![]() |
![]() |
#1 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,643
|
![]() 1) Does this type of wheel use the same lug nut as the tapered nuts for OEM steel wheels? I'm thinking about picking one up to replace my split-rim spare. 2) Also, as my studs extend only ~3/16" past the nut with steel wheels, will the aluminum wheel work without longer studs? 3) Lastly, will it be too wide to fit in my OEM under-bed spare carrier with a 235/85-16 mounted? Currently have a 7.50-16 on the split rim -- it's about 8" total width and there's not much apparent capability for anything wider. Thanks, guys
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay Last edited by Stocker; 04-21-2011 at 01:44 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2011
Location: Redmond, OR
Posts: 759
|
Re: 8-Lug Wheel Question
I believe those take the bugle style lug nuts. They also have a lot of offset. They make the rim run about 2" inside the fender when I tried one on mine - looked odd.
__________________
68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress |
![]() |
![]() |
![]() |
#3 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,643
|
Re: 8-Lug Wheel Question
Thanks for the reply. I could live with the offset, as it would only be a spare (knock wood, I have never needed to use the spare yet).
Never heard of bugle style lug nuts, so I Googled it. What I found looks similar to an acorn style, but the important thing is the seat appears to be tapered, so maybe my OEM tapered nuts will work. (I'd rather not carry around an extra set of lug nuts just for the spare....)
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2011
Location: Redmond, OR
Posts: 759
|
Re: 8-Lug Wheel Question
I think the bugle is similar, but the bearing surface is quite a bit larger. Don't know if the taper angle is the same or not, but I think they are.
__________________
68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|