orig.factory color of frt. end pieces? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BUXMAN66 · 07-17-2003, 01:44 AM

i've already rattle-canned the pieces in question(idler arm,tie rod ends,adj.sleeves)a chassis colored black....but was wundering what was the factory color of these pieces? friend of mine has redone the whole frnt.end of his '68 amx in a gray por-15 color,including the center-link and it looks pretty cool in contrast to the chassis black of the upper and lower control arms etc..... anyone know what the factory shipped?

JimKshortstep4x4 · 07-17-2003, 07:12 AM

The parts were not painted, (bare metal).

Jim

BUXMAN66 · 07-17-2003, 12:46 PM

would that mean that they were a cast-iron gray then?

Class of 69 · 07-17-2003, 07:03 PM

If you don't like Satin Black, or Rust, go with the grey! Sounds good to me. I may have to put that on my " To Do " list.

JimKshortstep4x4 · 07-18-2003, 08:49 AM

I use Eastwoods "Spray Gray" which is pretty close to bare metal color.

Jim

BUXMAN66 · 07-18-2003, 11:44 AM

thanks jim!

07-17-2003, 01:44 AM	#1
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	orig.factory color of frt. end pieces? i've already rattle-canned the pieces in question(idler arm,tie rod ends,adj.sleeves)a chassis colored black....but was wundering what was the factory color of these pieces? friend of mine has redone the whole frnt.end of his '68 amx in a gray por-15 color,including the center-link and it looks pretty cool in contrast to the chassis black of the upper and lower control arms etc..... anyone know what the factory shipped? __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

07-17-2003, 12:46 PM	#3
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	would that mean that they were a cast-iron gray then? __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

07-17-2003, 07:03 PM	#4
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	If you don't like Satin Black, or Rust, go with the grey! Sounds good to me. I may have to put that on my " To Do " list. __________________ 69 GMC K10 ..some restoration required....still..

07-18-2003, 11:44 AM	#6
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	thanks jim! __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-17-2003, 07:12 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	The parts were not painted, (bare metal). Jim

07-18-2003, 08:49 AM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I use Eastwoods "Spray Gray" which is pretty close to bare metal color. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.