EZ-Chassis Kit 2'' Drop..But Want To Go Lower

[ArrowoodRodKustom]

Asking this for a buddy since he's old & no good with computers..he bought the EZ-Chassis kit with the 2'' drop but he wants this truck very low & doesn't want to bag it...what drop would you go with? he has a friend with a brand new 5/7 drop kit for sale but isn't sure if that would be too low or not..pictures attached of the ride height he'd like..let us know what'd you suggest

[BlueJeep]

Start with drop spindles and then see how much lower he wants to go. Some of it will depend on how tall the tires are. If you look at my build thread My cab is 3.5" off the frame, with 2" drop spindles on the front...but I'm running 28" tires front and rear so it's not as low as it could be with shorter tires.

[Dan Bowles]

Look for SgtUSMC's build to see what he did. I'm pretty sure that's his truck on his list there. I think if he wants it that low, he's not going to be happy with a kit. The steering box is really in the way. You'll need to be where BlueJeep suggests. 3.5" from the frame. Ours is 5" from the frame and we are at about 8" from running board to ground on our '54 with no spindle drop. It may also matter if you have 4 cyl vs 6 cyl springs. We've got 3" blocks in the rear.