NY Fleetside sport bumper with brackets and bolts

[2002yanks]

sold


fleetside sport bumper with set of new brackets(ebay) and new chrome bolt kit(both bumper and plate box from summitt). bumper will need sanding and re polishing, or leave it for that patina looking truck(thats what i was planing for now). the license plate box has 1 corner tweeked, will straighten out easily). wanting to go with a roll pan instead. $200(about what i have in it).

[VA72C10]

would you sell and ship just brackets and bolts? If so, how much to 23112? Thanks

[2002yanks]

Originally Posted by VA72C10

would you sell and ship just brackets and bolts? If so, how much to 23112? Thanks

let me give it a few days to see if i can sell as 1 first. dont really want to sell them then end up with the bumper and have to buy them again to run this. i paid $65+$20+$15 plus shipping for them so i would be looking at $110 shipped for them seeing they are still brand new.

on a side note i would trade for a roll pan and $$ for the setup.

[m6z]

how much for just the bumper shipped to 66762?

[2002yanks]

i am thinking $100 plus shipping ups shows 37.20 for a package 78*10*6 weighing 25lbs. one thing if you look closely under the installed bolt shown(lower right sode of it) you can see a small dent like push out. dont know if thats how they are or not, but it looks like its from the bracket. its right where the corner of the bracket is(both sides thats why i ask if they are all like it). it would actually sand down(then buff/polish out). still a nice original bumper. i planed on running how it is for a while.

[LUCKTRUCK]

GM or aftermarket bumper?

[2002yanks]

Originally Posted by LUCKTRUCK

GM or aftermarket bumper?

as far as i know its gm. has these #`s stamped on bottom edge R-DOT TKY-92-8-A

[m6z]

[quote=2002yanks;4762947]fleetside sport bumper with set of new brackets(ebay) and new chrome bolt kit(both bumper and plate box from summitt). bumper will need sanding and re polishing, or leave it for that patina looking truck(thats what i was planing for now). the license plate box has 1 corner tweeked, will straighten out easily). wanting to go with a roll pan instead. $200(about what i have in it).QUOTE]

Originally Posted by 2002yanks

as far as i know its gm. has these #`s stamped on bottom edge R-DOT TKY-92-8-A

In you first post you state that the plate box and bumper are from summit and then you state that you think its a gm bumper. Which is it? aftermarket or factory? Do you have a pic of the backside? Still interested. Price seem fair for a GM bumper.

[2002yanks]

[quote=m6z;4764076]

Originally Posted by 2002yanks

fleetside sport bumper with set of new brackets(ebay) and new chrome bolt kit(both bumper and plate box from summitt). bumper will need sanding and re polishing, or leave it for that patina looking truck(thats what i was planing for now). the license plate box has 1 corner tweeked, will straighten out easily). wanting to go with a roll pan instead. $200(about what i have in it).QUOTE]




In you first post you state that the plate box and bumper are from summit and then you state that you think its a gm bumper. Which is it? aftermarket or factory? Do you have a pic of the backside? Still interested. Price seem fair for a GM bumper.

the new brackets were from ebay and the new bolts were from summit. picked up the bumper used. sorry for the misunderstanding.

[72peace]

[quote=m6z;4764076]

Originally Posted by 2002yanks

fleetside sport bumper with set of new brackets(ebay) and new chrome bolt kit(both bumper and plate box from summitt). bumper will need sanding and re polishing, or leave it for that patina looking truck(thats what i was planing for now). the license plate box has 1 corner tweeked, will straighten out easily). wanting to go with a roll pan instead. $200(about what i have in it).QUOTE]




In you first post you state that the plate box and bumper are from summit and then you state that you think its a gm bumper. Which is it? aftermarket or factory? Do you have a pic of the backside? Still interested. Price seem fair for a GM bumper.

The R-DOT means it is a replacement part that has been approved by the Department of Transportation, something most insurance companies insist on, but it is not an original part. I recently backed into a light pole and had to have my bumper replaced. Mine also has the R-DOT imprinted and is considered an original "replacement" part. Not all R-DOT parts come from the car manufacturer. Hope this helps.

Cheers,

[2002yanks]

[quote=72peace;4764665]

Originally Posted by m6z

The R-DOT means it is a replacement part that has been approved by the Department of Transportation, something most insurance companies insist on, but it is not an original part. I recently backed into a light pole and had to have my bumper replaced. Mine also has the R-DOT imprinted and is considered an original "replacement" part. Not all R-DOT parts come from the car manufacturer. Hope this helps.

Cheers,

thanks for the info. i picked it up used so i wasnt sure.

[m6z]

[quote=2002yanks;4764099]

Originally Posted by m6z

the new brackets were from ebay and the new bolts were from summit. picked up the bumper used. sorry for the misunderstanding.

[quote=72peace;4764665]

Originally Posted by m6z

The R-DOT means it is a replacement part that has been approved by the Department of Transportation, something most insurance companies insist on, but it is not an original part. I recently backed into a light pole and had to have my bumper replaced. Mine also has the R-DOT imprinted and is considered an original "replacement" part. Not all R-DOT parts come from the car manufacturer. Hope this helps.

Cheers,

Ok, thanks.

I'm going to pass on the bumper.

[68 IRON]

Yank, could I get a quote to 98501 and pics?

[2002yanks]

Originally Posted by 68 IRON

Yank, could I get a quote to 98501 and pics?

are you interested in it all? what pics do you need?

[68 IRON]

Ya, I'm interested but not all the way in. I guess the pics were blocked at work. I see them here at home fine. For now, what would be your best guess to ship cross country?

[2002yanks]

i`m guessing $50 to ship(was $40 to ship just the bumper half way across the us). i would do $230 shipped on the lot and i`ll cover the rest of the shipping

[2002yanks]

bump back up

[72peace]

Being R-DOT doesn't mean there's anything wrong with the bumper, just that it's not original to the period. Because it has the R-DOT means it's a good part some repops don't have the R-DOT. If it were OEM or NOS it would be more expensive.

Bump TTT

Cheers,

[2002yanks]

Originally Posted by 72peace

Being R-DOT doesn't mean there's anything wrong with the bumper, just that it's not original to the period. Because it has the R-DOT means it's a good part some repops don't have the R-DOT. If it were OEM or NOS it would be more expensive.

Bump TTT

Cheers,

thanks for that bit of info. going to drop it down to $175 for all items.

[Cameron 1137]

is that shipped? i'm in Pittsfield Ma, 01201

[2002yanks]

Originally Posted by Cameron 1137

is that shipped? i'm in Pittsfield Ma, 01201

sorry, but that was just the price without shipping. i would do $200 shipped on it to you. i will cover anything over the 25 in shipping cost. going to run 40 or so plus boxing fees.

[Cameron 1137]

do you have four(4) mounting brackets? and do you take paypal?

[Cameron 1137]

oh and hardware to mount brackets to frame?

[2002yanks]

Originally Posted by Cameron 1137

do you have four(4) mounting brackets? and do you take paypal?

yes i have all 4 brackets 2 were loosely bolted to the bumper to prop it up for pic. it comes with bumper, 4 brackets with bolts to mount to frame, set of 4 chrome bolts for bumper and set of 4 chrome bolts to mount plate box. yes i take paypal. i just ask to send as a gift so i dont get hit with the 3% fees or add 3% to cover them. just add address to the notes section. paypal is kmalone02@verizon.net thanks!
Kevin

[Cameron 1137]

Payment sent. i sent as payment for goods, and added the 3%