VA NOS SB Pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman · 11-18-2009, 10:24 PM

Small block
2 groove lower crank pulley #3744043
outer crank pulley for PS #3751232
PS pump pulley #3993325

3 for $100 includes shipping

pickupman · 11-30-2009, 08:18 PM

ttt

nds1968 · 11-30-2009, 08:39 PM

I am going to put power steering on my 67. It has a stock 283 non a/c. I bought the pump and bracket but I need the crank pulley. I have researched the pulley some at the Chevy dealer and came up with the 3744043 2 grove. Are you saying that I need the 3751232 add on pulley for PS?

Thanks Nate

pickupman · 11-30-2009, 09:30 PM

all of the original setups for the 67-72 SB that I have seen had a 2 pc crank pulley for the PS. PS was a seperate pulley I may be wrong I am sure someone on here can let us know.

robs71k5 · 12-01-2009, 11:26 PM

You are correct the add on pully is for an ac truck. But the crank shaft pully will dictate that you need to run the orig power steering and water pumps wich is a short shaft waterpump and you can buy the water pump pulley easily

robs71k5 · 12-01-2009, 11:34 PM

Guess we should clarify that the crank pully your looking for is shallow the 2groves are right next to the harmonic balancer. Alot of the ones I noticed are away from the balancer about 1 1/2 to 1 3/4 inches .Those are the ones you dont want

nds1968 · 12-01-2009, 11:47 PM

Quote:

Originally Posted by robs71k5

You are correct the add on pully is for an ac truck. But the crank shaft pully will dictate that you need to run the orig power steering and water pumps wich is a short shaft waterpump and you can buy the water pump pulley easily

I am confused and my research has conflicting info. What I have; small block 283 non a/c, non power steering. The crank pulley is a single grove. I am adding the factory power steering pump that bolt on the driver side bottom. Now I will need a crank pulley to accommodate the power steering belt.

My research has been conflicting but has a single grove plus a double grove pulley bolted together. So one grove will not be used in the middle.

My PS pump pulley part # is 3993325

nds1968 · 12-02-2009, 10:27 PM

Are you willing to split these up? I don't need the PS pump pulley.

robs71k5 · 12-04-2009, 01:07 AM

The cranck shaft pulley your looking for has two grooves and you will need them both. One for your Crank to power steering and another one for your crank, water pump, and altenator. The crank shaft pulley is a 2 groove with an add on for an A/C truck .If you dont want to add it thats fine .Wich means you will have two grooves on the crankshaft to opeerate water pump Alt and power steering ,Your done if all the belts line up and you might have an issue with that if you dont have the right waterpump and pully. You need the short shaft water pump and a two groove pully for it

nds1968 · 12-04-2009, 05:42 PM

This is the kind of set up I am looking for. I notice some crank pulleys are cast and some are stamped. Either one is fine with me.

http://67-72chevytrucks.com/vboard/s...24#post3649824

pickupman · 12-04-2009, 06:12 PM

I will try to post some pics tomorrow. I can split them up. I am sure these are the ones you are needing though

pickupman · 12-05-2009, 05:42 PM

I have misplaced the double outside pulley but have it somewhere. But this one is for an ac truck. The crank pulley is a single back one and this one goes on it for the power steering. the one on the left is the add on pulley the RH one is used.

pickupman · 12-05-2009, 05:47 PM

picture of pump pulley

rsavage · 12-05-2009, 06:28 PM

I do not think NDS1968 wants the deep dish pulley. If he has a single crank pulley ( and no ac) he will need a single shallow pulley that will bolt onto the existing single crank pulley as it has two raised locators on it that fit in holes on the new pulley. He will use the same three bolts that hold the single pulley to bolt both on the harmonic balancer. The PS pulley goes on the pump with the groove closest to the pump housing.

pickupman · 12-05-2009, 07:11 PM

that is what this pulley is

nds1968 · 12-05-2009, 09:01 PM

Quote:

Originally Posted by pickupman

I have misplaced the double outside pulley but have it somewhere. But this one is for an ac truck. The crank pulley is a single back one and this one goes on it for the power steering. the one on the left is the add on pulley the RH one is used.

How much for this setup shipped to 15227.
Thanks Nate

I am talking about the 3751232 pulley and the matching flat one with the locators.

pickupman · 12-05-2009, 10:44 PM

will do $45 + ship

nds1968 · 12-05-2009, 10:53 PM

Quote:

Originally Posted by pickupman

will do $45 + ship

OK sending PM.

milner · 06-03-2011, 11:58 AM

Forgive me for bringing up an old thread but I was wondering if you still have the power steering pulley #3993325?

pickupman · 06-03-2011, 09:46 PM

sorry sold

milner · 06-04-2011, 12:21 AM

Story of my life, day late and a dollar short lol. Thanks for the reply.

11-18-2009, 10:24 PM	#1
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	NOS SB Pulleys Small block 2 groove lower crank pulley #3744043 outer crank pulley for PS #3751232 PS pump pulley #3993325 3 for $100 includes shipping __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

11-30-2009, 08:18 PM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys ttt __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

11-30-2009, 09:30 PM	#4
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys all of the original setups for the 67-72 SB that I have seen had a 2 pc crank pulley for the PS. PS was a seperate pulley I may be wrong I am sure someone on here can let us know. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-01-2009, 11:26 PM	#5
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: NOS SB Pulleys You are correct the add on pully is for an ac truck. But the crank shaft pully will dictate that you need to run the orig power steering and water pumps wich is a short shaft waterpump and you can buy the water pump pulley easily

12-01-2009, 11:34 PM	#6
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: NOS SB Pulleys Guess we should clarify that the crank pully your looking for is shallow the 2groves are right next to the harmonic balancer. Alot of the ones I noticed are away from the balancer about 1 1/2 to 1 3/4 inches .Those are the ones you dont want

11-30-2009, 08:39 PM	#3
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: NOS SB Pulleys I am going to put power steering on my 67. It has a stock 283 non a/c. I bought the pump and bracket but I need the crank pulley. I have researched the pulley some at the Chevy dealer and came up with the 3744043 2 grove. Are you saying that I need the 3751232 add on pulley for PS? Thanks Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

12-02-2009, 10:27 PM	#8
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: NOS SB Pulleys Are you willing to split these up? I don't need the PS pump pulley. __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

12-04-2009, 01:07 AM	#9
robs71k5 K5drive Join Date: Nov 2004 Location: burnaby BC Canada Posts: 815	Re: NOS SB Pulleys The cranck shaft pulley your looking for has two grooves and you will need them both. One for your Crank to power steering and another one for your crank, water pump, and altenator. The crank shaft pulley is a 2 groove with an add on for an A/C truck .If you dont want to add it thats fine .Wich means you will have two grooves on the crankshaft to opeerate water pump Alt and power steering ,Your done if all the belts line up and you might have an issue with that if you dont have the right waterpump and pully. You need the short shaft water pump and a two groove pully for it

12-04-2009, 05:42 PM	#10
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: NOS SB Pulleys This is the kind of set up I am looking for. I notice some crank pulleys are cast and some are stamped. Either one is fine with me. http://67-72chevytrucks.com/vboard/s...24#post3649824 __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

12-04-2009, 06:12 PM	#11
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys I will try to post some pics tomorrow. I can split them up. I am sure these are the ones you are needing though __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-05-2009, 05:42 PM	#12
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys I have misplaced the double outside pulley but have it somewhere. But this one is for an ac truck. The crank pulley is a single back one and this one goes on it for the power steering. the one on the left is the add on pulley the RH one is used. Attached Images __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-05-2009, 05:47 PM	#13
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys picture of pump pulley Attached Images __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-05-2009, 06:28 PM	#14
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: NOS SB Pulleys I do not think NDS1968 wants the deep dish pulley. If he has a single crank pulley ( and no ac) he will need a single shallow pulley that will bolt onto the existing single crank pulley as it has two raised locators on it that fit in holes on the new pulley. He will use the same three bolts that hold the single pulley to bolt both on the harmonic balancer. The PS pulley goes on the pump with the groove closest to the pump housing.

12-05-2009, 07:11 PM	#15
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys that is what this pulley is __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-05-2009, 10:44 PM	#17
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys will do $45 + ship __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed



Register or Log In To remove these advertisements.

06-03-2011, 11:58 AM	#19
milner Registered User Join Date: Jun 2003 Location: Mandan,ND Posts: 268	Re: NOS SB Pulleys Forgive me for bringing up an old thread but I was wondering if you still have the power steering pulley #3993325? __________________ 355,vortec heads, Doug Herbert cam, Performer intake, 750 Holley, Hooker Comps, 2 1/2 duals w/Aero Chambers, 2500 stall and 3.73 posi.

06-03-2011, 09:46 PM	#20
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: NOS SB Pulleys sorry sold __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

06-04-2011, 12:21 AM	#21
milner Registered User Join Date: Jun 2003 Location: Mandan,ND Posts: 268	Re: NOS SB Pulleys Story of my life, day late and a dollar short lol. Thanks for the reply. __________________ 355,vortec heads, Doug Herbert cam, Performer intake, 750 Holley, Hooker Comps, 2 1/2 duals w/Aero Chambers, 2500 stall and 3.73 posi.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.