CA Parting a 1967 GMC 1/2 great parts to be had - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ortegamotor · 05-25-2011, 02:34 PM

Parting out a 1967 long bed . there is no motor or tranny in the truck. every thing you see in the pictures is there. the fenders , hood and doors are solid and straight , all the glass is good shape as well.

fender r/l $100. ea PASS SIDE SOLD, STILL HAVE DRIVER SIDE THERE ARE STILL PARTS ALOT OF GREAT PARTS !!!!
doors are still available r/l $ 100.ea
hood no dents no rust. $75. [C
steering wheel with GMC emblem $50 SOLD
complete bed it's actually in real good shape very straight. $200 complete. there is no tail gate
windshield and back glass $50 ea.

just PM me with any other questions .

ortegamotor · 05-25-2011, 02:36 PM

Parting out a 1967 long bed . there is no motor or tranny in the truck. every thing you see in the pictures is there. the fenders , hood and doors are solid and straight , all the glass is good shape as well.

fender r/l $100. ea
doors r/l $ 100.ea
hood no dents no rust. $75.
grill $60
steering wheel with GMC emblem $50
complete bed it's actually in real good shape very straight. $200 complete. there is no tail gate
windshield and back glass $50 ea.

just PM me with any other questions . thanks for your time. Tony

Leroy-B1 · 05-25-2011, 03:15 PM

How much for the fender badges?
Posted via Mobile Device

yellowGT · 05-25-2011, 03:42 PM

do you have knobs and retainers for the light switch and the wipers? I also need the glove box locking latch that screws into the dash.

budnikguy · 05-25-2011, 03:47 PM

second inline for fender badges...also, do you have the arm rests? How about exterior door handles? Rearview mirror?

Quote:

Originally Posted by Leroy-B1

How much for the fender badges?
Posted via Mobile Device

2002yanks · 05-25-2011, 03:58 PM

hows the grille(any damage)? can you post a better pic(if damage pics of it)? interested depending on shipping cost and new pics. do you have the light bezels for it?

**70STOVEBOLT** · 05-25-2011, 04:28 PM

Got a cig lighter? Really just need the knob part.

Thanks,
Mark

**Chevy4Life** · 05-25-2011, 04:40 PM

How much for the right front fender shipped to 89014?
Thanks,
Jay

UP GRADE · 05-25-2011, 04:42 PM

do you have the key to the ingition switch if so how much?

19stepSide72 · 05-25-2011, 05:03 PM

interested in passenger side inner fender if not eaten up and driver fender if in good shape. any rust? Thanks Rob

Legolas894 · 05-25-2011, 05:53 PM

What's the steering wheel like under the wrap?

Vintage Windmills · 05-25-2011, 07:16 PM

I'd like to get in line for grille and headlight bezels.

ortegamotor · 05-25-2011, 07:17 PM

Yellow GT: so $ 10 for the knobs and latch , wheres it going? tony

Re: Parting a 1967 GMC 1/2 great parts to be had
do you have knobs and retainers for the light switch and the wipers? I also need the glove box locking latch that screws into the dash.
__________________

Vintage Windmills · 05-25-2011, 07:22 PM

Is there a tailgate with small GMC letters?

jlaird · 05-25-2011, 07:50 PM

put me in line for both fenders if you are willing to ship.

Fesser · 05-25-2011, 08:02 PM

I am interested in the heater controls. I could get them when I come for the blazer doors.

Fesser · 05-25-2011, 08:08 PM

I'd like to be in line for the steering wheel too, depending on condition.

67chevy1series · 05-25-2011, 09:14 PM

how much for the vent windows, wing windows, port windows, what ever they call them. do they have good chrome glass and rubber? can i see some pics? thanks rick

ortegamotor · 05-25-2011, 09:51 PM

here are a few pics of some of the parts requested so far. i'll post a better picture of the grill as well. Tony

ortegamotor · 05-25-2011, 10:03 PM

here are a few more to help you decide if you want to buy the parts. notice how clean those wing windows are, and the Fender badges. I've never even seen these type. I can't even find them re-poped. Tony

Legolas894 · 05-25-2011, 10:03 PM

For the steering wheel, shipping to 14305 (Niagara Falls, NY). Paypal ok?

Thanks

Jason

budnikguy · 05-25-2011, 10:11 PM

appreciate the extra pics...please keep in mind the order of dibs (daunting task) for wanted parts

rawraw67 · 05-25-2011, 10:14 PM

I will take the hood

Leroy-B1 · 05-25-2011, 10:17 PM

So whats the price on the fender badges?
Posted via Mobile Device

ortegamotor · 05-25-2011, 10:54 PM

Budnickguy is right let me get to the business at hand.

Leroy-B1 - was looking at the fender badges , $50.00 plus shipping so lets say $55,00

Raw Raw 67- the hood is your if you want it. you will be very please with the condition of the hood. i see you're in the Bay Area so a local pick up will work.

i am on PayPal ( ortegamotor@yahoo.com) just note what you're wanting to buy so i can keep it straight. thank's again you guys.

Budnickguy_- Exterior door handles and the rear view mirror . $60/ shipped no pitting .

2002 yanks - the grill has a small hole drilled in the front but it's straight and solid.

chevy 4 life R F FENDER - it's solid and straight you're looking at $165.00 shipped.

Upgrade- sorry no key for that ignition. but i think i have another with a key.

05-25-2011, 02:34 PM	#1
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Parting a 1967 GMC 1/2 great parts to be had Parting out a 1967 long bed . there is no motor or tranny in the truck. every thing you see in the pictures is there. the fenders , hood and doors are solid and straight , all the glass is good shape as well. fender r/l $100. ea PASS SIDE SOLD, STILL HAVE DRIVER SIDE THERE ARE STILL PARTS ALOT OF GREAT PARTS !!!! doors are still available r/l $ 100.ea hood no dents no rust. $75. [C steering wheel with GMC emblem $50 SOLD complete bed it's actually in real good shape very straight. $200 complete. there is no tail gate windshield and back glass $50 ea. just PM me with any other questions . Attached Images Last edited by ortegamotor; 10-13-2011 at 08:07 PM.

05-25-2011, 02:36 PM	#2
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had Parting out a 1967 long bed . there is no motor or tranny in the truck. every thing you see in the pictures is there. the fenders , hood and doors are solid and straight , all the glass is good shape as well. fender r/l $100. ea doors r/l $ 100.ea hood no dents no rust. $75. grill $60 steering wheel with GMC emblem $50 complete bed it's actually in real good shape very straight. $200 complete. there is no tail gate windshield and back glass $50 ea. just PM me with any other questions . thanks for your time. Tony Attached Images Last edited by ortegamotor; 06-02-2011 at 12:49 PM.

05-25-2011, 03:15 PM	#3
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Parting a 1967 GMC 1/2 great parts to be had How much for the fender badges? Posted via Mobile Device

05-25-2011, 03:42 PM	#4
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Parting a 1967 GMC 1/2 great parts to be had do you have knobs and retainers for the light switch and the wipers? I also need the glove box locking latch that screws into the dash. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

05-25-2011, 03:58 PM	#6
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Parting a 1967 GMC 1/2 great parts to be had hows the grille(any damage)? can you post a better pic(if damage pics of it)? interested depending on shipping cost and new pics. do you have the light bezels for it?

05-25-2011, 04:28 PM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: Parting a 1967 GMC 1/2 great parts to be had Got a cig lighter? Really just need the knob part. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-25-2011, 04:40 PM	#8
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: Parting a 1967 GMC 1/2 great parts to be had How much for the right front fender shipped to 89014? Thanks, Jay

05-25-2011, 04:42 PM	#9
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Parting a 1967 GMC 1/2 great parts to be had do you have the key to the ingition switch if so how much? Last edited by UP GRADE; 05-26-2011 at 07:07 PM.

05-25-2011, 05:03 PM	#10
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Parting a 1967 GMC 1/2 great parts to be had interested in passenger side inner fender if not eaten up and driver fender if in good shape. any rust? Thanks Rob

05-25-2011, 05:53 PM	#11
Legolas894 Chemist under the hood... Join Date: Apr 2009 Location: Fort Erie,ON, Canada Posts: 617	Re: Parting a 1967 GMC 1/2 great parts to be had What's the steering wheel like under the wrap? __________________ Current fleet: 2013 GMC Sierra, 5.3L, 4x4 1988 GMC Sierra, 305, Auto 1984 Jeep Grand Wagoneer, 360 V8 1997 VW Cabrio, 2.0L 2017 Toyota Rav4, 2.5L Stuff I wish I still had: 2013 Toyota Matrix [RIP] 1967 GMC 910 Fleetside, 283 V8 [1st Love-SOLD] 1987 Jeep Cherokee Laredo 4X4, 4.0 I-6 [SOLD} 1994 Chevrolet Caprice Classic, 5.7LV8 [SOLD] 1995 Chevrolet Astro AWD, 4.3L V6 (RIP) 1998 Chevrolet Suburban 4x4, 5.7L V8 [SOLD]

05-25-2011, 07:16 PM	#12
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1967 GMC 1/2 great parts to be had I'd like to get in line for grille and headlight bezels. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-25-2011, 07:17 PM	#13
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had Yellow GT: so $ 10 for the knobs and latch , wheres it going? tony Re: Parting a 1967 GMC 1/2 great parts to be had do you have knobs and retainers for the light switch and the wipers? I also need the glove box locking latch that screws into the dash. __________________

05-25-2011, 07:22 PM	#14
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1967 GMC 1/2 great parts to be had Is there a tailgate with small GMC letters? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-25-2011, 07:50 PM	#15
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: Parting a 1967 GMC 1/2 great parts to be had put me in line for both fenders if you are willing to ship.

05-25-2011, 08:02 PM	#16
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Parting a 1967 GMC 1/2 great parts to be had I am interested in the heater controls. I could get them when I come for the blazer doors.



Register or Log In To remove these advertisements.

05-25-2011, 08:08 PM	#17
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Parting a 1967 GMC 1/2 great parts to be had I'd like to be in line for the steering wheel too, depending on condition.

05-25-2011, 09:14 PM	#18
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Parting a 1967 GMC 1/2 great parts to be had how much for the vent windows, wing windows, port windows, what ever they call them. do they have good chrome glass and rubber? can i see some pics? thanks rick

05-25-2011, 09:51 PM	#19
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had here are a few pics of some of the parts requested so far. i'll post a better picture of the grill as well. Tony Attached Images

05-25-2011, 10:03 PM	#20
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had here are a few more to help you decide if you want to buy the parts. notice how clean those wing windows are, and the Fender badges. I've never even seen these type. I can't even find them re-poped. Tony Attached Images

05-25-2011, 10:11 PM	#22
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Parting a 1967 GMC 1/2 great parts to be had appreciate the extra pics...please keep in mind the order of dibs (daunting task) for wanted parts

05-25-2011, 10:14 PM	#23
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: Parting a 1967 GMC 1/2 great parts to be had I will take the hood

05-25-2011, 10:17 PM	#24
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Parting a 1967 GMC 1/2 great parts to be had So whats the price on the fender badges? Posted via Mobile Device

05-25-2011, 10:54 PM	#25
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had Budnickguy is right let me get to the business at hand. Leroy-B1 - was looking at the fender badges , $50.00 plus shipping so lets say $55,00 Raw Raw 67- the hood is your if you want it. you will be very please with the condition of the hood. i see you're in the Bay Area so a local pick up will work. i am on PayPal ( ortegamotor@yahoo.com) just note what you're wanting to buy so i can keep it straight. thank's again you guys. Budnickguy_- Exterior door handles and the rear view mirror . $60/ shipped no pitting . 2002 yanks - the grill has a small hole drilled in the front but it's straight and solid. chevy 4 life R F FENDER - it's solid and straight you're looking at $165.00 shipped. Upgrade- sorry no key for that ignition. but i think i have another with a key.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.