1 Ton Axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kybol · 07-24-2003, 07:23 PM

I am thinking of buying a set of axles form a guy for $2000, it is a D60 in front and a 14 bolt in rear, both have detroit lockers and disc brakes. Is it a good deal? do they just swap into any 73-87 4x4??

**kwmech** · 07-24-2003, 09:09 PM

I am in No. Calif. and here that would be a fair price if it is exactlly what they claim in this area.

drink2mny · 07-24-2003, 11:19 PM

they get 1200-1500 for front chevy 60's over here in spokane wa.
and 250 for regular 14 bolts..add 300 forthe disk brake kits we sell and there ya have it..plus add for lockers

Big money..
So it does sound like a good deal

http://members.aol.com/drink2mny/blazer.jpg

6869704X4 · 07-24-2003, 11:19 PM

The 60 should bolt right in. The 1ton 14s have a different spring perch width.

jeffspower · 07-25-2003, 12:00 AM

If you buy them, make sure to get the u-bolt plates. The front plates are unique to the 60. The rear are different than a half ton, and usually on the bottom instead of the top like most 3/4 tons- top or bottom will both work as tube dia. is the same. Dually rear plates are different yet [bigger tube]. The front brake hoses are different also. front pinion yoke takes the same u-joint. rear yoke is the same as a 3/4 ton, bigger than a 1/2 ton. - and yep, 1 ton 14's spring pads are 40" c/c. 1/2 & 3/4 are 42" c/c.

Kybol · 07-25-2003, 12:24 AM

The think is in the rear it is set up for a 3 link suspension w/ coil springs, but they are both 4.56's and this is Canadian dollars also.

1969 GMC · 07-25-2003, 01:38 AM

math time kiddies:

dana 60 front: $1500
corp 14 bolt FF : $200
detroit locker @ $600 x2: $1200
disc brakes for 14 b: $300

total: $3200 (US Dollars)

that is a steal at the advertised price...isn't $2000 CDN like $75 USD? lol :p

if it didn't fit your truck as is, I would make it fit.

07-24-2003, 07:23 PM	#1
Kybol Registered User Join Date: Mar 2003 Location: Alberta, Canada Posts: 205	1 Ton Axles I am thinking of buying a set of axles form a guy for $2000, it is a D60 in front and a 14 bolt in rear, both have detroit lockers and disc brakes. Is it a good deal? do they just swap into any 73-87 4x4?? __________________ -90 454ss http://www.imagestation.com/album/?id=4289115843 -04 TRX450R -77 c-10 http://www.imagestation.com/album/?id=4290506213 SOLD -82 c-10 SOLD -02 CRF450 SOLD

07-24-2003, 11:19 PM	#3
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	they get 1200-1500 for front chevy 60's over here in spokane wa. and 250 for regular 14 bolts..add 300 forthe disk brake kits we sell and there ya have it..plus add for lockers Big money.. So it does sound like a good deal http://members.aol.com/drink2mny/blazer.jpg __________________ Support The Board

07-24-2003, 11:19 PM	#4
6869704X4 Registered User Join Date: Jul 2002 Location: SE NM Posts: 769	The 60 should bolt right in. The 1ton 14s have a different spring perch width. __________________ The more I learn about women, the more I love my truck.

07-25-2003, 12:24 AM	#6
Kybol Registered User Join Date: Mar 2003 Location: Alberta, Canada Posts: 205	The think is in the rear it is set up for a 3 link suspension w/ coil springs, but they are both 4.56's and this is Canadian dollars also. __________________ -90 454ss http://www.imagestation.com/album/?id=4289115843 -04 TRX450R -77 c-10 http://www.imagestation.com/album/?id=4290506213 SOLD -82 c-10 SOLD -02 CRF450 SOLD

07-25-2003, 01:38 AM	#7
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	math time kiddies: dana 60 front: $1500 corp 14 bolt FF : $200 detroit locker @ $600 x2: $1200 disc brakes for 14 b: $300 total: $3200 (US Dollars) that is a steal at the advertised price...isn't $2000 CDN like $75 USD? lol :p if it didn't fit your truck as is, I would make it fit. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

07-24-2003, 09:09 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	I am in No. Calif. and here that would be a fair price if it is exactlly what they claim in this area.

07-25-2003, 12:00 AM	#5
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	If you buy them, make sure to get the u-bolt plates. The front plates are unique to the 60. The rear are different than a half ton, and usually on the bottom instead of the top like most 3/4 tons- top or bottom will both work as tube dia. is the same. Dually rear plates are different yet [bigger tube]. The front brake hoses are different also. front pinion yoke takes the same u-joint. rear yoke is the same as a 3/4 ton, bigger than a 1/2 ton. - and yep, 1 ton 14's spring pads are 40" c/c. 1/2 & 3/4 are 42" c/c.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.