![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2011
Location: Clifton, CO
Posts: 75
|
NP 205 Question...
Does anyone know if an earlier model NP205 T-case can be drilled and tapped to thread in the switch that would turn on the 4 wheel drive light in the dash like the later ones do? I know I should be happy just having a bulletproof case, but you know how it is...
Thanks |
![]() |
![]() |
![]() |
#2 |
One shot, one kill.
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
|
Re: NP 205 Question...
Derk, there is more to it than just drilling and taping in a switch mount. There hasto be something inside the case to move the switch. I wouldn't bother going that route. Find and install a switch on the linkage, then wire up the dash lamp. Wire power to the lamp and let the switch ground the circut out when you engage FWD. jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot ![]() |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jul 2010
Location: Hudsonville, MI
Posts: 174
|
Re: NP 205 Question...
Quote:
Posted via Mobile Device
__________________
_______________________________________________ 1985 Chevy Scottsdale K20 350 with 700R4 running 3.42 gearing aka "The Honey Badger" 1993 Silverado C3500 Ext. Cab Dually 6.5 turbo diesel |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|