Are '67-72 stock jacks safe? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dano69c10 · 06-03-2011, 07:10 PM

Seems like they would be safe to me, but my are friends telling me I should buy/use a hydralic bottle jack.
What's your guys' thoughts?
Thanx in advance
Dano

1972RedNeck · 06-03-2011, 07:15 PM

I don't think I've ever been killed by one. I don't know why they wouldn't be safe.

**leddzepp** · 06-03-2011, 07:22 PM

i use mine all the time, along with jackstands of course.
Posted via Mobile Device

**john** · 06-03-2011, 07:33 PM

Like anything they are only as safe as the person using it.

67chevy1series · 06-03-2011, 07:36 PM

Quote:

Originally Posted by john

Like anything they are only as safe as the person using it.

i agree with jhon, the jacking instrucktions and owners manual suggests you jack the front up under the lower a arm pivot bar, and the back under the axle tube as close as you can to the wheel so follow the last step for the front of a 4wd front axle i could imagine if you jack it up any where else that it would be unsafe

*Shane* · 06-03-2011, 09:26 PM

no such thing as a safe jack.

Longhorn Man · 06-03-2011, 09:28 PM

it's not idiot proof... not even idiot resistant. If you are an idiot...
I think your friends are confused. The bumper jacks were pretty unsafe.
With all that being said, a bottle jack would be better... however, they aren't idiot resistant either.

chipflyer · 06-03-2011, 10:04 PM

It's safe if its properly used to change a tire, which is what it was designed for. It's not safe at all if you jack something up and plan to work under it without good jack stands.

Jeff

**Stocker** · 06-03-2011, 10:12 PM

I don't think it's inherently unsafe.... just harder to use than a hydraulic bottle jack.

PanelDeland · 06-03-2011, 10:16 PM

Like any mechanical device(or non-mechanical device) they were once idiot proof.However modern wisdom has created a better class of idiot.This modern wisdom has evolved to where better idiots are produced only slightly slower than the devices which they operate.

This was once proven to me when I saw a picture of a chain saw which had a warning label on it that said"Do not stop chain with hand or genetailia".At that moment I realized that even a highly qualified lawyer with a specialty in liability law could probably not stretch his imagination that much,therefor someone had to have tried it and sued the chainsaw company.This proves that if you idiot proof something,they will create a bigger idiot.

In closing,I actually agree with chipflyer though only if the jack is in proper working order and set on a stable surface.

vectorit · 06-03-2011, 10:36 PM

The OEM jack that came with my burb was a joke.
It basically buckled trying to lift the Suburban, so maybe they are fine with a half ton short bed PU. But, in my experience the opinion I have of them are pretty low.

Hubscrub · 06-03-2011, 11:35 PM

it's about like anything else if COMMON SENSE is used, but the "educated" world we have today seems to be running low on it

but i use a modern style jack scissor jack because my OEM is missing

View Poll Results: Are stock jacks safe?
Yes, of course!	12	80.00%
No, just say no!	3	20.00%
Voters: 15. You may not vote on this poll

06-03-2011, 07:10 PM	#1
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Are '67-72 stock jacks safe? Seems like they would be safe to me, but my are friends telling me I should buy/use a hydralic bottle jack. What's your guys' thoughts? Thanx in advance Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

06-03-2011, 07:22 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Are '67-72 stock jacks safe? i use mine all the time, along with jackstands of course. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-03-2011, 07:33 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Are '67-72 stock jacks safe? Like anything they are only as safe as the person using it. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

06-03-2011, 09:26 PM	#6
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Are '67-72 stock jacks safe? no such thing as a safe jack.

06-03-2011, 09:28 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Are '67-72 stock jacks safe? it's not idiot proof... not even idiot resistant. If you are an idiot... I think your friends are confused. The bumper jacks were pretty unsafe. With all that being said, a bottle jack would be better... however, they aren't idiot resistant either.

06-03-2011, 10:04 PM	#8
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Are '67-72 stock jacks safe? It's safe if its properly used to change a tire, which is what it was designed for. It's not safe at all if you jack something up and plan to work under it without good jack stands. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

06-03-2011, 10:12 PM	#9
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,722	Re: Are '67-72 stock jacks safe? I don't think it's inherently unsafe.... just harder to use than a hydraulic bottle jack. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

06-03-2011, 10:16 PM	#10
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Are '67-72 stock jacks safe? Like any mechanical device(or non-mechanical device) they were once idiot proof.However modern wisdom has created a better class of idiot.This modern wisdom has evolved to where better idiots are produced only slightly slower than the devices which they operate. This was once proven to me when I saw a picture of a chain saw which had a warning label on it that said"Do not stop chain with hand or genetailia".At that moment I realized that even a highly qualified lawyer with a specialty in liability law could probably not stretch his imagination that much,therefor someone had to have tried it and sued the chainsaw company.This proves that if you idiot proof something,they will create a bigger idiot. In closing,I actually agree with chipflyer though only if the jack is in proper working order and set on a stable surface. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 06-03-2011 at 10:17 PM.

06-03-2011, 10:36 PM	#11
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Are '67-72 stock jacks safe? The OEM jack that came with my burb was a joke. It basically buckled trying to lift the Suburban, so maybe they are fine with a half ton short bed PU. But, in my experience the opinion I have of them are pretty low. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

06-03-2011, 11:35 PM	#12
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Are '67-72 stock jacks safe? it's about like anything else if COMMON SENSE is used, but the "educated" world we have today seems to be running low on it but i use a modern style jack scissor jack because my OEM is missing __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14 Last edited by Hubscrub; 06-03-2011 at 11:36 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.