AC cab but it should be doable. You would have to find a donor(s) that had everything, from the firewall box, to the compressor and brackets, and the entire ventilation system including levers and switches and wiring harness.... personally I think thats what I would do, but thats just me. mike PS- since your truck is 4x4, its a K10 not a C10...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.