quick HEI wire ?'s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 06-30-2011, 02:48 PM

My HEI dizzy is wired to the red wire (cant remember wich) I was reading somewere that it should be wired STRAIGHT to the fusebox?

Am i missing out on driveability/performance here? If I should rewire it, what guage of wire? Thanks

**LockDoc** · 06-30-2011, 02:54 PM

-
I'm thinking that will work fine. It should be the switched connector from the Ignition switch. (if that makes any sense)..

Lockdoc

FLDBRED · 06-30-2011, 03:16 PM

Year One sells the proper wire with the right connections on each side,the fuse box juction side is a spade terminal.It makes the HEI swap clean and easy!

oldblue1968chevy · 06-30-2011, 04:05 PM

I was reading somewere that it needs to be ran STRAIGHT to the fusebox etc I dunno where this wire goes on the other side, just thought id ask the forum

FLDBRED · 06-30-2011, 05:07 PM

That box is the other side of your fuse box,you are ok! The part # for the Year One wire is LOO510 =$9.20, the tach feed line is LOO515. If your hook up is direct with no splicing then you don't need them!

06-30-2011, 02:48 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	quick HEI wire ?'s My HEI dizzy is wired to the red wire (cant remember wich) I was reading somewere that it should be wired STRAIGHT to the fusebox? Am i missing out on driveability/performance here? If I should rewire it, what guage of wire? Thanks Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

06-30-2011, 02:54 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,068	Re: quick HEI wire ?'s - I'm thinking that will work fine. It should be the switched connector from the Ignition switch. (if that makes any sense).. Lockdoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-30-2011, 03:16 PM	#3
FLDBRED Registered User Join Date: Jun 2009 Location: CENTRAL,NJ Posts: 586	Re: quick HEI wire ?'s Year One sells the proper wire with the right connections on each side,the fuse box juction side is a spade terminal.It makes the HEI swap clean and easy!

06-30-2011, 04:05 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: quick HEI wire ?'s I was reading somewere that it needs to be ran STRAIGHT to the fusebox etc I dunno where this wire goes on the other side, just thought id ask the forum __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

06-30-2011, 05:07 PM	#5
FLDBRED Registered User Join Date: Jun 2009 Location: CENTRAL,NJ Posts: 586	Re: quick HEI wire ?'s That box is the other side of your fuse box,you are ok! The part # for the Year One wire is LOO510 =$9.20, the tach feed line is LOO515. If your hook up is direct with no splicing then you don't need them!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.