Custom door panels, seats etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Digger51 · 07-29-2003, 03:31 PM

I have built some pretty trick street rod style door panels for my 70 GMC and think there might be a markety for them. Also, I must admit that I used to do design for a very well-known (and unnamed) builder so they are not just knucklehead in the garage crap.

I am just looking for some feedback on the interest level. Don't give me your email or anything like that, I'm not trying to sapm the board, just gauge interest.

Thanks for your input.

Slammed67 · 07-29-2003, 04:02 PM

We'd need some pictures of your product in order to give some feedback.

Digger51 · 07-29-2003, 07:54 PM

Here is a photo of a set of panels. They are grey tweed, it does not photograph well.

Thanks

FRENCHBLUE72 · 07-29-2003, 08:08 PM

Look's pretty good any other grafic pattern's.

Digger51 · 07-29-2003, 08:27 PM

I have a total of eight different inserts but the ones in the picture are the only ones assembled thus far.

There are also matching inserts for the console.

DR67 · 07-29-2003, 08:41 PM

Looks pretty good, I would like to see pictures of your others when you get them.

DR67

big blue 72 · 07-29-2003, 10:20 PM

More pics . Please

DanoDMano · 07-29-2003, 11:11 PM

Very Nice.

68LSS1 · 07-29-2003, 11:31 PM

I'd like to see more pix also.

Primered_69 · 07-30-2003, 11:32 AM

Yeah I would be interested in them.

sweet n rare67 · 07-30-2003, 03:29 PM

I like them a lot! nice work.

Digger51 · 07-31-2003, 09:14 AM

Here are a couple of detail shots that show the stitching.

Digger51 · 07-31-2003, 09:16 AM

The front of the panel and insert.

fire_chick · 07-31-2003, 09:50 AM

looks pretty good!

Primered_69 · 07-31-2003, 11:50 AM

about where would the holes for the door latch and window crank go?

progress · 07-31-2003, 01:15 PM

If those are grey and burgandy they will match my '67 short stepside. Send them to me and I will put them on and take them to the show and shine and get some orders! They will really stand out on my truck since they will be the only finished item on it...LOL!

Seriously...they look great...I am sure you would find a ready market for them.

wild4wheels · 07-31-2003, 02:31 PM

If you could be competetive price-wise with roddoors.com, I'd have an interest.

paintpyro · 07-31-2003, 03:46 PM

Did you work for Sewfine?

Digger51 · 07-31-2003, 06:33 PM

THe holes for the door and window cranks are in the hard portion of the panel, I just have not cut the upholstery for access. This set has the insert right over wher the window crank goes as I buil it for my truck which has power windows.

mooneyes · 07-31-2003, 07:21 PM

....what kind of $ are you going to be looking to get?

Digger51 · 07-31-2003, 07:39 PM

I am not sure - I think they might go for around $150 and a little extra for the carpet kick panels. I think I can also build a panel that would cover the entire door rather than separate door panel/kick panel pieces.

If I start selling them I would offer complete matching interiors (panels, upholstery, carpet kits) or parts on an ala-carte basis.

tim m · 08-01-2003, 09:55 AM

I am looking for the whole kit. I want the door panels to go over the entire door, Carpet , I would like to get that so it goes up to the back window, and material so I can do the rest of the cab.

07-29-2003, 03:31 PM	#1
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	Custom door panels, seats etc. I have built some pretty trick street rod style door panels for my 70 GMC and think there might be a markety for them. Also, I must admit that I used to do design for a very well-known (and unnamed) builder so they are not just knucklehead in the garage crap. I am just looking for some feedback on the interest level. Don't give me your email or anything like that, I'm not trying to sapm the board, just gauge interest. Thanks for your input. __________________ 70 GMC, SWB, 2WD, low

07-29-2003, 04:02 PM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	We'd need some pictures of your product in order to give some feedback. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

07-29-2003, 07:54 PM	#3
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	Photo Here is a photo of a set of panels. They are grey tweed, it does not photograph well. Thanks Attached Images __________________ 70 GMC, SWB, 2WD, low

07-29-2003, 08:08 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Look's pretty good any other grafic pattern's. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-29-2003, 08:27 PM	#5
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	More patterns I have a total of eight different inserts but the ones in the picture are the only ones assembled thus far. There are also matching inserts for the console. __________________ 70 GMC, SWB, 2WD, low

07-29-2003, 08:41 PM	#6
DR67 Registered User Join Date: Feb 2002 Location: Knoxville, Tn. USA Posts: 205	Looks pretty good, I would like to see pictures of your others when you get them. DR67 __________________ Dave Knoxville,Tn.

07-29-2003, 10:20 PM	#7
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	More pics . Please

07-29-2003, 11:11 PM	#8
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Very Nice. __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

07-29-2003, 11:31 PM	#9
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	I'd like to see more pix also. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

07-30-2003, 11:32 AM	#10
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Yeah I would be interested in them. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

07-30-2003, 03:29 PM	#11
sweet n rare67 Young truck fanatic Join Date: Jun 2003 Location: The wonderful Mat-Su Valley....Palmer, Ak Posts: 253	I like them a lot! nice work.

07-31-2003, 09:14 AM	#12
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	More Photos Here are a couple of detail shots that show the stitching. Attached Images __________________ 70 GMC, SWB, 2WD, low

07-31-2003, 09:16 AM	#13
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	One More The front of the panel and insert. Attached Images __________________ 70 GMC, SWB, 2WD, low

07-31-2003, 09:50 AM	#14
fire_chick Registered User Join Date: Jul 2003 Location: Manitoba Posts: 17	looks pretty good! __________________ 1970 chevy 1/2 ton 2001 firebird

07-31-2003, 11:50 AM	#15
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	about where would the holes for the door latch and window crank go? __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)



Register or Log In To remove these advertisements.

07-31-2003, 01:15 PM	#16
progress Gotta luv a clean shave Join Date: Jan 2002 Location: Kent, WA Posts: 226	If those are grey and burgandy they will match my '67 short stepside. Send them to me and I will put them on and take them to the show and shine and get some orders! They will really stand out on my truck since they will be the only finished item on it...LOL! Seriously...they look great...I am sure you would find a ready market for them. __________________ Welding while you wait...you can help if you like and it...might even save you a little as long as you don't mess things up! We make house calls too...just like the old days!

07-31-2003, 02:31 PM	#17
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	If you could be competetive price-wise with roddoors.com, I'd have an interest. __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

07-31-2003, 03:46 PM	#18
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Did you work for Sewfine? __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

07-31-2003, 06:33 PM	#19
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	Door & Window THe holes for the door and window cranks are in the hard portion of the panel, I just have not cut the upholstery for access. This set has the insert right over wher the window crank goes as I buil it for my truck which has power windows. __________________ 70 GMC, SWB, 2WD, low

07-31-2003, 07:21 PM	#20
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	....what kind of $ are you going to be looking to get? __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

07-31-2003, 07:39 PM	#21
Digger51 Registered User Join Date: Apr 2000 Location: Littleton, CO Posts: 51	Price I am not sure - I think they might go for around $150 and a little extra for the carpet kick panels. I think I can also build a panel that would cover the entire door rather than separate door panel/kick panel pieces. If I start selling them I would offer complete matching interiors (panels, upholstery, carpet kits) or parts on an ala-carte basis. __________________ 70 GMC, SWB, 2WD, low

08-01-2003, 09:55 AM	#22
tim m Registered User Join Date: Mar 2001 Location: Gilbert Az Posts: 286	I am looking for the whole kit. I want the door panels to go over the entire door, Carpet , I would like to get that so it goes up to the back window, and material so I can do the rest of the cab. __________________ 1970 k10 1971 C10 Gilbert Az

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.